The one I have needs the LVA to be reset each time I connect. I discovered that if I "long press" on the desired warning voltage, it will remember that value. I set to 3.4 for ordinary LiPo's and 3.5 for Graphene LiPO's since their voltage can stay high then drop quickly at the end of a long flight.
Why can't some videos like this one be to the point, without unnecessary info and not repetitive. This one could well have been half its length and got the info across equally well.
Can the monitor be left connected to the pack in storage without draining it down if the leftmost ground wire is disconnected? I'm looking to use it use for a momentary battery check without haven't to connect and disconnect it each time. A pushbutton for the ground lead to turn it on maybe, but that's only if the unit doesn't draw power from the cells in that case.
Is it set only once for the minimum voltage alarm threshold (let's say we set it at 3.6 V) or does it need to be reset every time the battery is plugged in?
Thanks for refreshing my memory without a long winded explanation . I wish more people would just explain without all the needless talk
Thanks for the demo video! It made it easier for me to make a choice when shopping.
Cool vid iv just ordered a couple of these an this vid showed how to use it so thanks
Great bid now I know how to work this little bastard 😁 thank you 😁
Good guide. Thanks from Tennessee!
Very good concise presentation Maddy. Thanks
its a thump up from me....thank you Sir.
The one I have needs the LVA to be reset each time I connect.
I discovered that if I "long press" on the desired warning voltage, it will remember that value.
I set to 3.4 for ordinary LiPo's and 3.5 for Graphene LiPO's since their voltage can stay high then drop quickly at the end of a long flight.
Why can't some videos like this one be to the point, without unnecessary info and not repetitive. This one could well have been half its length and got the info across equally well.
The display used is common anode or common cathode type? I want to change it's display
Thanks for the great presentation, really helpful. Cheers
Can the monitor be left connected to the pack in storage without draining it down if the leftmost ground wire is disconnected?
I'm looking to use it use for a momentary battery check without haven't to connect and disconnect it each time. A pushbutton for the ground lead to turn it on maybe, but that's only if the unit doesn't draw power from the cells in that case.
thanks for the tutorial, very helpful
Is it set only once for the minimum voltage alarm threshold (let's say we set it at 3.6 V) or does it need to be reset every time the battery is plugged in?
thanks you sir!!
tnx 4 vid
do we have to plug battery in it all the time or the time we have to check the voltage
Nice How-to video. Thanks
Nice video very helpfull. Cheers
Great thanks
Is it working on inverter 150AH battery?
So my lipos are 2cell 2700mah 7.4v - so, how would I set these for my batteries? What would be the cut-off minimum voltage for using this?
Thank you!
set 3.2 for lowbat indicator
Wait? So do you land your quad and test the battery, or do you just let it dangle of the battery while flying?
Yes flying quads or planes with this device attached. The alarm is pretty much loud. You can hear the beep easily from more than 80 meters distance.
Tyvm
Can it be used for a lead acid battery?
I Have a 1s battery it says All 3.77, 1cell 3.93 Which is true one?
3.77 or 3.93 please help.
Lol
Maybe math is not its forte.
Seems easy enough to get a tie breaker by getting a dmm and actually measuring the voltage while connected.
How much is the safe voltage for lipo in minimum load, i set mine to 3.70, is it safe?
Yes it is safe, but do not let it go below 3.0 V you may not able to revive it again then.
Any reason the volts are different on this than on betaflight?
Can we use it on lithium batteries?
Hello, good video ! Can it save the minimum voltage alarm after unplug the battery?
No, you need set everytime.
only lipo battery can be tested from this or i can test any battery?
My understanding is only LiPo - those are all I have.
#maddy_ny how much voltage contains each one cell??
Good insurance only for $9.99 Aus
boughr 20 of theese for a project not one i repeat not one of them is working properly
Are the readings all off? Or the display doesn't come on?
Dont be so shy, talk to us
They are not accurate the alarm has value