I've got the same truck but true north midnight edition, 3 inch straight pipe, afm disabled and getting my rough country level kit put on in 2 days. I'm looking to get the same size tires. Glad to know they don't scrub.
Did this set up rub the upper control arm at full lock? I have the exact same tire and size but a more negative offset wheel that sticks out which I don’t like since it’s throwing rocks up onto the body so I was thinking of picking up the midnight edition wheels. I recall that on my stock wheels with my level I could see rub marks on the upper control arm. Any rub marks on these?
Nice truck..Is there any rubbing on full turn? I got 2” rough country leveling kit on my truck but not sure if 275/70/18r fits with out scrubbing and rubbing
Hello you didn't mention anything about wheel spacers I noticed the rough country website says to use a .25 spacer with their leveling kit to use the factory OEM wheels. I ordered the 2 inch level hoping I dont need spacers either, I also have a 2017 Silverado
Copy and paste this into google: MBRP 3-Inch XP Series Single Exhaust System with Polished Tip; Side Exit I don't own the truck anymore. I bought a new 2021 F150 FX4.
nice truck brotha i got the same exact truck 2016 bone stock question what is the stock leveling kit on the car? for some reason i cant find this info anywhere \
Nice👍. I went with the 2" RC kit. It will be good for the time being. Later on Ill go with the 3.5 or 4" kit from them. I also ordered the dual mbrp kit. Hows you truck been treating you?
It’s been great so far. The reason I went 2 inch level is because I didn’t want to do a Diff drop or purchase UCAs. It rides better than OEM now. The General Grabbers are a TON quieter and smoother than the stock wranglers. I’m just glad I didn’t have to trim anything. Love the truck! Hope yours is running smooth too!
@@spartands7735 thats great, ya I wasn't about to cut up the new truck. I was going between the 4in kit and the mbrp. But don't have the $$ for rim's and tires yet, and didn't want to have skinny leg syndrome lol enjoyomg3the truck otherwize.
They will 100% rub with spacers. I am against spacers as I have 1st hand experience with them on a different truck. If you go that route, plan on doing some serious trimming and plan ahead for rust.
How you like these tires? I literally just ordered them and I’m nervously looking to see if they’re gonna rub on a 2014 Silverado. Same size and I have the 2 inch leveling kit😂
I love these tires. They are silent on the road and the ride is smoother than stock. I will be putting these tires on every truck I have going forward.
Andrew DeCicco Type in Yotamotor on amazon and you’ll find it. Don’t be dumb and waste your money on a name brand more expensive kit. At the end of the day all it is is a block.
Very sharp truck.
I've got the same truck but true north midnight edition, 3 inch straight pipe, afm disabled and getting my rough country level kit put on in 2 days. I'm looking to get the same size tires. Glad to know they don't scrub.
You’ll be happy with that setup
Beautiful Truck.
Did this set up rub the upper control arm at full lock? I have the exact same tire and size but a more negative offset wheel that sticks out which I don’t like since it’s throwing rocks up onto the body so I was thinking of picking up the midnight edition wheels. I recall that on my stock wheels with my level I could see rub marks on the upper control arm. Any rub marks on these?
So sick!!!
Got same truck same setup all black looks amazing . Upgrading my tires from 275-65-18 to this and was wondering if it would rub thanks 👍👍👍
My setup doesn’t rub.
Nice truck..Is there any rubbing on full turn? I got 2” rough country leveling kit on my truck but not sure if 275/70/18r fits with out scrubbing and rubbing
Zero rubbing. I’ve put roughly 10k miles on it with this setup and it has never once rubbed.
Hello you didn't mention anything about wheel spacers I noticed the rough country website says to use a .25 spacer with their leveling kit to use the factory OEM wheels.
I ordered the 2 inch level hoping I dont need spacers either, I also have a 2017 Silverado
I didn’t use wheel spacers
We need more videos on your truck!!!!
