I LOVE the 3 ton low profile, long reach. It has the fast foot pump, plus it goes lower and higher than all the other Daytona jacks. It really is a solid piece of equipment and gives me the most versatility out of the bunch.
i put a deflated hot air balloon under my car, lit the propane heater and the car went 20 feet off the ground when the balloon was full then i needed a ladder to rotate the tires.
@@YoungHKim-dk3rg hey mr kim, read roginski thread above about the boulder there are lots of ways to jack up a car. i think it was funny, yu have no sense of humor but jesus still loves you and you will go to the pearly gates of heaven with the lord his holiness jesus christ our savior.
I guess im randomly asking but does anybody know of a trick to get back into an Instagram account..? I somehow lost the login password. I would appreciate any tricks you can give me!
@Turner Kane Thanks so much for your reply. I got to the site on google and I'm trying it out atm. Takes a while so I will reply here later with my results.
I bought the 3-ton low profile long reach jack for myself. It has plenty of weight capacity for my needs, and I know for a fact it will easily go under my mother's 2007 Corolla S and lift my 2002 RAM 1500 Quad Cab 4x4 from the frame rail lickety split. I got it on sale for $179.99, so I was very happy with the price, too.
@@DonnieDarko1They all come in multiple colors. My 3 ton long reach ultra low profile is bright green; I learned not to buy another black jack, after accidentally kicking it or tripping over it numerous times. Bright green and it never happens. I needed the long reach low profile to get under my Porsche 928, yet it works great on my Expedition, too.
I bought the Original Yellow 3 ton for 179.00 3 yrs ago when they were still in the midst of the lawsuit with Snap-On. It was the only one available at that time but prolly would go with the lowest profile 3 ton version today
@@armadillotoe yeah is that the only difference otherwise lift height and reach are very similar i think the original yellow is still better for the extra 20 bucks?
All the jacks at HF are good choices. Me personally i got the 3 ton low pro Pittsburg and its been nothing but great and ive lifted everything from low ass hondas to full size trucks. Great video Justin.
After spending several weeks reviewing the Pros and Cons on the Daytona 3-Ton Low Profile/Long Reach Jack and Daytona 4-Ton Jack and watching your video. I just picked up a Daytona 4-Ton jack in Blue for $199 at Harbor Freight. ($239 - $40 coupon). I like the fact that the Daytona 4-Ton also has ZERK fittings for the front wheels just like the 3-Ton Super Duty. Will be using this for my current Toyota Tundra and soon to be Ford F250 Turbo Diesel!!
I think this is an excellent choice and will fit a wide range as you have shown. Doesn’t this come with grease zerk too! Anyway. Good choice, good demo! I went with the 3 ton Pittsburgh Automotive lightweight 67 lbs vs 100 lbs Daytona 4 ton as I am twice as old as you and only work on my stuff. Not like I am going to be pushing the jack all over the place but if I need to load it up to take with me, every pound saved helps us senior citizens! Thanks for sharing!
Yes , all the Harbor Freight Datona floor jacks will roll over zip ties that are laying on the floor. The front wheels on all Dayona floor jacks have curved wheels (inside of the front wheels to the outside of each front wheel]. Most all floor jacks don't have curved front wheels but have flat front wheels. Gregg Muse
If I had to make the choice. I would have went for the 3 ton long reach low profile. Though the lowest height is marginal but sometimes just a half inch can make a difference. What I do like is the higher 24inches. Works real well with the 6 ton Jack stands. And when I am working on the ground under a vehicle. It is nice to have that extra room without having to raise it in multiple stages to get the height I need. That is my own opinion. You may not need that aspect of it. I do.
When you're in a tight spot I've come to find that it's actually safer to have a few pieces of wood that are large enough to put underneath the jack rather than on the jack itself. This is definitely far more stable but can still be a bit hairy
You should have gotten the Daytona 3-ton, low-profile & extended reach for $25 more. It has the foot pump to quickly set the saddle on the frame rail, plus it gives you an added 4-inches of lift.
