How To Change The Battery On A 2019 Hyundai Santa Fe
HTML-код
- Опубликовано: 12 сен 2024
- Never substitute a conventional flooded battery ( lead acid ) for a AGM battery ( Absorbent Glass Mat ). Also we test the Foxpeed G29 booster pack to see if it will keep the memory in this truck when we replaced the battery.
Here are some of the tools that jimthecarguy uses
www.amazon.com...
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.
Dang, go to learn where the battery is on my wife's car, even before I open the hood, and now I want to watch more of your videos!
You did a terrific job on this, I really appreciate the camera angles and the all of the information as you go along.
Thank you ❤
I'm right with you with the memory saver, things like the bcm tcm modules they do have a relearn but everything takes time and sometimes it doesn't go the way it should. Also even though my vehicle came factory with a lead acid battery I replaced it with an AGM battery. The benefits are many!! Great video jim. 👍 🇨🇦
Yes the old interstate battery don't know about them today.my dad had a interstate battery back in the 1970s that lasted 8 year.
Thanks for the video! I didn’t have the booster pack, but feel very lucky that my car didn’t completely reset: all seat memory positions, radio presets, etc were still in place. Whew!
Great vid!! Thanks for making this and pointing out the sequence of the terminals for removal and install.
That booster doesn't come with both of those cables, does it?
what about putting vaseline or lithium grease on terminals? what about putting those round cushions under the battery connector to prevent crusting at terminals?
Best video on the subject
Great video thumbs up. Thanks for sharing. Stay well & safe.
Excellent video. You should give lessons to new mechanics!
Thanks, will do!
Thank you so much. Very helpful
I was told by my dealer my battery current sensor is defective. My 2019 santa fe ultimate has push button start not key, but battery looks just like yours. Supposedly this snsor is part of negative bat cable? Are you familar with this part, #37180?
Thanks Jim! Got r dun!
any advantage to plugging a booster pack directly into the OBD port to save the battery instead of the accessory Port? I have a device with an OBD connector on one end and a plug to go into a booster pack on the other. Seems to me this is more reliable.
My 2019 Santa Fe has a push button start instead of using a key. So I'm wondering if I turn on accessory (one press of the button without foot on brake pedal) to retain memory will work in my car as I don't know if it will remain in accessory mode after the battery is removed.
so I have a 2018 Sante FE XL that has the original battery still. I was unable to start it last Christmas so I know it's time to replace the battery. I have an odd issue where if I use the driver side power window, I will randomly blow the 25amp fuse. Would you think that the old battery is causing this- or does this indicate a possible issue elsewhere? I have had to buy a dozen 25amp fuses to replace on the fly right now hahaha.
Thank you 👍👍 for sharing
Where can we get one of those cables with the power adapters on both ends like the one you used?
So…followed your instructions and used the same Foxpeed g29 into the same plug…useless. It auto turns itself off when you use the banana plug output port even though it was plugged into the car and the ignition key was in the accessory position - I checked half way through and to my surprise the Foxpeed was off. Turned it back on thinking it was too late but what the heck, and again it turned itself off after ~20-30secs. Funny thing is the car retained its memory.
I know the pack turned off for sure, as not only was its display off but the cable I got to connect it to the car has led lights on it that light up when power is flowing through it, and both times I checked the lights were off (they were on each time I turned the Foxpeed on).
Thank you!
You're welcome!
Are you sure that car requires AGM?. Mine is a SEL Plus and it has a regular one.
Good question but yes it does require it.
@@jimthecarguyThanks for your reply Jim.
@@jimthecarguyYes I don’t know how I missed it but the OEM battery reads AGM.
@@teaching-learning To be honest with you I also thought that it was a standard flooded battery. Only to see that on the battery it said AGM
@@jimthecarguy Thanks for your videos. These are very well structured and helpful. Have you seen the 2024 model? Full redesign... Thinking about upgrading. Check it out.
Can i use idle start stop agm battery? But mu sta fe 2019 is not a start stop
Yes you can .