it seems like it's really struggling to get up onto a plane. Does the hull have steps? if not adding some might help. also, the motor rpm sounds really high witch to me indicates the need for a more aggressive or possibly larger propellor. this might give the boat the extra top-end speed to get up planning. just a thought! the boat looks really neat!
Man I’m trying to fabricate sponsons but I need them about 54’ long and 16” tall, the angles to get the gaps closed are kicking my butt. Going grip a ton of cardboard and razor knife blades. This is the best video I’ve found after about 30 hours of researching sponson designs. I’m making a mold from heavy cardboard taping off all lines where joins and pouring flotation foam into it to make shape of sponson then 3 layers of glass 2 layers gel coat to make a catamaran style little shallow water boat with a trolling motor 86lb thrust. But may hv to go to simpler pattern but damn sure like this one thanks
Great looking boat - struggling a bit to get up on the plane, ploughing a bit through the water. Almost certainly too heavy, if you remove some stuff it will get up on plane and your speed will double. Remove the water pump (the water pickups are self pressurising), all the aluminium parts on the transom except the rudder, move a single turn fin to the back of the right sponsor, remove all the cosmetic stuff on top (air intakes etc) and thrn get rid of as much of the stuff as you can inside the boat. Finally move your batteries is far forward as possible, you want the cog at about the level of the back of thr sponsors. That way you won't need to add weight to the front to stop it from flipping. Your build looks awesome, a few minor changes and it will fly!!!
в боковых спонсонах или поплавках используйте вместо шпангоутов просто плотный пенопласт и его уже обклеивайте листами фанеры, дерева, картона, стеклоткани как угодно. намного легче прочность достаточная даже для гонки и плюс при аварии непотопляемость
Süper gerçekten elinize sağlık sadece ağırlık merkezinin daha önde olması gerekiyor sanırım, tam güçte ya da rüzgar dalga vs gibi dış etkenlerde önden aldığı hava akımıyla takla atabilir gibi,üst hava oluğu da gövde üzerine enlemesine yayvanlaştırılırsa aerodinamik olarak daha da harika olur acizane düşüncem
Amazing work. The boat looks awesome. It appears tho your water cooling wasnt working. When the camera was facing the rear there was not any water streams shooting out of either side of the boat.
Excellent build now make a nice ramp about ten inches wide and three feet long a ramp to when finished power up enough to have your boat run up on it for a finale. Just a cool touch to a days fun .
Hey bro that was an amazing build a few things that I noticed that you can fix to improve the speed one is where your strut holder is located there is a gap which allows water to flow into your stuff into which will cause friction and will make you lose momentum that's why the boat sounds really loud but it is not going very fast also if you take out the big water pump and go with something a little smaller that's going to reduce the weight which would increase your miles per hour
Very Cool my friend;I luv'd going thru the steps from "Start to Finish" with U. Thanku for Sharing Your Craftsmanship;It's inspiring! Best of luck on Future Projects Bruh! ✌
Выглядит лучше, чем плавает. Очень тяжёлый. Винт подобран неправильно. Возможно и глубина его погружения тоже неправильная. Вот, как надо делать. 4S: ruclips.net/video/WfcAJrAXjk0/видео.html 3S: ruclips.net/video/38Xbsve2c58/видео.html
Interessante la costruzione. Ma come mai usi la colla a caldo e non usi la colla dedicata al ciano acrilico? Avrei bisogno di consigli per il montaggio di un kit di motoscafo. NON ci sono istruzioni dettagliate. Grazie mille.
May I know sir do you also sell those items that you make like a boat and if you sell it how much do you think? Thank you I’m your subscriber and I’m really amaze how you assemble it from start to finish, again thank you
избыточная прочность и слишком усиленная конструкция. даже спортивные лодки и те проще устроены. а учитывая что эта модель катается сама то нет смысла её делать очень прочной. это всё сказалось на весе модели. модель способна на большее но для этого теперь надо очень мощный двигатель. ну а так в целом не плохо. из подручных материалов получилось симпатичная модель.
Nice boat but way too much stuff added. Don't really need a water pump as the rudder pick ups are designed to supply the cooling water. Run one pick up for the motor and the other for the ESC. Also don't need that many turn fins, multiple turn fins are usually needed on mono hulls and V bottom boats. Probably reduce the weight around a pound without all the unnecessary stuff and increase the overall speed. I'm not hammering your build just giving you some helpful advice. I run nitro hydroplanes and every ounce of weight you can remove makes a difference. To keep the bow down and keep the boat from flipping you need to adjust the angle and height of the thrust line of the prop.
