Pittsburgh 3 Ton Low Profile Rapid Pump Floor Jack Harbor Freight Unboxing and Assembly T830018Z
HTML-код
- Опубликовано: 27 апр 2021
- Watch me unbox Harbor Freights Pittsburgh 3 Ton Floor Jack, Plus I show the assembly and how to add hydraulic Jack Fluid. You can get this at Harbor Freight or you can buy it on Amazon by clicking this special Link: amzn.to/2QVIelI
This heavy duty 3 ton car jack gets vehicles almost two feet off the ground. Extra-low profile reaches under most show cars. Dual piston Rapid Pump technology lifts most workloads in just 3-1/2 pumps.
Super-tough precision welded construction with an industrial grade finish
Industrial quality for professional mechanics and hardcore automotive enthusiasts
Rapid Pump® exclusive dual parallel pump system lifts with far fewer pumps
Universal joint release provides precise load control in any handle position
Extra-wide steel casters for stability
Low profile for easy placement under custom vehicles
Van's World is all about "Saving People Time and Money with my How To's and Product Reviews" Grow your RUclips channel with the help of TubeBuddy. www.tubebuddy.com/vansworld
Get your lawn looking great with LawnBright by clicking this special link: bit.ly/3seHVjA And save $20 at checkout by using promo code VANSWORLD20
Struggling with Hair Loss? I use Hair Restoration Laboratories
DHT Blocking Shampoo. Checkout their great deals with this link: hairlossdhtshampoo.com?afmc=50&
Click on this link to shop on Amazon via Van's World: www.amazon.com/shop/vansworld
Click on this link to shop ETSY via Van's World: VansWorld.etsy.com
Contact me at: vans1world@gmail.com
Get your Van's world Merch at TeeSpring
teespring.com/vans-world-mug
teespring.com/vans-world-tee
Disclaimer:
I only recommend products I would use myself and all opinions expressed here are our own. This post may contain affiliate links that at no additional cost to you, I may earn a small commission.
Due to factors beyond the control of Van's World, I cannot guarantee against improper use or unauthorized modifications of this information. Van's World assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Van's World recommends safe practices when working with tools seen or implied in this video. Due to factors beyond the control of Van's World, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Van or Van's World
#productreview 
Хобби
“These instructions suck”
Automatic thumbs up
Your video was exactly what i needed. It is guys like you that make life easier for the rest of us. Thank you
Brother, thank you. Air Force Vet here. You helped my operation.
I bought this exact floor jack last weekend along with daytona 6 ton jack stand at HF. They were on sale. i used this floor kack to do an oil change earlier and it worked as described with no issue at all. It lifted my toyota rav4 with ease. Out of the box the instruction says you need to top off hydraulic oil before use.
do you have to fill it up with oil before use or it just say's that?
I bought the exact jack and it needed hydraulic oil to top off and work properly right out of the box. There were instructions with it on exactly how to do it. When fully filled it lifts a truck with just a few pumps. You could clearly see it barley lifted Vans truck and I believe it needed more oil too. Van thank you for the video as I love my Pittsburgh 3 ton jack and it sure is heavy. That’s good, once it’s on the floor. 🇺🇸👍
@@derfiemcgoo9673 the automotive store has hydraulic Jack oil. Check You Tube for instructions as I don’t recall exactly. It didn’t take more than a couple of ounces to complete the process.
Hello, question, did everythins as you said, it worked 2 times but now has oil leaking… any idea why? And how to fix? Thanks in advance
That’s not good. It shouldn’t leak oil. As I recall I removed the fill plug with the jack down and filled until I could see it at the plug hole threads. If that’s what you did and the plug is tight. It should work Mines still lifting trucks no problems 🤷🏻♂️Sorry your having problems o have pretty good luck with Harbor Freight tools.
Thanks for the review. Finally decided to grab one from Harbor Freight today, still has it for $119 a year later. My old jack wasn't doing it anymore. Any way, you're not kidding about the weight, I know it said 83 lbs, but felt like 100+lbs weight, or maybe i'm just getting old. Advice to all users, every time I use a jack to lift my car, I put the wheels under the carriage in addition to using a floor jack. Just an additional safety measure.
You need to use jack stands too, that’s the most important safety measure, you should only use a jack to lift it, it’s not meant to support it. Just trying to save u brother.
@@parkerfidel6010 I bought a jack and 2 jack stands to do my oil change. Where is it best to put the jack and jack stands?? Should I place the jack in front of the car or on the side??