If you are going to be lifting heavier duty trucks with it I'd get the 4 ton. For most people however, the 3 ton low profile long reach is the best option. Has the foot pedal for when you don't want to pump it by hand 24/7 and can reach good jacking points easier than the regular one, especially if your pinch welds are rotted away and you can't use them.
Good topic and video. I'm considering the 3ton lowest profile with the long reach, and foot pump feature. These never go on sale, however... I am also now considering the one you got! 4 tons is no joke! Thank you Justin! 👍
Reminds me when I was young and dumb. Worked at a tire store that had the singe post in ground Rotary lifts. In order do lift a full size dodge van without the center post hitting the drive shaft we would use a 4x4 about 6 inches long on each side of the rear. Looking back lifting those without proper truck adapters was really dumb. I thank the Good Lord that He watched over me!
The 4 ton is now the same price as the 3 ton low profile long reach, making the 3 ton low profile long reach the obvious choice. Or better yet, save $60 and just get the 3 ton low profile. While the long reach might seem insignificant, it does allow the jack to go higher, which is important for many. No more using wood blocks to get that extra height. And check out the Pittsburgh branded jacks, which are practically identical to these new multi colored daytonas for less coin
Best one is the long reach jack that was 199 in the vid with the footpedal. Has a long reach and max height of 24 inches. Harbor freight had it on sale for 179.99 plus there was a 20$ off coupon .
Thanks for the videos. I was leaning towards the low profile long reach one until I saw this. For the time being I'm using the Pittsburgh low profile heavy duty. Works well. 2 and 7/8th to about 19 inches. Only paid 79 dollars with coupon last year
Great review! I've been debating which one to get for a few weeks now. I recommend checking the hydraulic fluid level and then bleeding the hydraulics to get the air out of the system. You'll most likely get a more lift travel with each pump. Air is compressible and no good for hydro systems.
I really like my yellow Daytona 3-ton super-duty professional floor jack the past couple years and like seeing your comparison of them. Thanks for the video and exhibition!
@@abrahamestrada2206 I’ve had the yellow 3-ton for over 3 years and it’s featured in a number of my videos on my channel and it’s been a 💯 solid performer!
Have you examined these to see if you can find a quality difference in design, thickness of sheet, wheels, etc.? Or is there just a slight size difference and capacity? Great demo!
Great video, I have the long reach low profile and is great when you have to support rear differential, engine and trannny when changing motor mounts and need that extra reach under the vehicle, instead of crawling underneath the truck to find the jack.
Hey Justin, my names Gregg. Just finished watching your video on you deciding to purchase your Harbor Freight 4ton extrem green Daytona floor jack. You ask the question, if we thought you chose the right floor jack. Really just a couple of 3 things that you need to consider when making that decision. #1: Cost How much can you afford to spend on a floor jack? #2: What is your intended use for this new floor jack? Are you going to be working on just your 2 car & that's all? Or are you doing side jobs @ night & on weekends? Or are you taking it to a full blown garage. Also what type vehicles are you going to be lifting (low ground clearance vehicles, pickup truck, 4x4's)? #3: Last but not least, warranty. I could be mistaken but I believe 1yr is the longest warranty any of the Daytona floor jacks have except for the YELLOW Daytona Supper Duty 3ton floor jack which has a 3yr warranty. That's the same jack that Snap-on tried taking them to court on copyright infringement. Snap-on didn't win. Thank you for your channel. Gregg Muse
Nice jack! I picked up the low profile 3 ton model with the 20" lift a little bit ago and freakin love the thing. I used to have to do the 2X4 on my trolley jack like you talked about to get my big ol Durango off the ground. The Daytona lifts it higher than I even need to go with ease. I don't know why anybody would be disappointed with these jacks.
