Usually if one is not available, I like to use another one from a similar phone and modify it if needed (cut it down to size etc). The adhesive roles I have not had the best results with but here is a video explaining a bit more. ruclips.net/video/T4iiPUIM7-Y/видео.html
You can use glue for screens, as it allows simple application. You only have to leave it be for 24 hours. Double sided tape is certainly not recommended. If you´re gonna have to disassemble it again in the future, it will give you much harder time.
Hi my friend thanks for the video. Quick question trying to repair my phone but the replacement i bought doesnt come with the silver piece that has thebgrey cross in the bottom.left corner or the onenwith the black cross thats just below the front facing camera. Are these pieces removable?
i have a question, why my a33's back side vibrates when playing audio. exactly center part of the back above the battery and graphite pad. and the audio coming out from the down speaker seems dull to me
Thanks for the video mate, very useful. I changed the usb dock connector a few weeks ago, and since then I have a weak phone signal, should I change the red/blue antenna coaxial cables? They look ok, but maybe the contact between them and the mobo are not the best. The same day I update to One Ui 6.1, so I'm not totally sure where is the problem.
make sure the sub board is the correct model. There are different region models for the sub boards with different antenna contacts on them. If you replace it with one that is a different region version, you will run into signal issues. You're phone model SM-A.... rest should match what sub board version you get.
You are right. I just tried with the old one, and I don't have any connection issues. The new one I ordered is the right one for my model, SM-A336B but the P/N is different than the original one. I just ordered a (second) new one with the same P/N than the original dock connector. Let's see if I'm luckier this time. Thanks for your help mate
Hello sir can you help me I was fixing my phone and the screws aren't spinning you know and now it's stripped idk how can I remove them no one helps can you please help?
Yes you can purchase it and replace it with the defective one. Here is a link: www.ebay.com/itm/255985534209?hash=item3b99ed4501:g:RhcAAOSwQBxjon8T&amdata=enc%3AAQAIAAAA0CWMFgq11ER%2BKuqBeeCJBqDFd0CZXhhmIOm7vRk1hJ888mlWlcl2PGlVtfUF23mFxRWRRCGFwh2PDGNfpEvIim0JG5dyEr4GfgLsZfs6dnrpc7UN0Q1RgXkuPqKJ6D%2Bg629mODSttEAoA0GKrzoldYgvR%2F9efyfRIkGIDO9yRzlFhgpG0XPcGzg2dR7zETsi2NQozG1%2FKAUHmge8O6IYWRu7SYwC3pBEgZMv4lWHTX70lN%2Fe3ClstZQx40j6SPEcSeey4f3ljc%2B0hHkR%2Fc7TBN8%3D%7Ctkp%3ABk9SR6zqv4G2Yg
decent and simple video, and may i have some advice? my phone display works fine so can i separate it from frame and install to new frame. because it is in original quality. what i use 99% alcohol or heat gun plz reply
Thanks. You can, but there is always a chance of damaging the working screen when prying it off. You can use a hair dryer since there is less of a chance of overheating and damaging it. Isopropyl alcohol can be used too if you see its too difficult but that sometimes causes the glass to partially separate from the screen layer or gets under the screen and leaves marks. So you can first try using a hair dryer to heat up the screen, and you can use a suction cup tool to help you lift up to try n get a pry tool in between the screen and frame, but don't go too deep in with the tool or you will damage the screen.
Hello, is the Galaxy A33 uses the same Main Camera module as the Galaxy A22 LTE? Because i'm trying to find a replacement camera. Thank You for your video!