I see that you cut your wood in a single move, Me I have to cut my balsa wood with my cutter at least 5 times, do you have a specific tool ? do you apply lot of strenght ? what is the thickness of your wood ? I am dealing with 3mm
Hi, nice boat. Have you tested how fast it can go? And how sturdy is the boat with the design and materials used? Also, what are the dimensions of the boat when it is finished?
great rc catamaran boat
Thank you
Woww, keren sekali aah video nya
terima kasih atas komentar yang bagus
Fast and furious!
Bir saniyesini bile sarmadan izletti, inanılmaz emek var, bilgi var, sonuç muhteşem, ellerinize sağlık, bir sonraki videoyu iple çekiyorum..
Çok teşekkürler
Siz daha iyisini yapana kadar en iyisi bu 👊🏼👊🏼👊🏼 ⚡️ ⚡️ ⚡️
teşekkürler
Bu kadar yetenekli insanları değerlendirmek lazım
Sehr schöne Arbeit, sowas nenne ich Modellbau .
Danke für deinen netten Kommentar
Alet işler el övünür sözünü lügatımdan sildim bu çalışmadan sonra eline emeğine sağlık büyük beceri 👌👍
teşekkürler
Erhan baba yaptın gene yapacağını süper olmuş emeğine sağlık 🧿👍🏼
Teşekkür ederim
Paylaşımlarınızı merakla bekliyorum ve videoları heyecanla izliyorum. Videoların devamını bekliyoruuuzzzz 🌸 🌸 🌸
İzlemesi bile çok keyifli 👍
мечта сделать подобное!! молодец!!!
спасибо за ваш хороший комментарий
Push 35lbs+ and still goes? Good Job!!!
One of the best
Thank you
Çok eğlenceli görünüyor,eline sağlık
Teşekkürler
Che velocità hai ottenuto? Grande lavoro. Bravo
Non ho usato un tachimetro. Grazie per il commento
The besty i have ever seen 🔥
Thank You
Wow very nice bro
Thank you bro ❤️
ellerine sağlık çok güzel olmuş
başarı bir iş çıkarmışsın müthişş
Güzel yorumunuz için teşekkür ederim.
That is one sweet boat
Thanks for your nice comment. Your channel is so good I subscribed
@@CraftChannelYT Thank you buddy.. RC pal..I like yours also
it seems like it's really struggling to get up onto a plane. Does the hull have steps? if not adding some might help. also, the motor rpm sounds really high
witch to me indicates the need for a more aggressive or possibly larger propellor. this might give the boat the extra top-end speed to get up planning. just a thought! the boat looks really neat!
Süper ötesi birşey elinize sağlık çok güzel bir proje olmuş....
teşekkürler
Emeğinize sağlık süper olmuç, rc araba kumandası kullansanız daha hoş olurmuş sanki ama yinede proje süper.
Wow.
Thanks
sehr gut ! ich würde die kamera steuerbar machen !
Muhteşem bir yetenek
Amazing work, buddy! Fantastic boat!!! 👍
Thank you bro
Класс.👍👍👍👍👍
Güzel bir çalışma olmuş emeğinize sağlık başarıların devamını dilerim 🙏
Tebrik etmek lazım çok özverili ve kaliteli bir çalışma olmuş
teşekkürler
Man I’m trying to fabricate sponsons but I need them about 54’ long and 16” tall, the angles to get the gaps closed are kicking my butt. Going grip a ton of cardboard and razor knife blades. This is the best video I’ve found after about 30 hours of researching sponson designs. I’m making a mold from heavy cardboard taping off all lines where joins and pouring flotation foam into it to make shape of sponson then 3 layers of glass 2 layers gel coat to make a catamaran style little shallow water boat with a trolling motor 86lb thrust. But may hv to go to simpler pattern but damn sure like this one thanks
Super making, super video, super infos!