I bought my current jack almost 40 years ago before there were Harbor Freight stores, from a store that sold imported tools. It's a Chinese heavy duty jack, & just needs new seals. It's done everything ive asked of it over the years. But the identification label is long gone, and finding the right seal kit near impossible. I paid $55, which, adjusted for inflation is around $150. So the 3 ton on sale looks like the best fit for my needs. Nothing I own weighs 8000 lbs. Because they're low profile, a wood block can be usually be added, giving the jack extra lift distance.
i will be buying the long reach soon, i have the older pittsburgh 2 ton long reach been a great jack, 4 inches is 4 inches i have lifted junk and i need all the height i can get.
Nice video brother, you should have gotten the one with the foot pump, makes it easier to start and way faster too, but it's still a badass floor Jack, you take care and its Beer friday.....!
Actually it's 90 days. Most everything there is 90 days. Except for most hand tools which are lifetime. And of course the yellow super duty Daytona which is three.
Just bought a 4-ton after watching this video and the other one on Daytona floor jack. I think the 4-ton is a better value as you said it. I got 6 lbs truck and 6 lbs travel trailer. The 4-ton works better. The 3-ton is too light for me.
For a corner. 3 and 4 ton jacks should breeze through most things. The yellow jack is superior because its hydraulic systems are much better. Meaning it will hold your shit up for a week with no drop. These other jacks wont do that.
I used this many times on my 2020 ram 3500 dually…. Works great. Bought a second one because…. Well you know. How many “whatever” do you need? Just one more😜
I know this video is older and I know people are talking about inflation but as of right now, at least in my area this jack right here it’s on sale for $169 with a coupon! Originally $240! So go out and go get one while you can!
What value could we place on the super-duty? I’m shopping now, and wondering if super duty might translate to better quality (less chance of it breaking down)? Or do floor jacks tend to be trouble free anyway, so super duty would be meaningless outside of a busy shop? One of the things I hate about my old jack is when you try to lower it down onto the jackstands, it always comes crashing down (there is no slow).
I have a quick jack that I bought from Harbor Freight with the quick pedal in the back. It does meet the frame quicker, however because of the lift rate, it is hard to jack up if you are lifting a heavier vehicle. I don’t see that jack offered anything from Harbor Freight. For smaller cars it’s great, not so much for full size cars, or trucks. The jack that you’re showing looks to be better than the one that I purchased, for heavier vehicles.
Like the enthousiasm and recognize the efforts. Question: Why not buy the "Racing" [aluminum] version? 3ton seems to be close to the same $ as the 4T steel version and 40 pounds lighter. I would think anyone with anything less than a 1ton could go with the 3 or 2.5 easily.
Great topic, I do need to purchase a floor jack soon. I had been wanting a green one to match my green tool cart but the Daytona green looks different/brighter than the US General green. I need to re-think my life now.
I bought one recently and can say I noticed the low profile one is worse imo as it only goes about an inch lower where i cannot fathom a situation where the regular 3 ton daytona wouldn't fit but secondly the low profile one pumps up about 30-40% slower and for anyone who regularly works under a car you know this is the biggest factor in buying these lifts.
Which one would you recommend for a DIYer doing routine maintenance like rotating the tires and oil changes? I am still bummed you're not a neighbor😍😀 Thanks Justin once again for sharing your thoughts and videos, Rodney
@@JustinDowDIYcentralhighway Thanks. I usually set the Jack at the welds but maybe I’ll start jacking from a different spot so the stands can go where the pinch welds are. Thanks for a great video with energy and isn’t boring like many others.
Did you add hydraulic fluid? if not, the reservoir is probably mostly empty making the rapid pumping not as effective as it should be. It was clear that your pumping action range was very limited.
I recommend putting Harbor Freight Coupons App on your phone, it's 3rd party, NOT the official HF APP.. every coupon in US updated constantly, "add to cart" all the coupons you want including your free item, they scan your phone, never cut a coupon again! (I'm not affiliated lol)
My Craftsman 2T floor jack I got back in ‘96 finally broke. I had to get a new one so I got the green NASCAR 3T jack. I hope it’s good. The Craftsman one was great for my Ford Taurus back when I bought it but not high enough for my 2 classic Mercedes or the Nissan Frontier. I’m hoping the green one will lift high enough.
