HP tg01-0023w Gaming Ryzen , Fixing Ram Upgrade + Basic Overclock
HTML-код
- Опубликовано: 22 авг 2024
- Something like my computer but More Hard drive space but slower Graphics card. the slower 1650. But More Storage.
TG01-0030, Black
amzn.to/3dFjwNM
Lower price TG01-0040, HP Pavilion Gaming Desktop Computer, AMD Ryzen 5 3500 Processor, AMD Radeon Rx 5500 4 GB, 8 GB RAM, 512 GB SSD
amzn.to/3EK18Q1
This page contains affiliate links. If you purchase a product through one of them, I will receive a commission (at no additional cost to you). I only ever endorse products that I have personally used and benefitted from personally. Thank you for your support!
The ram I'm using.
Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz. amzn.to/37H6I8M
Here is the Walmart one. Which is the same one.
www.walmart.co...
-
Computer Setup I have.
Tech I'm using right now: kit.co/RichYoY...
-
Here is a slower Cpu one but a faster Gpu one.
amzn.to/3qloTHZ
HP Pavilion Gaming PC Desktop Computer, Intel Core i5-9400F, NVIDIA GeForce GTX 1660Ti, 8GB RAM, 256GB SSD, Windows 10 (690-0073w, Black)
A few times and a few people have gotten stuck on boot.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
------------
AMD Ryzen 5 3500 Processor, NVIDIA GeForce GTX 1650 Super 4 GB, 8 GB RAM, 256GB SSD
Operating system: Windows 10 Home
Processor: AMD Ryzen™ 5 3500 Processor
Memory: 8 GB DDR4-2666 SDRAM memory (1 x 8 GB)
Internal Storage: 256 GB PCIe® NVMe™ M.2 Solid State Drive
Graphics: NVIDIA® GeForce® GTX 1650 SUPER™ graphics card with 4 GB GDDR6 dedicated memory
Mouse and keyboard: USB Black Wired keyboard and mouse combo
USB ports: 9 (4 SuperSpeed USB Type-A 5Gbps signaling rate, 4 USB 2.0 Type-A, 1 SuperSpeed USB Type-C® 5Gbps signaling rate)
Wireless: Realtek Wi-Fi 5 (1x1) and Bluetooth® 4.2 Combo, MU-MIMO supported
----
This page contains affiliate links. If you purchase a product through one of them, I will receive a commission (at no additional cost to you). Thank you for your support!
►Nexo, free cryptocurrency, when you sign up. and Deposit $100.00, & great place to get 5%+ interest On USD or Crypto. I recommend this. Which I use right now.
nexo.io/ref/t7...
► Coinbase. When you sign up get $10.
www.coinbase.c...
► Try Amazon Prime 30-Day Free Trial, *Thousands of movies & TV: amzn.to/2rQv2T6
► Audible Free Trial: amzn.to/2QIKfy2
►Pay bills by Credit Card @payplastiq. Use referral code & pay $500 worth of bills to get 500 fee-free dollars:apps.plastiq.c...
►Capital One Free $25 with deposit: capital.one/2C...
►Airbnb, Rent a place to stay like hotels, or Tree House. Sign up, you will get up to $55 off your first trip: abnb.me/e/LLeB...
►Lyft: $5 in ride credit, download the Lyft app using my referral link:www.lyft.com/i....
►American Express Gold Delta Skymiles Credit Card, 60,000 Bonus Miles and a $50: refer.amex.us/L...
►Chase Banking $200 bonus or $150 bonus: accounts.chase...
---
Here are more info about the computer with CpuZ. ruclips.net/video/j8yydggBjNU/видео.html
Upgrading Ram and Fixing Speeds. ruclips.net/video/HfGd1rfgZqY/видео.html
Opening up the Hp Gaming PC. ruclips.net/video/SNvpLI-23Uo/видео.html
what parts can you upgrade. ruclips.net/video/cq3RvtvaXkE/видео.html
A few times and a few people have gotten stuck on boot.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
Bro thank you so much for making a detailed video on this I'm a noob and this is extremely helpful
Can you please help me on discord I cant figure my pc out. I have 3000mhz ram but how do I put it in the settings it must go on?
@@Bryan-uk9kh I dont have discord. you will have to change the memory clock and fabric clock to 1500, half the speed of 3000 mhz.
@@richyoyo9796 Hi bro, I have the same pc, could you explain to me how to remove and install the new ram strips?
I hope more people see this video, I feel like it could help so many more people, even ones who aren't in the exact same situation.
I installed 2x16 corsair vengence 3200,tried his settings,didn't work.Then I simply set boost to prescion,set mhz on ram to 1600,coupled fabric clock.Hit apply and test and presto! 3200mhz.
Thanks man, you're a life saver.
This worked . Thank You!