thank you
Siz daha iyisini yapana kadar en iyisi bu 👊🏼👊🏼👊🏼 ⚡️⚡️⚡️
Muhteşem 👐👍👍
Elinize emeğinize sağlık bu kadar güzelini ve mükemmelini görmemıstım Bir an önce sizinle irtibata geçmeyi düşünüyorum 👏👏👏
teşekkürler
Bundan sonraki her proje son şampiyon 👍🔥🔥🔥🔥🔥🔥
Emeğinize sağlık muhteşem olmuş
teşekkürler
Ma c’è un progetto per dimensioni e parti? Comunque progetto magnifico, non ho mai visto niente di così bello
Very nice
Thank you bro
İyi iş abi bir sonraki projeni sabırsızlıkla bekliyoruz.emeğine sağlık
muhteşem tebrikler 👏🏻👏🏻👏🏻
Great looking boat - struggling a bit to get up on the plane, ploughing a bit through the water. Almost certainly too heavy, if you remove some stuff it will get up on plane and your speed will double. Remove the water pump (the water pickups are self pressurising), all the aluminium parts on the transom except the rudder, move a single turn fin to the back of the right sponsor, remove all the cosmetic stuff on top (air intakes etc) and thrn get rid of as much of the stuff as you can inside the boat. Finally move your batteries is far forward as possible, you want the cog at about the level of the back of thr sponsors. That way you won't need to add weight to the front to stop it from flipping. Your build looks awesome, a few minor changes and it will fly!!!
Just saw your newer videos!, come a long way!
в боковых спонсонах или поплавках используйте вместо шпангоутов просто плотный пенопласт и его уже обклеивайте листами фанеры, дерева, картона, стеклоткани как угодно. намного легче прочность достаточная даже для гонки и плюс при аварии непотопляемость
경험상 프라스틱 스쿠류는 부하를 많이 받으면 펴지는 경향이 있습니다. 쇠로된거로 추천 드립니다
Süper gerçekten elinize sağlık sadece ağırlık merkezinin daha önde olması gerekiyor sanırım, tam güçte ya da rüzgar dalga vs gibi dış etkenlerde önden aldığı hava akımıyla takla atabilir gibi,üst hava oluğu da gövde üzerine enlemesine yayvanlaştırılırsa aerodinamik olarak daha da harika olur acizane düşüncem
Güzel yorumunuz için teşekkürler
Tek kelimeyle HA Rİ KA.Emeğinize sağlık
Wonderful boat bro👍✌️🔥
teknenin hızı harika
↪️TECHNO INNOVATORS
Thank you bro ❤️
sıvı sogutmalı birde ellerine sağlık harika olmuş dostum :)
Güzel yorumun için teşekkürler
Tek kelime ile muhteşem, tebrikler👍👍👍
teşekkürler
Arkaya kafa şişiren müzikler koymasan daha iyi olur, atölyenin seslerini tercih ederim.
veramente stupendo
Grazie
Waoww
teşekkürler
Cok iyi ne bicim gidiyor jet gibi
Milyonlarca izlenme alması gereken bir video 👏🏻👏🏻
Teşekkür ederim dostum
Sadece biraz yavaş. Onun dışında gayet iyi. Ben de bu tarz videolar yapıyorum. Başarılar.
What's the very first song in this video? Both songs listed are not it. Kool boat, very talented! 👍
Amazing work. The boat looks awesome. It appears tho your water cooling wasnt working. When the camera was facing the rear there was not any water streams shooting out of either side of the boat.
Excellent build now make a nice ramp about ten inches wide and three feet long a ramp to when finished power up enough to have your boat run up on it for a finale. Just a cool touch to a days fun .
Thanks for your nice comment
Beautiful build, the only thing I would have done differently would have been to lacquer the body and given it a mirror finish but well done 👍👍👍
Thanks for the nice comment
Stupendo 👍
Grazie
👍👍👍👍👍👍👍👍
Hey bro that was an amazing build a few things that I noticed that you can fix to improve the speed one is where your strut holder is located there is a gap which allows water to flow into your stuff into which will cause friction and will make you lose momentum that's why the boat sounds really loud but it is not going very fast also if you take out the big water pump and go with something a little smaller that's going to reduce the weight which would increase your miles per hour
Very Cool my friend;I luv'd going thru the steps from "Start to Finish" with U. Thanku for Sharing Your Craftsmanship;It's inspiring! Best of luck on Future Projects Bruh! ✌
Hello do you use a 'wood hardener' ? And could you explain the process you follow to waterproof your boat ?
I use waterproof epoxy
Hallo where do find the mall´s
Have you made yourself those thank you
Good video
I think its better the 2 engine sir😊
You are right :)
Hi bro!! Loved the video! Is it possible for you to share the plans with me and can i scale it down to around 50cm length?
helloo..before putty..u apply fiber resin?