Justin Aren't you suppose to purge these before first use. Also doesn't the yellow one have a longer warranty. The reason they're a tad more expensive?
the yellow 3 ton is a best jack rated by project farm the larger wheels make jack work much better. also has grease fittings on wheels and all the pivot points
Nope. Pinch weld should hold up and it's under the car where you'll never see it so if it gets a little scratched or dented oh well. nature of the game. Not going to see it anyway. Cheers!
If it’s designed to be the lift point for the vehicle then the pinch weld will usually hold it. Now if the pinch weld is completely rotted out (Chevy Venture & Nissan Sentra) come to mind you have bigger issues like your car folding in half if you get hit hard.
Nothing wrong with the Pittsburgh's I've got a pair here at the house & I have a pair of Durlast under a Honda Civic which has been under it for almost 2 years it feels like. lol
How about them recalls on the the Pittsburgh jacks? I'm not convinced they fail, I think its mainly operator error. Either way I bought a pair of jack stands from Napa for $26
Thanks for the video Justin....I'm thinking about getting that 4 ton myself.... what do you (or any of your viewers) think about the HF Aluminum jacks? .... I also need a jack for transporting in my truck.
Justin quick question bruh.? Daytonas worth the premium price? Compared idk lets say a 70 dllr husky or craftsman etc. I really need a new jack since my last got stolen lol.
Someone did a review on a lot of different jacks. Left it under load for a week. The only jacks that didnt move were the yellow and the snapon that HF got sued for.
Trying to choose between the 3 ton super duty and the 3 ton low profile long reach. Even the base model 3 ton would be good enough for what i need but id like to get somthing a bit more capable for down the road
Justin since you have a relationship with harbor freight maybe you can answer this question. Is it true that the yellow 3 ton Daytona Jack is built to a higher standard than the rest of the Daytona Jack’s??? I’m sure everyone would like to know and It can guide our purchases better.
You said you paid 179$? I was about to get one last week but the price was 219 I think. Did you get yours on sale. Thanks for sharing. This vid helped me a lot to make a decision
Damn yo, inflation really hit hard. Can’t believe these were that cheap only 3 years ago.
Seriously, I was thinking exactly the same thing ... shit's sad
Yep. But no mean tweets is worth it I keep being told
209.99 vs 289.99 in 5 years for the super duty
I LOVE the 3 ton low profile, long reach. It has the fast foot pump, plus it goes lower and higher than all the other Daytona jacks. It really is a solid piece of equipment and gives me the most versatility out of the bunch.
I’m due for a new jack, my current ones about 12yrs old. The long reach, low profiles the exact one I’m thinking I’ll get.
@@XAnonymousGuyX1did you get it cause I just picked up one today and am gonna be using this week
Exactly reasons for my purchase. 👍
Yep I just bought the low profile long reach last week. It's great!
I lift the car with my hands then kick a huge boulder under it.
a toy car k
i put a deflated hot air balloon under my car, lit the propane heater and the car went 20 feet off the ground when the balloon was full then i needed a ladder to rotate the tires.
@@vermbird8393 Quit trolling bro.... you are not funny either.
@@YoungHKim-dk3rg hey mr kim, read roginski thread above about the boulder there are lots of ways to jack up a car. i think it was funny, yu have no sense of humor but jesus still loves you and you will go to the pearly gates of heaven with the lord his holiness jesus christ our savior.
that’s because you’re just built different, like myself
Great review! I thought I was the only person that gets this excited about floor jacks now I know I’m not alone! 🤣🤣🤣🤣
I guess im randomly asking but does anybody know of a trick to get back into an Instagram account..?
I somehow lost the login password. I would appreciate any tricks you can give me!