Hi Sir @PBKreviews, I have this phone also Samsung A33 5G but its been more than a month since it was submerged in water and right now it doesnt even turn on but its ok since i already have a new phone. All i want is to delete all the files in it but since its already deadbot i cant delete it anymore, what I want is to PHYSICALLY REMOVE its storage/ROM but i dont know where it is located on its motherboard. Can u help me please 😢
Hi, i just have a question. My phone did not charge because of water leak for 3 months. I tried charging it several times in the past but did not worked, but not until 2 days ago. I fully charged it, and observed for 2 days, everythings seemed to work fine. I even run diagnostics, all is good. Will my a33 be fine? Also thanks for the video, the back cover has visible gaps since then
No, it's not a good idea to use it like that. Your phone can short from corrosion inside and cause it to completely die and you will lose your data. Also the battery might be bloating causing the back to come off or lift off. You will need to take it apart, dry out any water inside, use a small brush like a tooth brush to brush off any corrosion on chips or connectors and then put it back together. If anything has gone bad like the battery bloating, you will need to replace it to prevent any hazard.
That front camera it's so bad in low light. Really annoying if you are on video calls. I don't know if it's just my phone or are all the same.Can that camera be changed with a different one for a better quality?
It can allow moisture or debris into the phone fogging up your camera lens or causing other issues over time. It's not a huge issue but you can replace the adhesive with this: www.ebay.com/itm/335374364642?itmprp=cksum%3A335374364642c0e186e278c7474189cb607ae7734a97%7Cenc%3AAQAJAAABYMSBbt5JfLmj%252BdlAgetRxKsk9uNZiEHlB3hfttt0hmv1%252BpJoUCdSpe1JVf49yGC5tKtQ3g6HKD95AS2%252Bj%252BzdEev%252BQFVLBEv0%252FCdcgJMGFwLFhJ53WzLi3lqhEgvTYlFP2n6dii0kr%252BCTa3CZ07LoBuz1bIWF0E36UoD6Bg5wn9NHFdhpBSFT04Py3l3%252FewdVEQ4UQvRkkK8x38WR0JLvA3HNDfQfyOhXwzB5XwFIF8BQymNAo%252F6MEwuqZX8oLlj57FejQDMTpkfy7TKhmdbblNMZEjgziKw8I4mJinzUhp3Mx%252B2Vz294lW%252BxZRjZ2UbUD%252BD%252F8EjEJXTx55eqqIShiXiEezS6PKYyEtjMSO4ysRJc994HbCzh1nuivN7NMTJ5sUvnBzAE0c174KECFeBGimll7PWo%252BC5IG53%252BCmQA4%252BdT%252Fku%252Bs3X0tIDTosMWm3b48qymdxaXjfdP6bJDWGFOhqk%253D%7Campid%3APL_CLK%7Cclp%3A2332490&itmmeta=01HX45VBMX8TQ6ZZ0WJ1D46E68
Eagerly waiting for the year 2027 when the new European Union Battery regulation will require manufacturers to provide an easy way to replace batteries. I now have to find a replacement phone for my Nokia 8.1 just because its battery has swollen (although it's still holding the charge well). It's not easy to find a good phone with smaller screen sizes (under 6.3") these days, and also a good battery and NFC and clean-ish Android experience.
When my phone IC was damaged...lol didn't know which IC. The repair guy said in uae the entire motherboard needed repair...which I think he lied. So now I have check the phone and see which IC....how do I know which one is damaged? A lady who has no clue until I studied the phone diagram.
Shouldn't be too difficult. Use a hair dryer to heat it up and then you can use a suction cup tool to lift a portion of it up or a thin tool to get in between the frame and the back plate of the phone and then work your way around prying it off.
No Drama, no stupid music, no mumbling. (you could maybe try to speak just a tad slower?) - but otherwise, a brilliant "how-to". New sub instantly.
Thanks!
Subscribed just because how simple, straightforward and to the point your videos are. Good job!
Thanks!
I subscribed immediately your videos are simple. There's no stupid music any unnecessary long intros. Well done man!
Thanks!
Love your videos. No annoying music. Just subscribed. Thanks.
thanks! glad you enjoy them.
