Not enough experience being an excavator operator..They should help to dig a trench and make it into a ramp so that the excavator can climb up...this is too easy for me..unless if the excavator get stuck inside the mud or blue clay
Yes it was painful to watch the guy on the Volvo. First thing he should have stretch the boom out to full length to get more weight in front of the machine instead of leaving it with it up in the air with the arm curled in. Oh well. LOL
I have NEVER seen such a group of non operators in my entire life. They have 2 excavators destroying the one in the hole by ripping it apart, instead of first taking 15 minutes digging a simple ramp so he could track himself out with no problem.
Yes Jim P that was the first thought I had ! Some guys like to make it difficult!! Lets just say - "Not the sharpest pencil in the box" - and that applies to them all!
It would appear that there is a level of cluelessness with those machine operators. Any good operator would drive the excavator out of that hole without any issues.
Yeah they are really dumb the arm is all the way up, which makes the machine want to lean back. Reach out and pull yourself out, or let the dozer help you as you drive out. Im
There were a few close calls like that. Neither the operators, nor guys on the ground have any situational awareness or common sense when working around each other.
This may not seem obvious at first but the counterweight was tuck inside the hole. That prevented the excavator from being able to move its boom sideways and digg dirt out the way to create a path. Either way, all they needed was one track to lock bucket with the one in the hole and give it leverage to track out the hole.
I AM AMAZED! This machine, under control of a competent operator, would dig its way out of this with no issues other than some wasted time. What a bunch of drama queens. Laughing my ass off!
I really don't know whats the use of other excators and a dozer, this machine is working well,, so if there was some one smart enough will let it start n make a slope and drive it out... I don't know whats all this drama was for.
Excavator digs dirt, excavator in hole deeper then excavator, hmmmm use excavator to dig ourself out? WTF? Must have been his hair he kept flipping out of his face. Damn I need that job.
I'm no expert professional but I think one excavator could have gotten him out with just a little ramp digging and pulling the stuck one about 5 feet to get him a little more level.
ut000bs I'm also no expert, but having operated one of these beasts before, I'm sure the one in the hole could have gotten out of there on his own, as long as his engine was still running.
ignore those people in power and have the workers do it faster. If I was the operator I would tell all of them to shut up and only one guy give directions
I don't normally comment on these videos but that was fuckin ridiculous - How the hell did he manage to make that so complicated and then to have dozer pulling as back of his bucket was against the edge of the hole as he's yelling pull pull, He'd be sacked for that places I've worked.
Dont get why he didnt extend his arm and dipper out instead of leaveing it up an makeing it more tippy. Or y he didnt try to extened as the dozer was pulling on it would have been better then haveing two machines putting all that pressure on the idelers and almost wipeing out.the hand rail and mirror. Nothing about that was good.. there was no need for any machine to come in contact with one another. . Was a brand new machine. They would all be fired if I was there boss and saw that circus. .
I am aIso an operator of backhoe and this is my first time to see it assisted by others. if his prob was its because he cant turn and use its arm to push itseIf out its because he did not make big enough to hoIe from the very start in order for him to turn 360.
Where do you boys suggest he put all the material while trying to dig himself out. No room boys . cant you see that . He would have himself buried real quick.
stitsenj He could've deposited the dirt behind him as he moved, it's the same reason why it's possible to actually dig yourself out of a hole, you simply step onto the dirt you've just dug until the hole is filled and you're outside the hole or you've created steps or a gradient. In the end he basically did that.
stitsenj that is how he gets himself out but there is a quicker way suggested by others- that is learn how to operate and ultimately don't wind up in the hole in the first place.
I just love it when a plan comes together, Two Machines plus a dozer, and six people that don't know what in the hell to do..this is just a big cluster fk, See Ya
Make a ramp, and get yourself enough room to turn around and push yourself out. Could have done this with the one excavator. It's not buried to the cab, and the dirt doesn't look that soft.
Maybe I'm just not seeing it, but I have no idea why that wouldn't walk right out of there. Motor ran, hydraulics worked, drives were in operation, there's no reason why they should have that much trouble getting it out.
