I see you edited out the part when you found out you were putting the tire back on wrong lol, that's the same tire changer I have makes a world of difference, great video as always, hope to see you in T.O. at the powersports show
A trick I learned for seating beads on my big 36" jeep tires was to take the chuck off the end of the air hose. Then take the valve core out. Push the chuck onto the valve stem, like you were trying to plug the air hose into the tire like it was an attachment. You get a TON of air, way faster than through a valve with a valve core in it. Also, if you bang the sidewalls with a good shop hammer, that will help the beads to seat and it jumps you a lot less! hehe They always jump me too when the beads seat. It works pretty dang well. If not, I do the same - go to the ether and a lighter... but that's always the last resort.
With some slight modifications a rear fender off most lawn tractors will work in place of the OEM fenders. Just mount them to the rack instead of the frame.
I enjoy watching your videos, they are informative and to the point. I recently was given a 1985 Big Red atc250es that I rode at my uncles when I was a kid. It needs some love. It already has a plastic tank and Ive come to terms with that, but I was wondering where the best sites are to find parts at a decent price. I looked at a fender yesterday that wasn't even painted and they wanted $395!!!! There has to be some aftermarket site that works good for these old beasts. What do you think?
Curious how to get axel out. I loosened 4 bolts on fork. Applied wd40 to threads on axle shaft. It's not budging with a 4ft snipe. Assuming it's a normal thread. How can I get it off without breaking something?
Hi, after the last Bearing, and seal at Time 7:30 on the Video. Is There a Metal Washer that Covers the Black Seal? There is a Little Clip attached to the Outside that’s Bent over after Install. Was there a Metal Washer over the Seal? Thanks for any info or response. I appreciate the help. Great Video
Could you answer my question please? It might be obvious to you. I’m really concerned about getting an answer. Thanks again. I appreciate any info you could give
hahah crazy i just did this to my 87 big red last nite. one thing i always do is pop out one of the seals on the bearing itself and add marine grade grease into it. it really does help
hey! great stuff! I'm curious what the front tire you went with was, having a hard time sourcing a front for my 200e. Got a 25X12x9 carlisle turf buster that's all cracked. thanks!
ive got a 1985 Honda 200 es atc I put a new cam in it and when I put it all back together I have no compression at all now what could be wrong. thanks for the help
On my big red the tire moves back and forth slightly when I put it back on and rubs am I missing a part or something any idea why it would be doing that ?
please sir I need help my 84 200 m gets so hot after 3-4 minutes of driving I don't know what it is I would ask my dad but I don't have one in my life and my mom is barley around I worked so hard to buy this and an 85 with my own money and I found your youtube you are do smart with everything please help I have sll the tools as well just can't figure out what it is please give me some ideas
how do you mean it gets hot? does it seize? is it hot on your leg? if it is hot on your leg does it have the exhaust pipe shroud? is oil flowing? Maybe clean your oil filter.
PowerModz it's right by the engine where exhaust starts some oil looks like it comes out the top of the engine and exhaust gets really hot I can only ride a few minutes before I have to turn it off and won't start until it's cooled off
sounds like it is running too lean - clean your carb and you might want to set your valves as well - all of it is easy. what does your plug look like? you might have a leaking exhaust donut as well - right where the exhaust bolts to the motor - if that is leaking it'll run hot
I miss him 1984 big red 200cc. Automatic old 3 wheeler 5 speed H. L. R. front rack and back rack ATV Or ATC. 25 years ago I loss him we can't find looking for old handa 3 wheelers big red 200cc somebody who throws ways my youngest brother he's mess up it's gone we can't fixing it some wrong the motor real bad news 2010. 250cc 4 wheelers 2x4. Automatic 2 rack starts it's not running everything power motor and light front and back 2 red brakes. Some one who's help me before who's fixing it all them every thing you want to buy one text message online Facebook my name is Bobby Joe Rozell. I'm handicap in my power wheelchair here I have Cerebral Palsy and disabled I'm 59 years old now and God bless all..