I feel quite satisfied with my Galaxy A33, thank you for sharing about the internal components of the device
What is the best of adhesive you can recommend for the back of phone? The pre-cut is not available in all unit...planning to use double sided type
Usually if one is not available, I like to use another one from a similar phone and modify it if needed (cut it down to size etc). The adhesive roles I have not had the best results with but here is a video explaining a bit more. ruclips.net/video/T4iiPUIM7-Y/видео.html
You can use glue for screens, as it allows simple application. You only have to leave it be for 24 hours.
Double sided tape is certainly not recommended. If you´re gonna have to disassemble it again in the future, it will give you much harder time.
@@Morpheus-pt3wq i prepare double sided for water resistance( i hope so)
Hi my friend thanks for the video. Quick question trying to repair my phone but the replacement i bought doesnt come with the silver piece that has thebgrey cross in the bottom.left corner or the onenwith the black cross thats just below the front facing camera. Are these pieces removable?
al mio se le despegó la tapa y solo se la volví a poner así por encima 😢 ¿afecta en algo que lo use así?
Excellent. New sub.
i have a question, why my a33's back side vibrates when playing audio. exactly center part of the back above the battery and graphite pad. and the audio coming out from the down speaker seems dull to me
Can't you see how cheap and poorly made this phone is? Lose parts, or cavities that vibrate is not uncommon.
Yes, it does vibrate a lot. Perhaps it has too powerful speakers (?).
Hi quick question, is it possible to damage microphone waterproof filter if you accidentally poke it with a sim ejector pin?
Hi, no you will be fine.
my coaxial cable get off with the plug from the base, is it bad ?
Quick question, it possible to add magsafe magnet behind the back cover? or is there not enough space?
Thanks for the video mate, very useful.
I changed the usb dock connector a few weeks ago, and since then I have a weak phone signal, should I change the red/blue antenna coaxial cables? They look ok, but maybe the contact between them and the mobo are not the best. The same day I update to One Ui 6.1, so I'm not totally sure where is the problem.
make sure the sub board is the correct model. There are different region models for the sub boards with different antenna contacts on them. If you replace it with one that is a different region version, you will run into signal issues. You're phone model SM-A.... rest should match what sub board version you get.
You are right. I just tried with the old one, and I don't have any connection issues. The new one I ordered is the right one for my model, SM-A336B but the P/N is different than the original one. I just ordered a (second) new one with the same P/N than the original dock connector. Let's see if I'm luckier this time. Thanks for your help mate
Good job. short and explanatory..
Thanks!
Hello sir can you help me I was fixing my phone and the screws aren't spinning you know and now it's stripped idk how can I remove them no one helps can you please help?
can i buy the charger port PCBsomwhere , and if so can i just stick it in and expect it to work?
Yes you can purchase it and replace it with the defective one. Here is a link: www.ebay.com/itm/255985534209?hash=item3b99ed4501:g:RhcAAOSwQBxjon8T&amdata=enc%3AAQAIAAAA0CWMFgq11ER%2BKuqBeeCJBqDFd0CZXhhmIOm7vRk1hJ888mlWlcl2PGlVtfUF23mFxRWRRCGFwh2PDGNfpEvIim0JG5dyEr4GfgLsZfs6dnrpc7UN0Q1RgXkuPqKJ6D%2Bg629mODSttEAoA0GKrzoldYgvR%2F9efyfRIkGIDO9yRzlFhgpG0XPcGzg2dR7zETsi2NQozG1%2FKAUHmge8O6IYWRu7SYwC3pBEgZMv4lWHTX70lN%2Fe3ClstZQx40j6SPEcSeey4f3ljc%2B0hHkR%2Fc7TBN8%3D%7Ctkp%3ABk9SR6zqv4G2Yg
Hi friend which one you recommend samsung Galaxy a53 or a33 ? And what difference are between them
A53 has slightly better cameras, but aside from that, its mainly the same. So up to you if you need the better cameras or not.
@@PBKreviews thank you very much
Well done !