And when They got to the Bar that Night I bet they told everyone how clever they were in getting the thing out and it only took one full afternoon to do it!! Seriously, they let people like this operate heavy equipment?? THey shouldn't even have a car Licence.
I cringed watching this. It's scary that people like this operate equipment. I cringed watching them pulling teeth across the tracks. An operator with 1 day experience should have been able to dig himself a ramp out.
I'm really confused as to why they were pushing on the tracks. If that wasn't a newer machine and they had the junk i use they woulda just broke track or worse snapped the whole thing in half.
Does he not know he could of turned to the opposite way and push himself out with his bucket backed himself out, while his other operator makes him a decent ramp?😂 these fellas ain’t from Texas I can tell you that much!💀😂
Sorry to spoil the fun - but why couldn't the excavator in the hole - simply dig himself out - he could have made a ramp and simply drove out!!!!!!!!!!
They are making this so dang complicated. Not only could he dig himself out, but it could happen 3x faster if the other two start digging out a ramp as well.
The comments section just proves how unkind people are to incompetence. One thing is incompetency, but the pride and verbal bashing I see is horseshit. Funny thing is, these youtubers on the comments section I think probably dont know the slightest thing about driving these vehicles.
Why didn't they make a slope with on of the other trackhoes and walk it out? Seems like a lot of waisted time to me. Oh yea and what's with the hippy dude flipping his hair the whole time. You can tell he's the worm of the outfit.
Lower and extend the Arm on top of bank first.Itis all he has to do!Period!Volvo not very strong on traction and hydraulic system.Hitachi Top of the world!!!
I've seen lots of Equipment get stuck, and need help to get out. It happens. No big deal. This is NOT one of those situations. The ONLY (polite) comment, I can give this "Operator" - For undermining his own machine, and 'falling' into his own pit, is: " *Lucky you landed upright and aren't hurt. You can pick up your final check tomorrow morning at the Office* ".
I couldn't agree more in 11 years as a professional operator (4 as a business owner and no I didn't inherit it) I've never seen such a pathetic excuse for a crew. Must b some kind of government program like DRJP or similar. Companies that can afford that much late model, high-end equipment wouldn't even hire idiots like that to take out the trash
Someone was to close to the bank with how wet that material is she gave way and the machine slid down and over she went and the stick cylinder stopped at the bank
Hahahaha that's not a volvo excavator it's a rolvo lol I've been an operator for 22 years and im wondering...how in the world did this go down lol Was he digging alongside and the bank gave way? I worked years ago for a company after I just moved to a new area and the bosses son really thought he was something on his new excavator...he sucked big time lol He was digging with his tracks parallel to the open excavation and at the time i was running a loader and I stopped and gave some friendly advice and suggested he turn his tracks and dig off his idlers and he basically told me to fuck off so I did cos he's the bosses son and I just started and needed a job otherwise id have punched him into the cut....ten minutes later he looked like this guy but upside down...luckily he had the seat belt on and and had the boom up when he went over. Seat belt kept him from falling out and being squashed and boom protected the cab from crushing, other than a crushed pride he was ok. It was great cos he was an asshole...looked good on him. I ended up on a hoe a couple of weeks later and he come up to me one day and apologized and recognized that he should have taken my advice as he saw I knew what i was doing as I'd already at that time been operating for about 15 years. He was much younger than the rest of us but figured his daddy's the boss so I'll treat them like shit. He changed his attitude toward everyone quickly after that...he wasn't so cocky lol
Who said these guy’s were operators? Looks to me like a bunch of idiots trying to rip the tracks off of the excavator to me!!🙄🙄🙄
Awesome
When I saw this video first thing I said is “ how the fuck can a trackhoe be stuck in dirt” ?? Lol 😂 because of the dumb ass operators...