here is a youtuber who doesnt waffle on, gets to the point and keeps the video interesting. im impressed, new sub here. look forward to watching more
I see you edited out the part when you found out you were putting the tire back on wrong lol, that's the same tire changer I have makes a world of difference, great video as always, hope to see you in T.O. at the powersports show
A trick I learned for seating beads on my big 36" jeep tires was to take the chuck off the end of the air hose. Then take the valve core out. Push the chuck onto the valve stem, like you were trying to plug the air hose into the tire like it was an attachment.
You get a TON of air, way faster than through a valve with a valve core in it.
Also, if you bang the sidewalls with a good shop hammer, that will help the beads to seat and it jumps you a lot less! hehe They always jump me too when the beads seat.
It works pretty dang well. If not, I do the same - go to the ether and a lighter... but that's always the last resort.
With some slight modifications a rear fender off most lawn tractors will work in place of the OEM fenders. Just mount them to the rack instead of the frame.
Those aren't stock rears. Stock is 25x12-9 Ohtsu Pro/Am
You think we will see the other projects finished? The Elan restore, the Enticer mod etc,etc!!!
They’re in break able and the motors are amazing
manual tire changer is awsome i must get one of those!! it broke the bead like nothing great job
The other side of the red bar will feed the tire back on too
I enjoy watching your videos, they are informative and to the point. I recently was given a 1985 Big Red atc250es that I rode at my uncles when I was a kid. It needs some love. It already has a plastic tank and Ive come to terms with that, but I was wondering where the best sites are to find parts at a decent price. I looked at a fender yesterday that wasn't even painted and they wanted $395!!!! There has to be some aftermarket site that works good for these old beasts. What do you think?
You forgot to use up the rest of the old tires by doing awesome burnouts!
@powermodz you said the tires were real cheap. where are you getting them from? Thanx for your help....
Did you make a video of how you snorkelled it?
The 200x in the back tho 😍😍
What's the bike in the background? A 3 wheeler converted to 2 wheel motorcycle? Brings back 1980's memories.
Curious how to get axel out. I loosened 4 bolts on fork. Applied wd40 to threads on axle shaft. It's not budging with a 4ft snipe. Assuming it's a normal thread. How can I get it off without breaking something?
is there anything that is not held together with baling wire
Hi, after the last Bearing, and seal at Time 7:30 on the Video. Is There a Metal Washer that Covers the Black Seal? There is a Little Clip attached to the Outside that’s Bent over after Install. Was there a Metal Washer over the Seal? Thanks for any info or response. I appreciate the help. Great Video
Could you answer my question please? It might be obvious to you. I’m really concerned about getting an answer. Thanks again. I appreciate any info you could give
@@stevevc627 apparently he’s not as concerned as you,did you get the answer you were looking for?
Well done! That trike isnt going to know what to do with all that traction! You might be able to find an aftermarket exhaust, that would be cool.
I think dg makes them for those
So what do you do when the shaft in the front is froze and would not come out
hahah crazy i just did this to my 87 big red last nite. one thing i always do is pop out one of the seals on the bearing itself and add marine grade grease into it. it really does help
Anybody know what size tire valve stem size is used on the stock wheels? .453? .625?
take the valve out of the valve stem and more air will rush in the tire to help seat it
love you videos it would be see u do a 86 200x top end install
at 14:36....you hoped no one would notice? Just kidding. Great vid.
haha yeah ive done thousands of tire installs, the tires popping still get me every time lol.
I've never seen a Toy Store like this before;)
Have you ever thought of a Yamaha 250 I have and I have a es 200 Honda that we're working on
hey! great stuff! I'm curious what the front tire you went with was, having a hard time sourcing a front for my 200e. Got a 25X12x9 carlisle turf buster that's all cracked.
thanks!
lets not forget the claw hammer to remove the bearings
was just gunna say cmon man time for a ball peen in the shop.