Thank you so much. I followed this video and my computer wouldn't boot, I had to reset my cmos. Your method worked perfectly for me. My ram is now running at full speed.
@@scarsfromknives what do you click on for boost to prescion I'm confused on that part
@@bestceesa4122 I used Ryzen Master version 2.6.2.1818. On the left side of the app, I chose "Profile 2". Up on top, I chose the tab "Precision Boost Overdrive". Under the area labeled "Memory Control", I clicked the box that said "Excluded" and changed it to "Included". "Memory Clock" and "Fabric Clock" defaulted to "1600" so I didn't have to change anything there. "Coupled Mode" defaulted to "ON" as well, so no changes there either for me. After that, I clicked "Apply and Test". My computer rebooted, Ryzen Master auto-launched and ran a test. Once the test completed, Ryzen Master said all was good. I checked my RAM speed and it was running at 3200. I hope you get yours up to speed too!
Just reposting in case no one read the comment thread:
This worked for me. [Note: this is for the same ram kit - 16GB kit Corsair DDR4 3200 mhz]
1. Precision OC, no other changes, boots ok.
2. Precision OC, fabric/memory coupled at 1600, boots ok. (3200 Mhz in task manager)
3. Precision OC, fabric/memory coupled at 1333, timings(16/18/18/auto/54/36/rest auto), boots ok (2667 Mhz in task manager)
I tried 1600 with the proper timings and it will not boot, cmos reset fixed each time. Hope this helps.
What do you do if it wont boot like how do you change the settings back
@@wisemiik Remove the CMOS battery on the motherboard for a few seconds. It looks like a watch battery. It will reset the bios to the default settings.
Thanks so much for posting these values! Did you try pushing it any faster by chance?
Thank u so much buddy! I tried #2 you said and it worked! The one in the video didn't work for me. Pc wouldn't boot
Thanks man. I just installed 2x8gb crucial Ballistix and my settings were the same and works great.
Thanks for the video dude, just got one of the same PC's and upgraded the ram only, needed this info!
Glad I could help!
If your pc is beeping 3 times and no start up, you have to unplug power cord and take out the motherboard battery for atleast 5mins. I almost took an L with my pc bro. 😢
Bro this shit happened to me right now imma try to do that tomorrow, this shit got me scared asf…
Leave everything unplugged and it out and do I leave the ram in
dawg same here shit on my pc
Dude you seriously need to give warnings with such things AND make sure you give clear instructions, really sporked my computer and took me an hour just to get it back, it is brand new so the overclock would have voided the warrenty
How’d you fix it
How did you fix it
@@alecstewart415 did you fix it
@@DTG_3 yeah I had to send it in for repair I’d be careful listening to some of these guys
@@DTG_3 there’s people that are saying take the cosmos battery out for awhile but I don’t know jack about computers so I was scared to do it
Thank you for the info. Got Vengeance 2x8GB running at 3200Mhz. Simply set it coupled at 1600 on precision boost.
i have a qestion when i copy my settings and restart my pc it doesn't save my settings is there a fix?
@@Koolboy13 Well I'm not sure exactly why it wouldnt be saving. I took the game mode preset on the left side of the program and modified that. Maybe make sure you select the right profile or preset.
Thanks bro! I watched 6 other vids trying to figure this out!
Thanks for the video man. I was thinking about adding ram to mine and overclocking it. Very informative
YOU THE MAN!! hope more people see this video
Thanks for showing me Ryzen master. In the hp bios, it dont give the options.
May check this out for overclock but I use MSI afterburner. Safe. You should get a stress test and show difference. Show the difference.
Hi, I know this tutorial is old, but it screwed up my pc.
I got the Memory settings to remain at 3200 from 2133 but when I followed your other settings like CAS Latency and all the others. i did the stress test and then the typical reboot but my PC would no longer start after those Ryzen Master setting were changed. Had to open my case and remove the memory and cmos battery. reassemble to get the pc to reboot. Luckily I was able to get back up and running. Pheeeeeew! Then I immediately went back to Ryzen Master and set thos settings back to auto. So this tutorial is not for everyone. Almost borked my pc. That said, my pc is the tg01-0023w
Don’t remove memory just cmos wait a while.I’m in same boat how did you fix brother?
Help me i train you in call of duty
TG01-0023W same here
@@mj-7444 As I said, I shut down by holding the power button until it turned off.
Then just opened the case. Removed the Cmos Battery.
But decided to remove the ram as well.
Pushed the power button 20 seconds while those were out to help expell any remaining errant charge.
Put it all back together.
Rebooted and all went well.
But I turned all setting back to auto in Ryzen Master.
But I left the Memory on 1600 per stick and applied the settings.
Then rebooted.
All good now.
@@dennisteagueCV41 I was so stressed out.