Painful to watch.Dig a ramp in front of the div and track it out 3 machines and NO brains
Not enough experience being an excavator operator..They should help to dig a trench and make it into a ramp so that the excavator can climb up...this is too easy for me..unless if the excavator get stuck inside the mud or blue clay
Exactly
Yes it was painful to watch the guy on the Volvo. First thing he should have stretch the boom out to full length to get more weight in front of the machine instead of leaving it with it up in the air with the arm curled in. Oh well. LOL
Just kept saying to myself the whole time y can they just walk it out lol
🤣🤣🤣🤣🤣🤣
Trying to pull it out of the hole with no operator... Wtf? Every one of these guys should be restricted to Tonka.
ronald regan I had lot of excavators on my jobs good operators but looking at those morons makes me sick l would bury them in that hole .
😁😁😁me and my husband is laughing about this video
Oh no they aren't qualified to run Tonka either .
Not even safe with Tonka's! hahaha
These are stick pullers, not operators. I'm glad this was captured on video so everyone can see NOT how to recover an excavator!
You are so right I believe with two excavator and a dozer I believe I could have been out in less than a hour I could be wrong but I don't think so
Shit, they wouldn't make a pimple on a stick pullers ass. Straight up seat warmers.
Seems they will rent equipment to anyone. Not a one of them had a friggin clue!
Amateurs
@Weston Jesse bro its bot?
Idiots
that guy has no business in that trachoe, my little girl could of got that out in about 15 mins....lol
I have NEVER seen such a group of non operators in my entire life. They have 2 excavators destroying the one in the hole by ripping it apart, instead of first taking 15 minutes digging a simple ramp so he could track himself out with no problem.
+Jim P yes indeed
Jim P
Bunch of drunk idiots. That's why I dont rent my machines
Yes Jim P that was the first thought I had ! Some guys like to make it difficult!! Lets just say - "Not the sharpest pencil in the box" - and that applies to them all!
Jim P Bunch of morons don’t know a thing about excavators the dummy in the hole could come out easily if he know how to operate machine .
It would appear that there is a level of cluelessness with those machine operators. Any good operator would drive the excavator out of that hole without any issues.
Fabian F and
Yeah they are really dumb the arm is all the way up, which makes the machine want to lean back. Reach out and pull yourself out, or let the dozer help you as you drive out. Im
That guy leaving the pit at 7:40, nearly got the hardest smacking of his life. Which would be over then, i reckon. Close one.
There were a few close calls like that. Neither the operators, nor guys on the ground have any situational awareness or common sense when working around each other.
now we know. if stupid fell in a hole how would it get out
The "ledge gave way".....so let's park two more on the ledge.
I thought that I was an idiot when I got stuck in a ditch with the excavator. I can see there are worse operators out there. 😜
"Let's use the teeth on these excavators to make the tracks move" - LMAO I like the close call at 7:40 where he almost takes out the human...
+Bill Ray I was waiting for a part of one of the tracks to break off.
I saw that!!
THATS ALOT DAMAGE
Not an operator between them. Any one who is an operator knows that machine would walk out of there!
diggeraver Totally Agree, that's probably how it ended up there in the first place!
For a machine thats about to tip over the boom is up very high!!!!!!!!!!!
Yes for safety anchor with a cable the shovel end to a dozer (for weight balance) and it can climb 60 degrees easily.
exactly... ive been in far stickier situations and breezed out...
+diggeraver
A agree.. the operator almost smashed the guy running up the bank at 7:42.
He could get out of the hole so easily, unbelievable
I reckon.
Rtrrtrtrttttrttrrtrtttttttrttttt4rr 4th jnbrggfrftrrtrrttrtrttrrrrrrrryrrrttttrtrr trrtttrtrtrytrrrttrrttrrtrrtttrtttyttr rrtrrttrtrrtttrrtrttttrrrrttrtttttttttrrtttrrrrtrttttrrttyttytt errands rrtrrttrtrrtttrrtrttttrrrrttrtttttttttrrtttrrrrtrttttrrttyttytt Rtrrtrtrttttrttrrtrtttttttrttttt4rr 4th rrtrrttrtrrtttrrtrttttrrrrttrtttttttttrrtttrrrrtrttttrrttyttytt Etty rtrrrrtttrrrrtrttrtrtrrtrrtttrrrtytttrtrtrtttrrrrrrrrrtrrrtrrtt rrtrrttrtrrtttrrtrttttrrrrttrtttttttttrrtttrrrrtrttttrrttyttytt rtrrrrtttrrrrtrttrtrtrrtrrtttrrrtytttrtrtrtttrrrrrrrrrtrrrtrrtt Terry tttyttytyyyryrttyrtyrrtrrtttttyrtrttrtrt ttty
7:44 near miss. Nothing is so important as to cut it that close with men on the ground.