@Joel Thiago Instablaster ;)
@Turner Kane Thanks so much for your reply. I got to the site on google and I'm trying it out atm.
Takes a while so I will reply here later with my results.
@Turner Kane it did the trick and I now got access to my account again. Im so happy!
Thank you so much, you saved my account :D
@Joel Thiago No problem :D
Every mechanic needs & respects an awsome jack like this one
Great review mate
I bought the 3-ton low profile long reach jack for myself. It has plenty of weight capacity for my needs, and I know for a fact it will easily go under my mother's 2007 Corolla S and lift my 2002 RAM 1500 Quad Cab 4x4 from the frame rail lickety split. I got it on sale for $179.99, so I was very happy with the price, too.
This is exactly what I was thinking about, finding convenient storage and portability solution, thought they'd all be too big.
Was it the red one?
@@DonnieDarko1They all come in multiple colors. My 3 ton long reach ultra low profile is bright green; I learned not to buy another black jack, after accidentally kicking it or tripping over it numerous times. Bright green and it never happens. I needed the long reach low profile to get under my Porsche 928, yet it works great on my Expedition, too.
I bought the Original Yellow 3 ton for 179.00 3 yrs ago when they were still in the midst of the lawsuit with Snap-On. It was the only one available at that time but prolly would go with the lowest profile 3 ton version today
It would be difficult to give up the 3-year warranty with the original jack.
Lawsuit was dropped when it was found that the Chinese manufacturer made both jacks in the same factory! Chevy or GMC -- it's the same. Go figure.
@@armadillotoe yeah is that the only difference otherwise lift height and reach are very similar i think the original yellow is still better for the extra 20 bucks?
Why does Prolly prefer the low profile one.? I think I have the low profile model ("yellow").
“How about that “ with the mechanic pose right after 🕺🏽 😂 awesome video 🤟🏾
All the jacks at HF are good choices. Me personally i got the 3 ton low pro Pittsburg and its been nothing but great and ive lifted everything from low ass hondas to full size trucks. Great video Justin.
I just purchased the same jack. Follow the setup instructions and it's a hella good jack for $97
Yep, I got the Pittsburgh Pro 3 Ton low profile for around $90 last year and it works great.
After spending several weeks reviewing the Pros and Cons on the Daytona 3-Ton Low Profile/Long Reach Jack and Daytona 4-Ton Jack and watching your video. I just picked up a Daytona 4-Ton jack in Blue for $199 at Harbor Freight. ($239 - $40 coupon). I like the fact that the Daytona 4-Ton also has ZERK fittings for the front wheels just like the 3-Ton Super Duty. Will be using this for my current Toyota Tundra and soon to be Ford F250 Turbo Diesel!!
I think this is an excellent choice and will fit a wide range as you have shown. Doesn’t this come with grease zerk too! Anyway. Good choice, good demo! I went with the 3 ton Pittsburgh Automotive lightweight 67 lbs vs 100 lbs Daytona 4 ton as I am twice as old as you and only work on my stuff. Not like I am going to be pushing the jack all over the place but if I need to load it up to take with me, every pound saved helps us senior citizens! Thanks for sharing!
But will it roll over a zip tie🤔🤔🤔🤔🤔
lmao!!
No. I have one of these and it will not roll over a zip tie
Hahaha! Good way to eat the handle!
😀🤣🤣🤣🤣🤣😀🤣🤣🤣
Yes , all the Harbor Freight Datona floor jacks will roll over zip ties that are laying on the floor. The front wheels on all Dayona floor jacks have curved wheels (inside of the front wheels to the outside of each front wheel]. Most all floor jacks don't have curved front wheels but have flat front wheels.
Gregg Muse
If I had to make the choice. I would have went for the 3 ton long reach low profile. Though the lowest height is marginal but sometimes just a half inch can make a difference. What I do like is the higher 24inches. Works real well with the 6 ton Jack stands. And when I am working on the ground under a vehicle. It is nice to have that extra room without having to raise it in multiple stages to get the height I need. That is my own opinion. You may not need that aspect of it. I do.