👍
decent and simple video, and may i have some advice? my phone display works fine so can i separate it from frame and install to new frame. because it is in original quality. what i use 99% alcohol or heat gun plz reply
Thanks. You can, but there is always a chance of damaging the working screen when prying it off. You can use a hair dryer since there is less of a chance of overheating and damaging it. Isopropyl alcohol can be used too if you see its too difficult but that sometimes causes the glass to partially separate from the screen layer or gets under the screen and leaves marks. So you can first try using a hair dryer to heat up the screen, and you can use a suction cup tool to help you lift up to try n get a pry tool in between the screen and frame, but don't go too deep in with the tool or you will damage the screen.
@@PBKreviews thank you
Hello, is the Galaxy A33 uses the same Main Camera module as the Galaxy A22 LTE? Because i'm trying to find a replacement camera. Thank You for your video!
Hi, im not too sure but its possible
Hi Sir @PBKreviews, I have this phone also Samsung A33 5G but its been more than a month since it was submerged in water and right now it doesnt even turn on but its ok since i already have a new phone. All i want is to delete all the files in it but since its already deadbot i cant delete it anymore, what I want is to PHYSICALLY REMOVE its storage/ROM but i dont know where it is located on its motherboard. Can u help me please 😢
the rom is soldered to the board. Its under one of the covered metal shields and is similar in size and shape to the RAM.
Hi, i just have a question. My phone did not charge because of water leak for 3 months. I tried charging it several times in the past but did not worked, but not until 2 days ago. I fully charged it, and observed for 2 days, everythings seemed to work fine. I even run diagnostics, all is good. Will my a33 be fine? Also thanks for the video, the back cover has visible gaps since then
No, it's not a good idea to use it like that. Your phone can short from corrosion inside and cause it to completely die and you will lose your data. Also the battery might be bloating causing the back to come off or lift off. You will need to take it apart, dry out any water inside, use a small brush like a tooth brush to brush off any corrosion on chips or connectors and then put it back together. If anything has gone bad like the battery bloating, you will need to replace it to prevent any hazard.
@PBKreviews thanks. I'll have it checked on the weekends, and i'll turn it off for now then.
The back was opened, everything inside is intact. Thanks anyways, Godbless. All glued up already
my phones back panel is lifting up why is it lifting up
Hii mate my phone a33 5g samsung is when i charging it night its totally off display and not charging
What I can do?
It could be a bad charger, bad charger port, or bad battery not sure, you would need to test them out one by one to rule it out.
That front camera it's so bad in low light. Really annoying if you are on video calls. I don't know if it's just my phone or are all the same.Can that camera be changed with a different one for a better quality?
Usually there are software locks in addition to hardware being different (camera connector type etc) preventing one from changing the camera.
After disassembling these lot of phones...then what do you do with these phones..
I sell them after to recoup costs for purchasing phones for future videos.
Watching On My Samsung galaxy A33 5g😊😊😊😊😊Very Painful Video
lol 😊
@@PBKreviews LOL Kyun Reply Diya Shameless Ho Kya ?
can you test using a sim card tool on the top mic and see if its possible to damage anything
because today it was dark and i didn't see very well and im afraid that i damaged something
you should be fine, the mic and filter are seated above the hole and would not get damaged.
Samsung E8825 is Exynos 1280.... I see
Thank you
Thank you!!
You're welcome!