Ok I see NO reason that machine couldn't get out unassisted
blknies He doesn’t know how to operate lawn mower totally dummy .
Could pull and track my self out of that 2 minutes
I would fire every one of them. An operator never leaves his seat. And by golly there wasn't an operator 1 on this job that I could see.
Just because they know how to use the controls doesn't make the professional operators
Well said
Randy Nichols They don’t know anything about those machines , they just destroying expensive machines .
@@dennyskerb4992 I feel you bro
Surely a competent driver wouldn't find himself in that situation. TOOL!
This may not seem obvious at first but the counterweight was tuck inside the hole. That prevented the excavator from being able to move its boom sideways and digg dirt out the way to create a path. Either way, all they needed was one track to lock bucket with the one in the hole and give it leverage to track out the hole.
Sell the diggers to someone that can operate them,problem solved
I AM AMAZED! This machine, under control of a competent operator, would dig its way out of this with no issues other than some wasted time.
What a bunch of drama queens. Laughing my ass off!
Just fill in the hole and tell the insurance company someone stole it
MrSkypony You , my friend must be from the Caribbean somewhere.LOL
These types of incidents are why it's so hard to get into heavy equipment operation without years of experience.
someone needs to read mike mulligan and his steam shovel so this won't happen again
Развели спасательную операцию , хотя мог в лёгкую выехать без чьей-то помощи,цирк!
You are never really stuck in an excavator until you can no longer swing the arm. Otherwise just dig your way out.
wow excavator stuck bad day . nice video
Can't believe they didn't rip the tracks off with that genius move at the beginning
I really don't know whats the use of other excators and a dozer, this machine is working well,, so if there was some one smart enough will let it start n make a slope and drive it out... I don't know whats all this drama was for.
Hasta un principiante hubiera sacado ésa maquina en minutos
Excavator digs dirt, excavator in hole deeper then excavator, hmmmm use excavator to dig ourself out? WTF? Must have been his hair he kept flipping out of his face. Damn I need that job.
way to fuck up a brand new machine ....
The man pulling on the chain at 7:11 looks like he is trying to pull the excavator out of the hole all by himself.
really a bunch of not very well educated equipment operators
calthmlikiseethm The dummy in the hole could come out easy if he knew what to do , just a morons
wow good job!!! nice video
Like so many situations with inompetents, we have to have a lot of yelling at each other.
they are in serious need of operators ! accidents happen but dang . that is just stupidity run amuck
7:42 - anyone else see the bucket barely miss that guy?
дебилы сука не руские
WTF In the idiots category these guys won the first place - This video should be named ((HOW TO TRY DESTROY AN EXCAVATOR INTENTIONALLY))
I'm no expert professional but I think one excavator could have gotten him out with just a little ramp digging and pulling the stuck one about 5 feet to get him a little more level.
Im no expert but im sure i could have dug him a ramp with a shovel and saved all kinds of money...
ut000bs I'm also no expert, but having operated one of these beasts before, I'm sure the one in the hole could have gotten out of there on his own, as long as his engine was still running.
Josh Bobst That's right . I think the moment he fell in he forgot that he was driving a EXCAVATOR. They dig holes and RAMPS.
ut000bs .
Trying to think of something sensible to say, but, what the fuck are they doing ? Tracks, rams, joints, pins, everything's going to be fucked.
Non brain using🤒🤒
ignore those people in power and have the workers do it faster. If I was the operator I would tell all of them to shut up and only one guy give directions
I could have got myself out
A
I don't normally comment on these videos but that was fuckin ridiculous - How the hell did he manage to make that so complicated and then to have dozer pulling as back of his bucket was against the edge of the hole as he's yelling pull pull, He'd be sacked for that places I've worked.