Its crazy, these jacks are 20% higher price in 2024
When you're in a tight spot I've come to find that it's actually safer to have a few pieces of wood that are large enough to put underneath the jack rather than on the jack itself. This is definitely far more stable but can still be a bit hairy
I always thought that the wood was to prevent wearing. So it wouldn't be metal on metal.
You should have gotten the Daytona 3-ton, low-profile & extended reach for $25 more. It has the foot pump to quickly set the saddle on the frame rail, plus it gives you an added 4-inches of lift.
This might be good for my Vette. Weight lift for me is not as important as long reach and low clearance.🤔
Just bought it my lowered car was the deciding factor. It's a huge jack though, and heavy.
If you are going to be lifting heavier duty trucks with it I'd get the 4 ton. For most people however, the 3 ton low profile long reach is the best option. Has the foot pedal for when you don't want to pump it by hand 24/7 and can reach good jacking points easier than the regular one, especially if your pinch welds are rotted away and you can't use them.
Hello, I’m from the future (2023) the price of the 4ton model is $240 at harbor freight😩.
180$ now with itc membership
@@julioocampo9755$144 tomorrow only (40% off)?
In my area, the same Jack is on site with a coupon for $169!!!!! compared to $240
Good topic and video. I'm considering the 3ton lowest profile with the long reach, and foot pump feature. These never go on sale, however... I am also now considering the one you got! 4 tons is no joke! Thank you Justin! 👍
We will ignore you told us about the wood thing.... but we’re all still gonna do it anyway🤣
lmao!!!!
Reminds me when I was young and dumb. Worked at a tire store that had the singe post in ground Rotary lifts. In order do lift a full size dodge van without the center post hitting the drive shaft we would use a 4x4 about 6 inches long on each side of the rear. Looking back lifting those without proper truck adapters was really dumb. I thank the Good Lord that He watched over me!
Love the enthusiasm! Great review man!!
The 4 ton is now the same price as the 3 ton low profile long reach, making the 3 ton low profile long reach the obvious choice. Or better yet, save $60 and just get the 3 ton low profile. While the long reach might seem insignificant, it does allow the jack to go higher, which is important for many. No more using wood blocks to get that extra height. And check out the Pittsburgh branded jacks, which are practically identical to these new multi colored daytonas for less coin
I got the 3 ton super duty. It will outlast all the other ones there.
Best one is the long reach jack that was 199 in the vid with the footpedal. Has a long reach and max height of 24 inches. Harbor freight had it on sale for 179.99 plus there was a 20$ off coupon .
Thanks Dow I'm gonna have to pick me up one, glad I waited now.
Thanks for the videos. I was leaning towards the low profile long reach one until I saw this. For the time being I'm using the Pittsburgh low profile heavy duty. Works well. 2 and 7/8th to about 19 inches. Only paid 79 dollars with coupon last year
Nice!
Great review! I've been debating which one to get for a few weeks now. I recommend checking the hydraulic fluid level and then bleeding the hydraulics to get the air out of the system. You'll most likely get a more lift travel with each pump. Air is compressible and no good for hydro systems.
Good to know. I love it here Sometimes
I really like my yellow Daytona 3-ton super-duty professional floor jack the past couple years and like seeing your comparison of them. Thanks for the video and exhibition!
my dad is thinking of buying the orange one. how has it treated you so far?
@@abrahamestrada2206 I’ve had the yellow 3-ton for over 3 years and it’s featured in a number of my videos on my channel and it’s been a 💯 solid performer!
@@WorksIRL that's great to hear!
Have you examined these to see if you can find a quality difference in design, thickness of sheet, wheels, etc.? Or is there just a slight size difference and capacity?
Great demo!
“U know what ignore what I even told u about the wood thing” I love this shit !!! Getting making videos Justin !!!!
