Hi since your comment is from about a year go it probably wont be of much help now but in case it is. when this message comes on it means there is a malfunction in the blind spot system. weather its an unmet pre requisite for the system to function, a software issue, or a hardware (physical) issue. I know the E class, ML, and CLS, have issues with water entry into the the two blind-spot radar modules especially in areas of colder climate. water or snow and dirt would get flung into the bumper eventually collecting in front of the sensors and preventing water from draining as intended. the radar sensors are water resistant not water proof so over time moisture builds up and corrodes the radars and pins or freezes inside the radar destroying it. it's pretty expensive to replace these modules as they are usually replaced in pairs for safe measure. the bumper needs to be removed, both blind-spot assist modules will be replaced, along with the harness and and initial startup will need to be performed with the diagnostic equipment some cars even have a modified bracket that they install when this happens to prevent this issue from happening again. i hope you find it helpful.
Best explanation. Great. Thanks!
The real question is what to do when system tells me blinde spot assist not functional . And I can’t reset it or shut down , what to do then ?
thank you so much
Thanks!!
Does this work on 2015 Mercedes-Benz Glk
Mine is not working saying blind spot assist disable any suggestions? Both side of light is on yellow color
you need to get OBD2 scanner to determine what are the reported error numbers!
Hi I have a 2012 c250 but boo d spot assist stays on red at all times even when no car is near me. Amy ideas on how to fix? Thanks
Pro tip: you can watch series on Flixzone. I've been using it for watching all kinds of movies these days.
@Donald Tomas yup, have been watching on flixzone} for months myself :)
your rear radars got water soaked due to leaky connectors. Need a new units and harness...
I bought a 15 e250 bluetec. I my dash display doesn’t show it. Can it be installed or programmed?
yes but it is prohibitively priced wizardry.
THANK YOU!
Can this be put on my 2010 ML350?And if so,what brand or kit is best for my Mercedes?
Hi What happened when the radar does not function? My stopped a while ago and doe snot beep neither gets red. Any idea what to do?
I have a 2012 c300 i dont think it has that but can i upgrate the mirrors with something with blind spot detection
nop, the two BlindSpot radar sensors are not colocated in the side mirrors but in the rear bumper sides.
what blind spot assist inoperative cls 550 2012
Gl 450 2013
Hi since your comment is from about a year go it probably wont be of much help now but in case it is. when this message comes on it means there is a malfunction in the blind spot system. weather its an unmet pre requisite for the system to function, a software issue, or a hardware (physical) issue.
I know the E class, ML, and CLS, have issues with water entry into the the two blind-spot radar modules especially in areas of colder climate.
water or snow and dirt would get flung into the bumper eventually collecting in front of the sensors and preventing water from draining as intended. the radar sensors are water resistant not water proof so over time moisture builds up and corrodes the radars and pins or freezes inside the radar destroying it.
it's pretty expensive to replace these modules as they are usually replaced in pairs for safe measure.
the bumper needs to be removed, both blind-spot assist modules will be replaced, along with the harness and and initial startup will need to be performed with the diagnostic equipment some cars even have a modified bracket that they install when this happens to prevent this issue from happening again.
i hope you find it helpful.
My car message saing blinde spot assist sensors deactivated
Same here brother what do we do to solve that!
Is this function available on E200 year 2015?
I have S class 450, reg 2019. It’s hasn’t or deactivated the mirror sensor. How can I deactivate it or install it as it’s highly important?