I read your comment again and thanks a million brother ❤️
@@dennisteagueCV41 fixed
You almost have it right just one thing this motherboard will not run anything over 2666. Hp does say it supports 3200 but will scale down to 2133 instead of 2666. So basically they are saying it will work just not at the actual memory speed. Set in coupled on and move memory and fabric clock to 1333 and in take manager it should actually say 2667 just like the factory memory amd go by what's on the side of your memory sticks and still use those timings leave voltage alone it will take what it needs. Your way will crash everytime this board will only run 2667 max and my way you will not crash and your pc will run like a whole new machine. Yes your way will say 3200 in task manager in windows to actually use the settings you have to restart and find yourself resetting cmos to get back into windows but it rejected the speed. If you set to 2666 and set all the timings to what the sticks have on them then your set. It dont matter if you have a 3200mhz stick set clock speed down. I received before 9123 and after 9785 this on my ryzen 7 3500x and same pc as you I just up grades from ryzen 5 3500. I have the erica motherboard aswell. Hp should not say it supports if it cant support at top speeds. Only way to get around this is to buy hp compatible memory. Hp has a locked bios. Just pickup some on ebay or scale your 3200 to 2666. Hp does this so they force you to buy their extremely overpriced memory. I promise this will stop alot of the head scratching with hp memory speed detection problem people are having. Its hp fault because they leave the memory upgrade spec open ended. When I first looked to my upgrade options on hp website what I was getting that it Supports PC4-25600 (DDR4-3200) and found in task manager it was 2133mhz. The memory it came with was ddr4 8gb 2666 from hp. Now I'm running ryzen 7 3700x with RTX 8gb 2060 SC Ultra and 32gb of corsair LPX set down to 2666 with 16,18,18,36 timings. Eats every game I throw at it as well as VR games set to max settings.
Holyy...
Yoooo, i just bought 16gb new ram 2666mhz but since the bios are locked they are running at 2133mhz. What can i do to overclock them then? :) please help🙃
@@oxidise3457 try doing everything he did with ryzen master but only take memory and fabric clock to 1333mhz and it will actually post 2667mhz in task manager why 2667 and not 2666 not sure but the hp memory that came with my pc actually posted in task manager at 2667mhz too before switching to faster memory to find mine was running at 2133 instead of 3200. The only one I found that worked was 2666 because board licks in at 2667 as it should because that's what it supports I have got it to 3000mhz but for some reason it will not post speed in task manager but 2667 post there weird lol. Hp just wants you to buy there over price cl20 cl22 compatible memory shit.
you can leave all the timings to automatic only adjust mem clock and fabric to same speed then restart and you should be good then you can play with timing if you like and runs some benchmarks. Just going from the 2133 it scaled me down to 2667 is a big difference on 3dmark it definitely shows. I'm just using the timings 16,18,18,36 that's on the side of my corsair vengeance LPX 3200mhz and only changing speed down to 2666mhz and leave voltage on auto.
@@oxidise3457 so you have the same pc and it still took a 2666 memory down to 2133 also. I'm glad I didn't go and buy 2666 instead of what I got to have to do be stuck doing the ryzen trick. I guess it's TRUE hp compatible memory will only work on these machines. My HP OEM ddr4 2666 memory is the only thing the bios will actually recognize and post correct speeds with out setting a bunch of stuff. Lol HP store is selling the memory we all need the plug and play stuff but they are wanting $349.00 just for one stick of 16GB 2666. Hahah 2 sticks is what a payed for pc WHAT. Here is the part number that everyone needs 1XD85AT
u can buy and install ram into the pc but overclocking the ram through the bios isnt a option and using ryzen master may not be an option either because of cpu/apu tg01 you got, so even if your ram can overclock to 3200 its going downclock because of the way the motherboards set up. it more hp wanting u to give them more money for there ram if anything.
well the ram u want to buy isnt gonna be from hp
Bro i love you bro from my heart
Np, Glad to help.
Does more hate in the world makes it a better place?
Any way it would help me a lot if you need to purchase something.
use my affliction link. for Amazon.
amzn.to/3L1GPCZ
Hello, thanks for a video. What i should do if I reside the same problem but with intel?
Thank YOU so much this helped !
No problem.
Here are some techs if you need to upgrade.
kit.co/RichYoYo/tech-i-m-using-right-now
I’m getting the blue screen of death now after I applied these settinfs
If resetting it does not work. You will have to take out the cosmo battery. And power down the whole computer.
ruclips.net/video/jCxt_2KLYWs/видео.html
Did removing the battery work? I just purchased this computer and thinking about adding more ram.
@@richyoyo9796 "cosmo" U mean CMOS?
@@hwhaht Yes sorry. hahah. Thanks.