@@midngthourz9422 you should place your Jack on the front. There are a few places you could put your jacks, but the best place to put it in my opinion is the frame, which is a big thick piece of sturdy metal running along the bottom of your car
@@parkerfidel6010 that’s where I was thinking thanks brother. For the jack stands should I put one on each side of the car or under the actual car??
@@midngthourz9422 yes sir be safe. You need to put one on each side of the car, there should be a frame rail on each side you can put it on. I’d watch a video on how to set it up so you don’t get crushed
Thanks for the instructional part, I thought mine was broken until I found out about the screw underneath.
Got one like this last Christmas and I'm really glad I did. Best floor jack for the money.
I got one too. Works great and need a back brace belt to pick it up
Definitely 😁
Excellent review! I bought one today at Harbor Freight along with four 3-ton jack stands.
If u bleed it right u can get more lift out of each pump on the jack, I unboxed it to day and noticed it didn't work as good as my friends. So I looked up some stuff... just a helpful tid bit
Thank god for you, I’m on the side of the road just bought this last week so it’s it the back i got to set it and the instructions don’t make an sense trying to make you bleed it and need tools I was worried but got on RUclips clicked on this and within 5 min I had the jack working!!! Thanks man!!! Awesome video from the side of the highway 👍🏽 Your right it does weigh 3 tons my back definitely felt it 😂
Finally a guy who gets to the point and is honest. Thanks
Thank you. Received this jack today. The instructions do need revision. Clear they are not. Was having my doubts about this product until I viewed your video. Now, it makes sense.
Thank you
A nice block a wood when needed , the jack is unstoppable
Love this guy ! Could talk with him all day and Crack a cold one 🙏🏻
Thanks. 😁👍
Thank You TWICE... I Got the 2 ton Floor Jack your guidance 🙏 was excellent & exactly what I needed T👀 KNOW! Brother u are a Nobleman & a Squire!!!
Thank u so much buddy. !! Simple well detailed n quick. 🙏
Hey, thank you so much for this awesome video it was exactly what I needed to get my jack out of the box and working! You’re awesome!
I’m glad this video exists, I was confused about the little black clip and didn’t wanna mess up the jack right out the box
Harbor freight is A1 when it comes to tools. I definitely gotta get back over to that candy store for supplies.
Thank you so much for the video! Short, sweet and concise, can’t ask for more than that! Thank you again!
Just watched this video... Having the same exact sentiments...I feel like our spirits are akimbo... Felt like we were having a one on one conversation. THANK YOU so very much for this my friend 🫡
A good and thorough review/demonstration. Hope it's serving you well.
It is!
That square piece of paper you tore off the jack @ 0.52 seconds says; "IMPORTANT! You must check the hydraulic oil level BEFORE using the jack!" (or words to that effect). Otherwise GREAT video! Thank you!
Thanks for your video. I just got one today, and I wanted to make sure I understood everything the same way as someone else.
Thank you sir for this video. Harbor freight has a deal today $120 for this jack & being I have a camaro on 24inch rims & avalanche on 26inch rims I think based on your video I can use this jack to do my oil changes & rotate tires in my garage. My 2 ton just isn't doing it nomore, but having both will definitely work after watching this. Thanks sir.
Glad I could help Hey have you looked at jerky subscriptions? I just subscribed to one that sends different jerky from all over the USA to try. Click this link to check it out. bit.ly/3p8XCZk
Thank You for your comment and for watching
2:14 is what I was looking for as there is no mention of it, thank you so kindly and great video thank you again!!
Thank you man this my first time get this your a RUclips dad💪🏾
Cool, I have a Maasdam jack from Home Depot looks just like yours. My book did not show where fill screw was. You did and I thank you.
Bought exact same one/color yesterday for $99 at HF. It was on sale.
Thanks for the video!
Thanks for the quick video - appreciate it!
No problem. I appreciate you 👍😁
Thank you so much I was struggling for so long and saw this video and it was so simple the instructions didn’t help
Perfect video!!! Short and clear! Thank you!!!
Great video! I purchased the standard sized one yesterday. However now that you showed that the low profile jack can get high enough to lift a truck, im going to go ahead and swap the regular sized one for the low profile one.
@Max Rodriguez I ended up getting the low profile jack many months ago. I love it!!!
Thank you. Was confused there for a second with that screw underneath! 👌
Just what I needed. You’re the best man, thank you.
Bless your soul!! 62 yo granny here trying to 'bleed' the floor jack per the manual I found online without proper diagrams, pathetic! You saved the day! Apparently bleeding it before use is not necessary. I was wondering, wait, I need to first buy hydraulic fluid and top it off before use?? Thought to google youtube and there was this saint from VansWorld! I'll def have to check out your products kind sir! Hoping you have a wonderful life!