A good excavator can't pull a sick excavator only by traction! A good excavator can pull a sick excavator by the power of the boom pul !! edoardo
I got faith in the cat
Dont get why he didnt extend his arm and dipper out instead of leaveing it up an makeing it more tippy. Or y he didnt try to extened as the dozer was pulling on it would have been better then haveing two machines putting all that pressure on the idelers and almost wipeing out.the hand rail and mirror. Nothing about that was good.. there was no need for any machine to come in contact with one another. . Was a brand new machine. They would all be fired if I was there boss and saw that circus. .
E
I am aIso an operator of backhoe and this is my first time to see it assisted by others. if his prob was its because he cant turn and use its arm to push itseIf out its because he did not make big enough to hoIe from the very start in order for him to turn 360.
Glad I’m not the only one who thought it was painful to watch
Yeah !! Lets rip the tracks of a tidy Volvo
I believe I could of got that machine out of that hole using only its own power as long as it was running properly
Aaaa.... is it just me or coulndt this excavator dig himself mostly out and then walk out???
Exactely
Where do you boys suggest he put all the material while trying to dig himself out. No room boys . cant you see that . He would have himself buried real quick.
stitsenj except that the other 2 machines could build the out ramp and deposit the dirt outside the hole.
stitsenj He could've deposited the dirt behind him as he moved, it's the same reason why it's possible to actually dig yourself out of a hole, you simply step onto the dirt you've just dug until the hole is filled and you're outside the hole or you've created steps or a gradient. In the end he basically did that.
stitsenj that is how he gets himself out but there is a quicker way suggested by others- that is learn how to operate and ultimately don't wind up in the hole in the first place.
I just love it when a plan comes together, Two Machines plus a dozer, and six people that don't know what in the hell to do..this is just a big cluster fk, See Ya
WTF
Make a ramp, and get yourself enough room to turn around and push yourself out. Could have done this with the one excavator. It's not buried to the cab, and the dirt doesn't look that soft.
These guy's should NOT be allowed in equipment!!
That Volvo should easily be able to extricate itself with very little problem, and without having to dig.
When I seen the guys jeans tucked in his boots I knew this would be a good one
Awesome video!!!
Maybe I'm just not seeing it, but I have no idea why that wouldn't walk right out of there. Motor ran, hydraulics worked, drives were in operation, there's no reason why they should have that much trouble getting it out.
Talonious X Rx
Good way to break the track! Get some chains!!!!
God I miss working in pipelaying, used to be great laugh watching everyone panic and argue when a machine got bogged, best job in the world
And when They got to the Bar that Night I bet they told everyone how clever they were in getting the thing out and it only took one full afternoon to do it!!
Seriously, they let people like this operate heavy equipment?? THey shouldn't even have a car Licence.
I cringed watching this. It's scary that people like this operate equipment. I cringed watching them pulling teeth across the tracks. An operator with 1 day experience should have been able to dig himself a ramp out.
I've operated CAT excavators for 10 years and there was an easier solution than that
The owner of this company needs to fire all three of those monkeys
why not fill the hole with water and let it float out?
MegaJohnhammond ? I guess because steel won't float on water.
Josh Bobst I wonder what all the navy ships are made of. JK
MegaJohnhammond yeah thats a fantastick idea because everybody knows that steel floats
MegaJohnhammond im assuming he was being sarcastic, its as good of an idea as any of the tards in the video had.
Josh Bobst Non sense .. Ships Float , and they are made of Steel..
LMAO..
I'm really confused as to why they were pushing on the tracks. If that wasn't a newer machine and they had the junk i use they woulda just broke track or worse snapped the whole thing in half.
this is what happens when you go to the Democrats School of heavy equipment operating
blame the dirt blame the weather lol
What a load of idiot crap!
where did he get his ticket?
in his cereal box? 😂😂
If you’re going to travel at night, you gotta turn your lights on 🥴
Does he not know he could of turned to the opposite way and push himself out with his bucket backed himself out, while his other operator makes him a decent ramp?😂 these fellas ain’t from Texas I can tell you that much!💀😂
Fill the hole with concrete cover the whole machine and the operator with it !!!