Very clear and informative thank you
Amazing video, thanks a ton bro
got the same pc as you, applied the settings and pressed apply and test, and pc won’t turn back on. i’ve tried shutting it down with the power button and when i power up it beeps 3 times and nothing shows up
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
I have the exact same ram and pc .. can I just click auto over clocking and be fine or do o have to change all of those settings.. would you mind posting the actually settings I am sorry I confused what to change and what not to ? I don’t want to brick my system
I Tried the auto thing. and it didn't work for me. you can try it. It wont brick the system it would just not let you boot. so you would have to take out the cosmos battery and change the system again. I don't have the computer any more. I would recommend just watch it in a higher resolution.
@@richyoyo9796 is the over clocking of ram a noticeable improvement or is it extremely marginal ? Thank you appreciate the video
Its only like 2-8% increase in fps. That's why I don't do it. Not worth my time.
Nice work! Thank you!
Did you enter specific timings in Ryzen Master? Or did you only adjust the Clock sliders? I was able to get my RAM to 3200Mhz, but the timings do NOT match XMP. They are garbage. 16-18-18-36 (XMP) vs 22-22-23-53 (actual).
I set mine to what i set it to in the video. and I dont think i could enable xmp on an hp mobo. with ryzen. so idk how since i could not get in to bios. I didn't look in to it.
What voltage is the ram at? Mine is at 1.2v, 22CAS. I think you have to have 1.35v to get the faster timings. Anyone know how to get 1.35v on an HP? No xmp or RAM settings in BIOS.
@@charlese2833 I know that you can change ram voltage in Ryzen Master but I don't if it really works.
I got the r5 1650 super and for some reason mine came stock with 8gb 3200mhz, did that happen to anyone else? It said on the box it should be 2666mhz but I aint complaining lol
I got the same thing and got a r5 3600 instead of 3500
@@SynixCS Oh cool
That man this really helped me out
The memory speeds thing is really confusing, and I think I got it wrong and messed up my computer, every time I try to boot it gives me an error. ;(
Edit: now I just get a black screen every time I try to boot…. Did I break my pc? 😢
enter the bios screen again and put the multiplier down for whatever component you changed the multiplier on
Ya I did the same thing. I had to lower the settings.
Yes you did, you broke your pc, but not exactly... Your bios system isn't working properly. Try going back to your old ram and reboot your pc, also delete ryzen master. This just happened to me and it was a horrible feeling.
@@stopit8029 I know I'm late but do you know a way I can get my ram to run with the right speed, without Ryzen master(if I can get it working again cause it's black screened :()
Your awesome. I went from 2000 to 3200
My computer started to beep then I had to fix that but the Ram speed is still default
I'm not an expert so if you overclock things will it ruin the pc?
Yes it can ruin that chip that you over clock. by over heating it.
@@richyoyo9796 Even if there is a fan constantly on it?
question i kept the stick of ram thats lareaydy in there and added another one but the frequency is different the one hp came with 1333 and the one i bouight was 1600 will that change the results
Yes. it will. you will just have to try and run it. on the low settings or not. That's why its recommended same channel ram so it can run dual channel correctly. but dual channel only helps with like 6% of performance.
I bought a two 8gb vengeance ram stick, Installed this program and used tou exact same settings.... But it took me a half of day to get my comp to boot back up after I realized I had to take out the CMOS battery. After I did that the computer reset and booted fine and it ran the test but I dont know if those same setting are still applied
It is had the same problem
Please this has broken my brand new PC and I can't for the life of me figure out why. When did you take out the cmos battery how long did you wait and did you reseed the ram or anything?
@@voltage731 it should reset immediately. I had to do it 2 or 3 times.... but it's a gamble. I wouldnt overclock my pc with this app ever again. It's working fine now. If you get your pc working again dont run this app ever again or else you will have the same problem all over again.
@@mutechannel13 Yeah it's working now but I'm locked out of my PC for a month because I don't have the phone number attached to my Microsoft account.
Hey man, I followed these directions after installing new ram. My computer went to restart and it made 3 beeps, and didn’t turn back on. I waited for about 5 minutes and then manually shut it off and tried again, nothing. I went back to the original ram stick and the same thing happened, how do I turn my computer back on😢
@@anthonysavignano7042
A few times and a few people have gotten stuck on boot.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
This shit is so confusing
Ikr
when you applied the ram timings and settings does it go back to factory setting if you shut down the pc? do you do these settings every time (ram)?
It keeps it.
I couldn’t put the numbers exactly as Theo were in the vid now my pc started to beep and it won’t turn on after I restarted it 😔
Yep I did that too. it sucks.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
What about Intel CPUs? I just got 16GB ram 2x8 3200MHz but my PC still running 2667Mhz.... Any help appreciated
Sorry I dont know I dont have an Intel one.
You kill my pc hp pavilion gaming desktop bro
Thank you brother
Just crashes homie then I gotta pull the cmos any idea? Same EVERYTHING
I figured it out because someone here in the comments saved my ass.