Lol what do you want to see? I’m not exactly the vlog type
Maybe an update on the leveling kit? Review on owing the truck ? Any new mods...
@@Tiretrack CAI is the only new mod. Still drives exactly as it should. Still the best tires on the market IMO
What brand of leveling kit did you get ?
@@Tiretrack 2" Leveling Kit for Chevrolet Silverado 1500/GMC Sierra 1500 2007-2018 www.amazon.com/dp/B077GMHG2M/ref=cm_sw_r_cp_api_fabc_y6VXFbZKWVRGN
Which Mbrp exhaust is that? You should make an exhaust vid, sounds Goodman. Looks good too
Copy and paste this into google:
MBRP 3-Inch XP Series Single Exhaust System with Polished Tip; Side Exit
I don't own the truck anymore. I bought a new 2021 F150 FX4.
Can we hear the truck
Truck looks nice! Did you recalibrate your speedometer after putting on the bigger tires?
CHEVYDADDY518 no sir. It’s only about 1 mph off so I don’t worry about it.
@@spartands7735 Doesn't it also throw off your MPG count?
CHEVYDADDY518 yes by about 1 mpg
@@spartands7735 Gotcha, thanks! 👍
Which exhaust did you get?
nice truck brotha i got the same exact truck 2016 bone stock question what is the stock leveling kit on the car? for some reason i cant find this info anywhere \
What do you mean by "Stock" leveling kit? There is no such thing as a "Stock" leveling kit.
Nice👍. I went with the 2" RC kit. It will be good for the time being. Later on Ill go with the 3.5 or 4" kit from them. I also ordered the dual mbrp kit. Hows you truck been treating you?
It’s been great so far. The reason I went 2 inch level is because I didn’t want to do a Diff drop or purchase UCAs. It rides better than OEM now.
The General Grabbers are a TON quieter and smoother than the stock wranglers. I’m just glad I didn’t have to trim anything.
Love the truck! Hope yours is running smooth too!
@@spartands7735 thats great, ya I wasn't about to cut up the new truck. I was going between the 4in kit and the mbrp. But don't have the $$ for rim's and tires yet, and didn't want to have skinny leg syndrome lol enjoyomg3the truck otherwize.
I have the same truck and want to keep the same rims but want to have some poke would you recommend spacers or would they rub?
They will 100% rub with spacers. I am against spacers as I have 1st hand experience with them on a different truck. If you go that route, plan on doing some serious trimming and plan ahead for rust.
@@spartands7735 thanks for the advice man
How you like these tires? I literally just ordered them and I’m nervously looking to see if they’re gonna rub on a 2014 Silverado. Same size and I have the 2 inch leveling kit😂
Do you seriously not rub whatsoever? Reverse? Full lock? Full lock in reverse?
I love these tires. They are silent on the road and the ride is smoother than stock. I will be putting these tires on every truck I have going forward.
Zero run whatsoever. No trimming. No modifications. Trust me I was worried about it too
Chad Halpin yes! I had them on my 2009 but only got to enjoy them for a month or so
Have you gotten to run them in snow yet?
Do these rub on the upper control arms?
Not at all. Put 50k miles on this setup and it never once rubbed on anything.
Does it fit in your garage?
Yes sir. And as you can see, I have a normal sized two car garage.
@@spartands7735 Nice.. Appreciate it. Thanks for the reply!
What brand 2” just bought the 18 midnight
Andrew DeCicco Type in Yotamotor on amazon and you’ll find it. Don’t be dumb and waste your money on a name brand more expensive kit. At the end of the day all it is is a block.
Chad Halpin it’s just the block in the fount right
Andrew DeCicco yes
whats the rim dimensions and offset?
Stock. Which if I had to guess, they would be zero offset.
What that cost you
Leveling kit - $20
General Grabbers/Mount/Alignment - $1200
MBRP Exhaust - $400
Tint - $200
Total - $1820