Great tutorial, thank you!
I just bought one today I was losing hope till I came across your video thank you bro!
Thanks for demo.
This saved me a lot of trouble. Thanks for making this video 🎉
I was on the fence. Thanks for the info.
Thanks for the review and instructions, it really helps
Your video was spot on. Just picked one up today for a whopping $109.00 😂. The instructions are terrible that come with the unit. I should know because I write aviation mechanical tech data. Awesome thing you did.
You did explained it better than the instruction manual, who's gonna read all that anyway. Thanks a lot.
I just pulled it out of its box thanks for the video!
No problem. I appreciate you taking the time to comment. Enjoy the floor jack. It’s a great investment 😁👍
My issue was the release. Glad you made the video
Thanks for this video. I'm not the sharpest tool in the shed. You helped me alot.
No problem at all. Glad it was what you were looking for. 👍😁
Thank you man just got one today
Saved me a headache. Great video and instructions, the manufacturers are terrible with this stuff 🤣
This was super helpful!
👍😁
Thank you for the help sir!
good review and instructions, thanks
That black plastic piece bent the rod when I didn't realize it was supposed to be taken out
I did the same thing 🤦🏼♂️
great review bud, exactly what i was looking for. just got this becuase ill be woking on 3 cars this nweekend harbor freicght had it for 109
You said “ turn it to the right after you fill the fluid and put the screw back on” I watched 10 videos before I got that piece of information and this was the last video I swore I was watching before I returned this thing thinking it did not work, thanks, no idea why it did not come filled with fluid
Thank you for the help, sir.
Really helped. Thanks!
Two years later and they still dont tell you to take out that plastic shipping piece. Appreciate ya 👍
Yep, i agree. There was NO instruction on that black piece. I had to unscrew 2 screws to get it out, but while trying to be as careful as i could in case something flys at me. While using both hands to pull the black piece off, the handle lunged straight at me and hit my head HARD, like so hard that i thought my head cracked. I think Harbor freight or Pittsburg should be accountable for my injury!
thank you for this video i just got this jack and im about to do my brakes and i wasnt too sure if i should put some oil in it or not thats why i watched this
I had someone comment and say they had to add some hydraulic oil in their new jack. That’s the bad thing about harbor freight. Their quality control sucks. 👍😁
@@VansWorld Its not quality control its the customer. At 54 seconds You ripped the sticker off the jack and didnt read it. It CLEARLY said IMPORTANT!!!! Remove oil plug and top off hydraulic oil and quickly pump handle several times and recheck the level and if correct replace oil plug. Just saying
You got the same 3/8 impact i got. Love that little guy.
Right to the point. Bought one too. Thanks.
Awesome thanks. Enjoy the new jack. I have enjoyed mine.
Very Cool Jack! 😎
😁
Thank you for making this video
😁👍 my pleasure
Excellent video - very helpful
😁👍
Thankyou Van bro that help me out, I was struggling and getting frustrated with it
Glad I could help. Thanks for watching and for taking the time to comment. Have a good one 😁👍
Very good video! Thank you sir!
Thanks for the excellent video. Set me straight.
Thank you for this brother I appreciate ya!
I see all the tire shops have this so I took a chance and got one. I like the low profile status.
Didn't know there was set screw. Appreciate it.
Very informative 👏 👌 👍
thank you for this video!
Good job on the video. Looks good.
Really informative video . Thank you 🙏🏽
Thanks Van!!!!!!
good informational video thanks boss.
Great video, thanks
Thank you!
Thank you for your video. I did not realize I was putting handle in backwards. Agree with you that Instruction manual was poor.
Thanks for the video man it helped a lot
👍😁
Thank you sir very helpful video !
Thanks for the fast and simple video
Your welcome. 😁👍
Great presentation, thank you.
Glad you enjoyed it!
Nice video! grabbed the exact one recently for $108 and didn't notice the bottom screw so that the handle cannot be tightened. almost return it before I saw this video🤣🤣🤣
Thanks for this bro!
No problem buddy
Thank you so much!!!!
Thanks👍
“Man these instructions suck I’m glad I’m making this video”
I’m glad you made it too 🥵‼️💪🏼
😂👍😁
Dude thank you!
Great video
Thank you
Thanks !
Hell yeah thx man 😎
Just bought the same one today here in Detroit. It was $149.99....
Thanks for the instructions !!
Yeah but did you use the $20 coupon?
@@JonathanGrandt I did!!! It went to $129.99
👍😉
Your video is Awesome!! Thanks for a great Work!
Great video, gunna be buying one soon for my car.
thank you
Thank you