Set everything to auto do not input 16/18 etc etc just leave them all on auto if not,
Lol just trust me.
so i did the setting from the vid and got 3 beeps and black screen. help lol?
@@flaveeericooo5438
lol
@@flaveeericooo5438
Open the case.
There’s a black screw on the back of the pc near the edge/center.
Undo that screw.
Slide the side of the case off.
Make sure you touch metal before reaching your hand in here too prevent damaging the motherboard.
Look inside you’ll see what looks a big coin 🪙 it’s called a cmos battery.
Unplug it from the socket and plug it back in 15 minutes later.
Now you’ll boot back too stock go back into Ryzen Master set ram too coupled mode on 1600/1600 hit auto,
Apply and test.
lol
@@flaveeericooo5438
And unplug it first
@@mj-7444 so just take the cmos out and wait 15 minutes then put it back in?
Do you have to overclock it? to get 3200?
I purchased the 3200mhz ram. No need to over clock
???
Isn’t the board locked to 2667? Even if 3200 worked it would only be in the OS, and rebooting would downclock it again.
@Winter Wolf you cant enable XMP on this pc. i have the exact same hp as in this video and its not possable. watched several videos on how to do it and hp has the bios locked for some reason. easily upgradeable my ass.
@@1972lesteryan have to agree with you
@@richyoyo9796 Does RAM stay at 3200 after reboot?
doesnt work my computer will not turn back on and beep 3 times then 2 times fast have to take battery out and unploug power supply and i have done it over 5 times exact same ram and computer as u just u got more space
You might want to try it with just one stick of ram at a time. sounds like it could be a bad ram. I've had it happen to me also it sucked took me so freaking long to find out what it was.
@@richyoyo9796 OMG THX I GOT IT TYSM U JUST GOT A SUB
I have the Tg01-2170m. I bought and installed the Oloy 3200mhz 2x16gb (MD4U163216CGDA) but my pc would power on but no display on my monitor. Putting the stock ram sticks back in displayed on the monitor again. Haven’t made any changes to the ram settings at all. I tried 1 ram stick at a time and neither worked.
Would resetting the CMOS help in this situation? Was nervous to do that incase it caused the stock ram to stop working without fixing the Oloy ram.
Any suggestions? Thanks!
You purchased no name ram. Please don’t do that in the future. Return it and get corsair or crucial.
Try one stick of oloy ram at a time. and see it that works maybe one stick is bad? this happened to me. then if both of them don't work still. you can try resetting the cmos. if you don't want to do that just. get another brand or something.
Does anyone know how to fix a 3 long beep and 2 short beep code for the hp pavilion?
Your stupid set up killed my pc. Got 3 long beeps and 2 short beeps as SOON as I pressed restart. So now I gotta take the damn thing apart and plug out basically everything and put everything back together all so i can use my pc i just got.
Take cmos battery out for a min and put back in place. CMOS battery looks like a watch battery on ur mother board
Yep I did that too. it sucks.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
Yep I did that too. it sucks.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
My Ram says it needs 1.35 volts? Where the hell do you set that? I don't see an equivalent to "XMP VDD" for Ram?
I failed to boot until I hit the button that says "Push All Auto." That changed all voltage and timings to auto. My timing jumped to 22 but running at 3200.
Hey I did this with my hp pavilion and it's taking a while to boot up is that normal
Sounds a little weird. maybe you did to much or two little?
Same did u fix it
You guys figure it out?
@@alecstewart415 i just restarted it till it came with a bios update and that fixed it
@@markusknutsen3308 ahh okay you and I have different problems then mine just beeps and won’t turn on
whats is the alternative if you have nvidea and geforce version of the pc instead of ryzen
i just used your same settings i have the same pc and everything but after i did it my valorant keeps crashing and idk why
Maybe settings were to high. I did this to my computer also. I had to lower the settings.
I tried this but when i try to turn on my pc it just starts to peep and doesn’t open😢😅
A few times and a few people have gotten stuck on boot.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
I just bought this yesterday and I have a question. How do I set this up to my Samsung monitor? My monitor has HDMI in, RGB in, and DC14V. What wires do I need and can you give me a step by step please? Thank you
Just plug the computer in to the monitor with the HDMI. and plug in the power cable for the monitor and computer power cable. and plug in the keyboard and mouse. and you should be able to turn it on.
It's also making this weird noise when I trun it on this blinking thing
this destroyed my pc and to fix that isue with no display you need to remove the bios battery and replace it after 30 seconds
if this was help full please tell me that you removed al the amd ryzen master program files
I put the exact ram and did the exact settings in that computer and now it won't boot. 3 beeps. Can you please help.
you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I didn't it to my computer also.