Hey man.. sorry if I havent looked for it if you have one... Could you do a front fork rebuild?? Thanks! for the Big Red Vids!!
dose the front tire on a Honda 250sx come off the same way? thanks
should use the same bear claw up front as well
why????...lol
those balloon knobby tires are thin and puncture easy don't like them plus the bear claws are mean looking and fit nicely even on the front
Hey yall have any pointers for removing the front hub box bolts?
how do you change the rings in the rear
ive got a 1985 Honda 200 es atc I put a new cam in it and when I put it all back together I have no compression at all now what could be wrong. thanks for the help
Mark Hand the 200es was only made in 84
you still have these ol' girls?
Love ur vids man alot of useful info
On my big red the tire moves back and forth slightly when I put it back on and rubs am I missing a part or something any idea why it would be doing that ?
Bearings bud. Hope you figured that out already.
how do you ground it?
I need help how could I stick a 12 inch rim on my 200es big red?
I have them on mine, 12x7 with 2+5 offset
@@brendengoodwin7995 and it went on just like stock with no mods?
@@redskinman0 yessir
He put the tire on backwards. But I am still very jealous of all of his toys
that bike has 200es big red fenders on it. Not 250es
I can't get my big red 200 into neutral or reverse what should I do
fix it
You wanna sell those black 200s forks leaning on the wall?
Kuper Demo sure make an offer
Why not fix the brakes why your in there?
Do 1983 honda 200m have a nuetral saftey switch
hmm, im not sure about that...
Thank you so much
Awesome!!
Restore that beast not many around u should put your other channel link below
what other channel?
Good question am I missing a wonderful channel
please sir I need help my 84 200 m gets so hot after 3-4 minutes of driving I don't know what it is I would ask my dad but I don't have one in my life and my mom is barley around I worked so hard to buy this and an 85 with my own money and I found your youtube you are do smart with everything please help I have sll the tools as well just can't figure out what it is please give me some ideas
how do you mean it gets hot? does it seize? is it hot on your leg? if it is hot on your leg does it have the exhaust pipe shroud? is oil flowing? Maybe clean your oil filter.
PowerModz it's right by the engine where exhaust starts some oil looks like it comes out the top of the engine and exhaust gets really hot I can only ride a few minutes before I have to turn it off and won't start until it's cooled off
I'll right down your suggestions with oil filter it does have the black thing by my leg the shroud I didn't know what it was called
sounds like it is running too lean - clean your carb and you might want to set your valves as well - all of it is easy. what does your plug look like? you might have a leaking exhaust donut as well - right where the exhaust bolts to the motor - if that is leaking it'll run hot
PowerModz yea I seen oil coming out of there a bit
he ruined it when he put that snorkel on it
Why
Always buy tires made in the USA ! :D
He gonna burn them valves up with that scooter exhaust
You should get your son a atc 110
Anybody else notice he still put the tire on wrong 😂😂
Don't waste your time on the front brakes they'll never work for long just gear down buddy.
🤔👍
I miss him 1984 big red 200cc. Automatic old 3 wheeler 5 speed H. L. R. front rack and back rack ATV Or ATC. 25 years ago I loss him we can't find looking for old handa 3 wheelers big red 200cc somebody who throws ways my youngest brother he's mess up it's gone we can't fixing it some wrong the motor real bad news 2010. 250cc 4 wheelers 2x4. Automatic 2 rack starts it's not running everything power motor and light front and back 2 red brakes. Some one who's help me before who's fixing it all them every thing you want to buy one text message online Facebook my name is Bobby Joe Rozell. I'm handicap in my power wheelchair here I have Cerebral Palsy and disabled I'm 59 years old now and God bless all..
Power mods quick before the grammar nazis come you spelt install wrong D: (i hate grammar nazis)
whew!!! done, you are my official garrmarr checkar!
:D
Junkie