Trouble shooting bottom loading water dispenser...
HTML-код
- Опубликовано: 17 сен 2020
- Hot and cold cooler dispenser repair.
How to fix your bottom load water dispenser.
Trouble shooting bottom load hot and cold water cooler. Learn how to fix your bottom load water cooler.
![Kehlani - Next 2 U [Official Music Video]](http://i.ytimg.com/vi/MpI7ekFG8A0/mqdefault.jpg)
![Darren Waller - Who Knew (Her Perspective) [Official Video]](http://i.ytimg.com/vi/GytDjB8u6bM/mqdefault.jpg)
Thank you so much for sharing this! I was about to throw away my water dispenser 😂
Me too
If anyone is having the issue where both hot and cold do not dispense, I discovered that after awhile, ice builds up in the cooling reservoir and clogs the holes the water passes through. I had to switch the cold water off and leave it until the ice melts and holes open back up. This fixed the problem and hopefully it's a solution for anyone else having this issue as well.
Hello Chris, Good move on your behalf. You could also unplug unit and pop the drain cap behind unit for faster results.
Hii, could you please guide me where the drain cap is behind unit as my cold water tap isn’t functioning at all, hot water is flowing from the cold water tap; I have unplugged the dispenser and also followed your guide from the video but it isn’t helping
@@warda8280it's a red cap behind the dispenser, right handside. There's a plastic covering that you need to unscrew
Dahm I hope this work all 3 water dispense ain't working
Thanks, I didn't realize there was a reset button. That literally fixed my issue when nothing else would
Glad to be of service, Best.
Holy cow! Thank you so much for this video!! I can only have water to drink, and my tower kept showing that it was empty even though I had a full 5 gal in it. I followed what you did and found that was what my problem was! The top piece of the hose had come out just enough that it couldn't pump the water. Thank you so much!!
Hello Rebecca, We're happy to hear this video clip helped you resolve your problem. hope to be of further service in the future. best regards. *Please subscribe to our channel* New content awaits.
Mine is a bit different, tubes don't come out but pushing them A bit and yanking them out worked perfectly !! Thank you
*Welcome*
Omg, just the video I was looking for! My dispenser kept blinking red even with a full gallon. I spent an hour trying to Google what the issue is and troubleshooting it myself. Thank you! Easy fix:D
Hello, Glad to have helped. Stay tuned for more content.
Thank you 👍. Worked with me I was about to change the pump
Thank you very much, I really thought my unit is broken glad to see your video💪
Glad We were of assistance.
This fixed our cooler! Thank you!
**welcome, stay tuneed and subscribe new content up next.
It helps me alot tank u
Thank you so much! Your video helped me fix the issue 😃
Glad to help Maryam.
Great advice
This helped me. Thanks!
Thank you so much my dispenser wasnt working and we couldn’t work also now its solved yay 🎉🎉
Thank you for your help, God love you
Thank you!
THANK YOU SO MUCH ❤
Unfortunately I did everything I learned from you guys. I did not work. It is used only couple of months and now it stoped . Of course I did not use it for some years.
Thanks it was helpful for me
Thanks very helpful🎉🎉🎉
Thank you sir ❤
If my brio just liking from dispenser drop after drop, maybe u got any solution?
I didn't even know we could pull the tube out. A few weeks ago the cooler stopped loading water into the tanks automatically. It starts working eventually, but sometimes it takes a lot of time/
fiddling. I don't know if there's a short or just air in the tubing.
No short. Leave your door open then hit the reset button to trouble shoot your pump. If the pump sucks water then pump is ok. Also check all your tubbing ends to air leaks.
What should I do about a pump that won't turn off? My bottle is empty and I have to open the door to get it to stop.
My straw wasnt air tight sealed blue band was broken we tughtened it and works now
Glad you're back and running again, Best.
Thank you soooooo muchh
*Welcome. Glad to be of service.
My water is coming out with white flakes. I cleaned the Avalon water dispenser with the manufacturers cleaning kit and it’s still the same. I don’t know what to do now 😩
Bro my dispenser not cooling what seems to be the problem? I tried adjusting the temp but it not works
Water not pumped up. How can i do?
Bro my cooler feeds fine if I take the probe out of water bottom, let the pump run and quickly insert it back in but it doesn't work otherwise... any ideas what could be the issue? Is there a sensor or this probe thing is gone bad?
Hello,
Try opening the bottom door and hitting the reset switch usually on the top right corner. If you hear the water being pumped you're good to go, If you don't your pump is no good.
I had that same problem the water didn't want to pick up..I just blew into the line that's going into the dispenser..now it works again
yow i think mine broke even more when i blew into it
My tubes doesn’t seem to come out I don’t want to pull it too hard and maybe i get another problem
tried everything..swapped pump..nothing..will not pump
Help mine is still blinking replaced the filter and everything
Hold the reset button for 3 seconds while the door is open. It's usually inside the bottom compartment door. top left, White pin. That should immediately circulate and fill your reservoirs. if it stops you're good to go.
I still have the same issue. Nothing happens when I close the door. I have done all the troubleshooting tips from this video, unplugged, plugged back in. I don't know what to do :(
Help pls
I have the same problem
Perhaps your pump is out or you might have a broken fitting. post pictures if you'd like us to see. Best.
Mine is leaking at the reset part? Pls help
Reset button leak is not common, Send picture for further review, Best.
Mine stopped working the cold water doesn’t disperse water nothing comes out only hot works
Mine too.
Unfortunately this didn’t help 😭 I think my little water pump is smoked
the pump i got was like 25 bucks on amazon..easy swap..still didnt work..i think the board that controls everything is fried..still kicks on to cool the water but zero pumping
@@nunyabidness7547 I did the same thing..I tested the voltage coming off the board and it was like 1-2 V. I figured my board was fried too
My water is coming out with white flakes. I cleaned the Avalon water dispenser with the manufacturers cleaning kit and it’s still the same. I don’t know what to do now 😩
My water is coming out with white flakes. I cleaned the Avalon water dispenser with the manufacturers cleaning kit and it’s still the same. I don’t know what to do now 😩