Ok I got it back up. Do u have a Facebook so we can private message and maybe u can help me out im sorry
@@coreyhoard I would lowering the settings of the ram first. and slowly increase it. but my face book is chin ch. i dont use it really.
My computer is ruined thanks 👍
No it’s not
@@talonaskelson9450 it’s morbin time
@@fortinator88 huh
@@talonaskelson9450 I have hepatitis b
So I did these exact same steps for my computer. Put in all the right numbers in Ryzen master, applied and stress tested, showed my changes in Ryzen master, but in task manager it’s still showing the original ram speeds.
I'm not really sure. Did you try restarting it. and check then?
@@richyoyo9796 Hi, can I uninstall the program after the operation?
@@Stefano7010. You can if you want. but if it crashes or so it will revert to default settings.
Whenever I put in my setting my computer restarts and then beeps 3 times I did everything right do you know how to fix
Yep I did that too. it sucks.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
don't do it this way my pc got messed up because of this I had to take out my cosmo battery
Yep, I had to do the same thing.
I used to be able to change my ram to 3200mhz using ryzen master but now when i do it it gives me a black screen forcing me to remove the cmos battery and put it back to get it to work again
Must be going bad? Try lowering it?
@richyoyo9796 it worked fine at 3200mhz but one day I check and it went down to 2400 now if i try to put it to 3200mhz again it gives me the issue the pc supports 3200mhz according to hp
thx this worked for me but im a litte bit stressed because my ram voltage is 1.2v and im running 3000 mhz is it safe
How do i reset the battery or whatever to get my pc to boot
Rich Yoyo
2 weeks ago
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
@@richyoyo9796 thanks for the response I RUclipsd it earlier and it fixed it
😭😭 mine says your processor not supported I have a ryzen 3 5300 G do anyone have a solution pls help
I think you have to switch back. Hp mobo only support the 3000 gen I'm not sure if you can upgrade after. Here's where it tells you what it supports. thanks for testing it out for us. The chipset is . AMD Promontory B550A
support.hp.com/us-en/product/hp-pavilion-gaming-desktop-pc-tg01-0000a/37874510/document/c06418627
I bought this same pc and bought 16gb dual channel silicon power 2666mhz sticks. When I go to boot all I get is 3 beeps then 2 short beeps. Ram is set in place just fine and I swap them out in deifferent configurations and still nothing. Even took the cmos battery out for a min and tried again with the same results.Any advice?
sounds like ram. try 0 ram, first then 1 ram, then 2 ram, try that out first, try it the 0 ram and boot I first.
Did you fix it
Your BIOS system isn't working, thats whats happening.
1st: Try going back and install your old RAM you had before
2nd: reboot your pc then launch ryzen master.
3rd: Stop the stress test then leave ryzen master. After that delete Ryzen Master
Last: Unplug your pc then plug it back in then start it up.
Should be able to go back to normal. I just went through this and I want to make sure people could fix this issue because its pretty scarry. Hopefully this helps anyone if they are having this same issue.
why my 3600 mhz ram only displays 2667 and on hp we don't have the XMP profile
Did you change it in Ryzen master? I think the limit is Supports PC4-25600 (DDR4-3200), says on the mobo website.
support.hp.com/us-en/product/hp-pavilion-gaming-desktop-pc-tg01-0000a/37874510/document/c06418627
@@richyoyo9796 is it dangerous to modify on ryzen master or not?
@@ayoubjagh6512 sorta. But it's the only way for you to do it. Since hp won't let you change anything in the bios. Just set it to the 3200 first to see if it runs. If you mess up you have to take out the bios battery.
@@richyoyo9796 i just tried it and i am currently using 3200 mhz so am i safe?
@@ayoubjagh6512 yes I would recommend staying at that. You can change the time and stuff if you like but it's up to you. Many it would help in 1 fps or 2.
My desktop completely unable to boot up after following these setting.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
Hi
Did this now my pc beeping.
I did this to my computer also. I had to lower the settings. you have to take out the cosmo battery. to reset it. youtube how to do that.
Same thing is happening to me
Yes I have the same pc everything down to a T except I bought the 16gb 3200 sticks and set my settings to the ones cpuz provided "only changed the ones you have" and now my system will turn on but not boot up or anything any suggestions?
Yes it happens to me too. You have to figure out what the ram setting are and change it to that. I would lower the mhz till it works.
is this the best ram you can get for this build?
what do you mean best? best as in the most ram you can get? The most ram you can get is 32gb. and yes 3200mhz is the fastest you can do with out overclocking.
Thanks
can someone explian to me what will happen when you upgrade the ram? yes I am stupid so what. but will it make that Desktop which I have run games better? what is the benefit?
7% better frame rate. While gaming. If you get money more stick the same kind of ram.