Quick question, my a33 plastic back plate got out partially due to heat , is that an issue? @pkbreviews
It can allow moisture or debris into the phone fogging up your camera lens or causing other issues over time. It's not a huge issue but you can replace the adhesive with this: www.ebay.com/itm/335374364642?itmprp=cksum%3A335374364642c0e186e278c7474189cb607ae7734a97%7Cenc%3AAQAJAAABYMSBbt5JfLmj%252BdlAgetRxKsk9uNZiEHlB3hfttt0hmv1%252BpJoUCdSpe1JVf49yGC5tKtQ3g6HKD95AS2%252Bj%252BzdEev%252BQFVLBEv0%252FCdcgJMGFwLFhJ53WzLi3lqhEgvTYlFP2n6dii0kr%252BCTa3CZ07LoBuz1bIWF0E36UoD6Bg5wn9NHFdhpBSFT04Py3l3%252FewdVEQ4UQvRkkK8x38WR0JLvA3HNDfQfyOhXwzB5XwFIF8BQymNAo%252F6MEwuqZX8oLlj57FejQDMTpkfy7TKhmdbblNMZEjgziKw8I4mJinzUhp3Mx%252B2Vz294lW%252BxZRjZ2UbUD%252BD%252F8EjEJXTx55eqqIShiXiEezS6PKYyEtjMSO4ysRJc994HbCzh1nuivN7NMTJ5sUvnBzAE0c174KECFeBGimll7PWo%252BC5IG53%252BCmQA4%252BdT%252Fku%252Bs3X0tIDTosMWm3b48qymdxaXjfdP6bJDWGFOhqk%253D%7Campid%3APL_CLK%7Cclp%3A2332490&itmmeta=01HX45VBMX8TQ6ZZ0WJ1D46E68
Is it still water proof after disassembly 😢
If you apply new original pre cut adhesive made for the phone, it should retain the water resistance.
Good job dear friend🥺❤️
Thanks! :)
Eagerly waiting for the year 2027 when the new European Union Battery regulation will require manufacturers to provide an easy way to replace batteries. I now have to find a replacement phone for my Nokia 8.1 just because its battery has swollen (although it's still holding the charge well). It's not easy to find a good phone with smaller screen sizes (under 6.3") these days, and also a good battery and NFC and clean-ish Android experience.
Nice!
Thank you :)
No thermal paste to transfer heat from the SoC to the frame, but they bothered with heat pipe? Most useless heating system in popular brand so far.
The graphite pad would transfer heat to the frame from the processor, but yeah I would prefer thermal paste and graphite film instead.
@@PBKreviews The air gap is the problem, that's why thermal paste is always proffered as transition layer. They cheap out on one small detail.
when you disassembly still waterproof or water resistant
If you re-apply the original pre cut adhesive made for the phone, it should retain the water resistance.
Good job
Thank you!
ty
Gone are the days where Samsung incripts Samsung exynos on thier chips
Still waterproof?
As long as you re-apply new original pre cut adhesive that is made for the phone, then it should retain any water resistance.
When my phone IC was damaged...lol didn't know which IC. The repair guy said in uae the entire motherboard needed repair...which I think he lied. So now I have check the phone and see which IC....how do I know which one is damaged? A lady who has no clue until I studied the phone diagram.
I'm not sure which part would need to be changed. But would require a repair center that can solder so they can replace the IC.
Vivo t1x inside plz video
I can't open the back of the phone! :(
Shouldn't be too difficult. Use a hair dryer to heat it up and then you can use a suction cup tool to lift a portion of it up or a thin tool to get in between the frame and the back plate of the phone and then work your way around prying it off.
Eska motherboard chahiye price
Samsung a33 motherboard in cost
Excelente video lástima que no se inglés
Thanks. You can turn on the CC option and select your language from auto translate to show text in your language :)
Sar samsung galaxy watch 5 teardown piles
Next: Samsung galaxy a34 5g teardown
👍
O'ZBEK TILIDA HAM BO'LSIN KO'RSATUVLAR.
👍😀😀😀🔥🔥🔥🔥💯💯💯🔥💪
👍 :)
ip 67 hai phone ma😂😂
looks worse then A 72 cause the notch is back
Why are you comparing the A33 to the A72 in the 1st place?
This is the successor of the A32...
A LOT OF LOVE AND TNK A LOT BRO FOR YOU FROM IRAQ . : " ? 100 1001 www THE END ...k
Thanks!
@@PBKreviews A LOT OF LOVE AND TNK A LOT MR...
FOR YOU FROM🇮🇶 IRAQ🇮🇶 . !!!!!!!!:"?
🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🥀🥀🥀💞💕💕🌺🌺🌺🌺 ااً 🧡💛💚💙💜🖤♥️❣️💘💝💔💌💕💞💓💗💖❤️j