I can see how this happened....not an operator in the bunch.....
So they could dig a ramp or he could jam his bucket and crawl the how out these are not operators by any means
Sorry to spoil the fun - but why couldn't the excavator in the hole - simply dig himself out - he could have made a ramp and simply drove out!!!!!!!!!!
They are making this so dang complicated. Not only could he dig himself out, but it could happen 3x faster if the other two start digging out a ramp as well.
I seen a lot of bad operators in my day but this bunch tops the list.
Rock star hair flip at 3:32 and 3:38...…….LOL
OMG, a real operator would just claw his way up or dig a ramp. WOW just WOW. and they should have a guy in it to run the tracks to help it move.
The comments section just proves how unkind people are to incompetence. One thing is incompetency, but the pride and verbal bashing I see is horseshit. Funny thing is, these youtubers on the comments section I think probably dont know the slightest thing about driving these vehicles.
Why didn't they make a slope with on of the other trackhoes and walk it out? Seems like a lot of waisted time to me. Oh yea and what's with the hippy dude flipping his hair the whole time. You can tell he's the worm of the outfit.
Lower and extend the Arm on top of bank first.Itis all he has to do!Period!Volvo not very strong on traction and hydraulic system.Hitachi Top of the world!!!
Im not too experienced on those machines but wouldnt digging the shore out like i ramp might be a bit smarter??
5 million views and five million folks laughing their asses off at the three ring circus these tadpoles made out of a simple situation.
I've seen lots of Equipment get stuck, and need help to get out. It happens. No big deal. This is NOT one of those situations. The ONLY (polite) comment, I can give this "Operator" - For undermining his own machine, and 'falling' into his own pit, is: " *Lucky you landed upright and aren't hurt. You can pick up your final check tomorrow morning at the Office* ".
Still a few spots not bashed up, better toss it back in the hole and beat it up a bit more!
I couldn't agree more in 11 years as a professional operator (4 as a business owner and no I didn't inherit it) I've never seen such a pathetic excuse for a crew. Must b some kind of government program like DRJP or similar.
Companies that can afford that much late model, high-end equipment wouldn't even hire idiots like that to take out the trash
And these guys are doing deep sewer work with a pumping station. Scary.
Ese maquinista tiene menos cerebro y experiencia en manejo de maquina que él chavo del ocho
A D series Volvo Excavator.Just like ours back home in Malaysia..most Volvos here were D series model
amigos. yo. desbaneseria el terreno para que salga por si sola
Someone was to close to the bank with how wet that material is she gave way and the machine slid down and over she went and the stick cylinder stopped at the bank
Hahahaha that's not a volvo excavator it's a rolvo lol
I've been an operator for 22 years and im wondering...how in the world did this go down lol
Was he digging alongside and the bank gave way? I worked years ago for a company after I just moved to a new area and the bosses son really thought he was something on his new excavator...he sucked big time lol
He was digging with his tracks parallel to the open excavation and at the time i was running a loader and I stopped and gave some friendly advice and suggested he turn his tracks and dig off his idlers and he basically told me to fuck off so I did cos he's the bosses son and I just started and needed a job otherwise id have punched him into the cut....ten minutes later he looked like this guy but upside down...luckily he had the seat belt on and and had the boom up when he went over. Seat belt kept him from falling out and being squashed and boom protected the cab from crushing, other than a crushed pride he was ok. It was great cos he was an asshole...looked good on him. I ended up on a hoe a couple of weeks later and he come up to me one day and apologized and recognized that he should have taken my advice as he saw I knew what i was doing as I'd already at that time been operating for about 15 years. He was much younger than the rest of us but figured his daddy's the boss so I'll treat them like shit. He changed his attitude toward everyone quickly after that...he wasn't so cocky lol
Holy fuckin Jesus he's scraping the back of the machine off the bank how did it go in there in the first place
dribblers the lot of them you ask me
While the machine has use of the hydraulics and 360° that could been made easier by digging out in the first place lol
Awesome Video! This cat is so cute :D Keep up the good work
I've just overturned in my 14tonne volvo yesterday..still bit shocked but nobody got hurt lol