My Tdc and edc won’t surpass 100 how do I fix that
I just bought this pc. For having a gaming pc. But for normal desktop. Will like to play some games at 1080p to 1440p @ 60
So what should I get for higher ssd capacity.
Upgrade ram.
which ones should I get?
Then at some point will I be able to Upgrade the gpu?
Here are the things I get for my computer. ,
Corsair Vengeance LPX 16GB (2x8GB) DDR4 3200 for ram. is what I have.
WD Blue 3D NAND 1TB PC SSD, ssd or larger if you like Idk how many games you like keeping installed.
and yes when the release new gpu you can get new ones. but you have to figure out if the power is enough an also if the size fits in the case.
kit.co/RichYoYo/tech-i-m-using-right-now
@@richyoyo9796 Thank you for the information and the link.
@@richyoyo9796 i have another question.
I'm new to the PC gaming setup. With this desktop. Do you have any recommendations on the settings under the Nevada app that's on the computer?
I don't know if I messed something up or not. But my xbox game bar did give me a FPS option.
After I was changed a few settings. I can not seem to get it to show the counter at all.
I was playing resident evil 7.. not at 1440P and I wanted to see what it was. Could never get it to show me FPS.
Ive never messed with the nvidia app. i just use the game it self to change settings. and I've never use the xbox game bar for fps it was mostly msi after burn for that.
I have tried to change the ram settings but everytime I change it I get a black screen
Which setting you setting it to?
Rich Yoyo well I have different Ram and when I copy the stuff from CPU z it doesn’t work
@@zen_1996 Idk which ram is supported by Hp, try to lower the mhz of the ram, till you can get it turn on. then you can adjust it.
Like it’s works fine I was just trying to fix the speed it’s capped at 2400hz but it’s supposed to be 3200hz
@@zen_1996 which ram did you purchase?
I got a black screen from it how do I fix it
@@AndrewMarkoos Here are more info about the computer with CpuZ. ruclips.net/video/j8yydggBjNU/видео.html
Upgrading Ram and Fixing Speeds. ruclips.net/video/HfGd1rfgZqY/видео.html
Opening up the Hp Gaming PC. ruclips.net/video/SNvpLI-23Uo/видео.html
what parts can you upgrade. ruclips.net/video/cq3RvtvaXkE/видео.html
A few times and a few people have gotten stuck on boot.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
Hi I did this and I restarted my pc and it is beeping and it wont display anything on my monitor
I did this to my computer also. I had to lower the settings. you have to take out the cosmo battery. to reset it. youtube how to do that.
bro i have the same issue but i have a intel cpu i dont have a amd ryzen is there anything i can do?
Sorry. Not to my knowledge. You will need to check if Intel has a software.
Hey i got a AMD ryzen 7 5700g, Just got 32gigs 2 fury beasts and tried doing the same thing, when I hit apply it just reverts my settings back. windows 11 as well could you help?
Sorry I'm not sure. I don't have an windows 11
Do I need to change my PPT, TDC, and EDC settings to match yours for this to work?? When I click "auto-overclocking" by default mine is set at 1000 PPT, 114 TDC, and 168 EDC. Any help would be appreciated!!
If its the same ram you can match it. then you can change it if you want to see if you can overclock it.
all i did was set coupled mode on the ram, and change clock to 1600, if was fine for about 3 months or so running great at 3200mhz, i noticed last night my ram was back at 2133mhz, iv tried multiple times to go back in and change it back, and i just get 3 beeps when my computer tries to boot back up. i have the same computer, 2x8gb 3200mhz PNY XLR8 ram. i dont understand...
I'm not sure. hmm try lowering it to 3100mhz or a lower one? see what happens. it should work.
I got the same ram and out it in but when I check the specs in settings It still says the old ram
Did you get ryzen master to change it?
@@richyoyo9796 yes
@@richyoyo9796 could we go on a discord call or something and you can help me
yes we can.
@@richyoyo9796 what’s your discord
Why you not setting mhz at the bios
Can't change really anything in the bios. Hp didn't install it. It's hp own bios.
@@richyoyo9796I have a similar issue. However, I have a intel cpu and a gtx 1660.
My original ram ran at 2666mhz, and recently I bought 2x16GB ram that should also run at 2666mhz, but it didn't; it ran at 2133mhz.
@@moosemuffins2191 it's probably. Running at a lower speed in idle. If not. It's the ram. Get the same ram?
@@richyoyo9796 I checked. My original ram is Kingston 2x8GB 2666mhz ddr4
I went and bought the second best option, Crucial 2x16GB 3200mhz. I had a hard time finding the perfect option, in general.
What the best processor this motherboard can handle?
hp says 3700x
support.hp.com/us-en/product/hp-pavilion-gaming-desktop-pc-tg01-0000a/37874510/document/c06418627
@@richyoyo9796 Thanks!!
What did you base the CAS settings on?