Um trabalho muito caprichoso.
Me gustaría comprar una como esa para el mar, vivo en la florida USA
waar koop je je activator spray? ik heb altijd van die kleine busjes
Выглядит лучше, чем плавает. Очень тяжёлый. Винт подобран неправильно. Возможно и глубина его погружения тоже неправильная.
Вот, как надо делать. 4S: ruclips.net/video/WfcAJrAXjk0/видео.html
3S: ruclips.net/video/38Xbsve2c58/видео.html
załóż większą śrubę napędową np.52mm 3łopaty...mam ten sam silnik i uwierz mi,że robi ta śruba dobrą robotę,przez co łódź płynie szybciej
those fish were like?
Yo! did you see that “ufo”
bro it was an unidentified floating object up there!
Did you see it?
So cool! Could you give us the plans?
Hello, unfortunately this boat has no plans. I built it impromptu while shooting video.
you should top speep
Thank You
How do you figure to cut the strips for the sponsons so accurately?
Interessante la costruzione. Ma come mai usi la colla a caldo e non usi la colla dedicata al ciano acrilico? Avrei bisogno di consigli per il montaggio di un kit di motoscafo. NON ci sono istruzioni dettagliate. Grazie mille.
Hallo what fir kind of wood do you use thank you
Which glue did you use to join the wood?
waterprof epoxy
May I know sir do you also sell those items that you make like a boat and if you sell it how much do you think? Thank you I’m your subscriber and I’m really amaze how you assemble it from start to finish, again thank you
избыточная прочность и слишком усиленная конструкция. даже спортивные лодки и те проще устроены. а учитывая что эта модель катается сама то нет смысла её делать очень прочной. это всё сказалось на весе модели. модель способна на большее но для этого теперь надо очень мощный двигатель. ну а так в целом не плохо. из подручных материалов получилось симпатичная модель.
🖒🖒🖒🖒🖒🖒👏👏👏👏👏👏
Nice boat but way too much stuff added. Don't really need a water pump as the rudder pick ups are designed to supply the cooling water. Run one pick up for the motor and the other for the ESC. Also don't need that many turn fins, multiple turn fins are usually needed on mono hulls and V bottom boats. Probably reduce the weight around a pound without all the unnecessary stuff and increase the overall speed. I'm not hammering your build just giving you some helpful advice. I run nitro hydroplanes and every ounce of weight you can remove makes a difference. To keep the bow down and keep the boat from flipping you need to adjust the angle and height of the thrust line of the prop.
Thank you for the useful information. I will try using this information on next boats
Catamaran show
Can you please build 60inch catamaran boat with 2 x4092 motor aand 2x120a ESC and 2x6s = 12s and with metall propeller please
I will wait 🙏🙏
next video 120A 2 esc with 2 motors and 36 "rc boat with metal propellers please stay tuned
@@CraftChannelYT hey 36inch will be smaller I think can you make a big boat like 50inch
@@CraftChannelYT oh that sounds great, I can't wait
Nice work...how much money cost all the parts?
thank you. I have given the information and purchase links of all the parts in the description line.
İzmir'de neredesin usta?
Göztepedeyim
Que material utiliza para el barco
árbol de balsa
I see that you cut your wood in a single move, Me I have to cut my balsa wood with my cutter at least 5 times, do you have a specific tool ? do you apply lot of strenght ? what is the thickness of your wood ? I am dealing with 3mm
I cut it in 4-5 moves. I crop it in the assembly part so that the video does not stretch
@@CraftChannelYT ah ah!
@@CraftChannelYT and which thickness? For the wood do you use?
Can you tell me what kind of wood you use
balsa and pine
Boy does that need a better prop!
my work continues
What wood you use and how thick is the wood Asome work
How about a water jet thruster sir?😊
12s넣고 기어가네.....그냥 완구를사는게 좋겠네
plaz agein boat foms bot
Is there a plans that we can order
Is there a plans that we can order
what is the thickness of wood used ???
How much $$ to make me one? Great work by the way bro
Thank you for your nice comment. I do it for hobby purposes. Not for sale unfortunately
tem planta disponível para baixar
Hi, nice boat. Have you tested how fast it can go? And how sturdy is the boat with the design and materials used? Also, what are the dimensions of the boat when it is finished?
Aijsjsks