Issue I have is CPUZ says 933mhz but task manager is at the right 2933 (max rated for the controller) so don't know who to trust
Yes true. it under clocks it when its not running anything to save power. were you running anything?
@@richyoyo9796 no but my pc doesn't do that 5700g). Yet the mother in law's does (hp 3400g) . I'll have to go around and run a load and recheck but I can't seem to find anything to show the ram itself is dynamic
I’m scared to do it that I will mess it up
Yep. It can mess up. I made it boot to black screen. it sucks. but you can always reset the small battery.
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
i have the same pc but nvidia card
Can I use Ryzen Master to get my gaming RAM to work at the correct speed with an intel i7-7700K?
You can just get it and test it out. but probably not. since its and different company.
Where do I find the CAS write Latency?
Holy shit I had to cmos reset my pc and it scared the hell out of me
Hey just tried this and when I hit apply and test got 3 beeps and the computer won’t send a signal. Turned off OC on the cpu and just had it set to ram. Any idea what’s going on?
if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
@@richyoyo9796 I figured it out, just set the mem speed and the rest to auto, works fine with the settings the computer decides
My pc wont start anymore
If resetting it does not work. You will have to take out the cosmo battery. And power down the whole computer.
ruclips.net/video/jCxt_2KLYWs/видео.html
Did removing the battery work? I just purchased this computer and thinking about replacing the ram.
You have to remove the battery if you mess up the ram settings and it get stuck in boot or blue screen of death. and you have to change the ram settings again.
I got 3 beeps and black screen after applying these settings. Had to reinstall the stock ram. Are my new sticks fried now?
EDIT: they are indeed fried as they continue to give beep codes when I installed them again. CAUTION WHEN USING THESE SETTINGS!
EDIT EDIT: This completely ruined my PC somehow. It’s stuck on an infinite blue screen restart loop. Won’t even run windows or allow me to reset my pc. DONT DO THIS!!!!
Yep, I did this also. pc got messed up because of this I had to take out my cosmo battery, then that fixed it. and try a different setting
Oh it happened to you too huh? Well maybe you should put a disclaimer on your fucking tutorial video then.
Got same pc, with Oloy ram 32gb(2x16) and using your settings made my pc die had to reset by removing battery from motherboard got no idea how to get ram at full speed
You might have to look at the motherboard settings and check your Oloy ram settings. to check what would work. since my ram speed is different than your Oloy ram speed.
@@richyoyo9796 I got it to run at 3200 without tampering with the settings keeping it all on auto and changing the values to 1600
i have no clue if you will bother respond to this comment even if there is an answer.
But I have just bought ddr4 8gbs ram with the same model of this computer, I properly put the ram stick in (the new one) the second i boot it up i get a black screen and my pc starts to beep is there a way i checked the specs for motherboard and should be compatible to work, do i just have to change things around in the bios/ryzen master in order for my new ram i just bought to work.
The ram is not damaged and i have watched a bunch of tutorials but now i just need to comment and see if someone has the answer and maybe you can help if you respond thanks for taking your time to read this, i am just slightly disappointed if i bought ram and it ends up not working.
Even though it definitely should be able to.
It could be bad ram. Just try switching it. Try it by it self and other alot and stuff. Or could be ram slot bad. I've had bad ram with this new tech since it's so small transistor it gets easy damaged.
@@richyoyo9796 unless is it because the ram i got is 3200 mhz and the motherboard runs 2666 mhz i feel like that would not change anything but it would downclock the new one to the motherboard, and i tried cleaning inside the areas and the ram itself is so i think i might just have to get a different type of ram.
@@Swhatt yep happens to me too. After checking so many things. Just try another one.
Do you know the settings for 3600mzh
I just tried this on my PC and it won’t boot now.. I have no display. Reboot doesn’t help.. PC is unresponsive..
ya I did this to my comp to. Also a lot of people did it also . if your stuck in booting. you have to unplug the power cable. And then open it up and take out the small Cosmo battery thing. You can youtube it. That will reset the computer. I did it to my computer also. You set the settings to high. There's a lot of ppl who done it in the comments. also asked about it.
I got a question does this happen to all of the tg01s? because I have thr tg01-2003w and it only has 8gm of ram but the speed is 3200 im upgrading to 32gb of ram tomorrow so I was wondering
If its Ryzen then yes you can set it up to overclock.
@@richyoyo9796 yup I got a ryzen, so I would have to go to ryzen master and do those settings? I thought it would automatically do it once I put the ram because mine goes at 3200 already and your version of tg01 goes up to 2666 (im new to stuff like this so im just wondering)
Just install it and check what's it and and see if you want to over clock the ram or cpu. I'm not sure what the motherboard will do.
@@richyoyo9796 alright thank you my motherboard is the erica6 it says it handles 32gb 3200 so I should be fine