Keep*
We already know about the wood thing. Just don't crawl underneath anything unless you have at least two methods of support.
I definitely want one in that green pretty ...like sublime green 👍
Logic sounds good to me.
Good info, thanks for the video!!! 👍🏻🇺🇸
Great video, I have the long reach low profile and is great when you have to support rear differential, engine and trannny when changing motor mounts and need that extra reach under the vehicle, instead of crawling underneath the truck to find the jack.
Hey Justin, my names Gregg. Just finished watching your video on you deciding to purchase your Harbor Freight 4ton extrem green Daytona floor jack. You ask the question, if we thought you chose the right floor jack. Really just a couple of 3 things that you need to consider when making that decision. #1: Cost How much can you afford to spend on a floor jack? #2: What is your intended use for this new floor jack? Are you going to be working on just your 2 car & that's all? Or are you doing side jobs @ night & on weekends? Or are you taking it to a full blown garage. Also what type vehicles are you going to be lifting (low ground clearance vehicles, pickup truck, 4x4's)? #3: Last but not least, warranty. I could be mistaken but I believe 1yr is the longest warranty any of the Daytona floor jacks have except for the YELLOW Daytona Supper Duty 3ton floor jack which has a 3yr warranty. That's the same jack that Snap-on tried taking them to court on copyright infringement. Snap-on didn't win. Thank you for your channel. Gregg Muse
What's a good jack for a beginner, doing oil changes and brakes?
(2012 Vw New Beetle 2.5) Thanks
Great video! Thank you. Definitely helping me make the right decision.
Why is this so funny. Lol I subscribed and haven’t even clicked on your page lol
Nice jack! I picked up the low profile 3 ton model with the 20" lift a little bit ago and freakin love the thing. I used to have to do the 2X4 on my trolley jack like you talked about to get my big ol Durango off the ground. The Daytona lifts it higher than I even need to go with ease. I don't know why anybody would be disappointed with these jacks.
I bought my current jack almost 40 years ago before there were Harbor Freight stores, from a store that sold imported tools. It's a Chinese heavy duty jack, & just needs new seals. It's done everything ive asked of it over the years. But the identification label is long gone, and finding the right seal kit near impossible. I paid $55, which, adjusted for inflation is around $150. So the 3 ton on sale looks like the best fit for my needs. Nothing I own weighs 8000 lbs.
Because they're low profile, a wood block can be usually be added, giving the jack extra lift distance.
Good job..Daytona the best looking jack..looks solid
Damn!!! I was just about to comment on the 5 years ago prices to 2024 prices... But the person under me already did!
I would have liked to have seen the tire flat (deflated) to see if the low profile jack was low enough.
Great video. Thanks 😊
i will be buying the long reach soon, i have the older pittsburgh 2 ton long reach been a great jack, 4 inches is 4 inches i have lifted junk and i need all the height i can get.
There's a recall on jack stand of harbor frieght. And I would like to say dont forget to put hydrolic fluid in floor jack.
I just picked up the 3 ton super duty, I saw they manufacture it in the same facility as the snap on one
Nice video brother, you should have gotten the one with the foot pump, makes it easier to start and way faster too, but it's still a badass floor Jack, you take care and its Beer friday.....!
Awesome job justin you wont be dissatisfied!! I went with the 3 ton green low profile 👍
Just bought one used 3 ton green low profile for 100 and I geeked love it
The only reason I think I would go with the Super Duty over the rest is it has a 3 year warranty. I think the rest are only one year.
Actually it's 90 days. Most everything there is 90 days. Except for most hand tools which are lifetime. And of course the yellow super duty Daytona which is three.
Yep my super duty has 3yr ... Impressed
Just bought a 4-ton after watching this video and the other one on Daytona floor jack. I think the 4-ton is a better value as you said it. I got 6 lbs truck and 6 lbs travel trailer. The 4-ton works better. The 3-ton is too light for me.
How come you didn't compare it to the 3 ton professional jack that harbor freight compared to snap on jack?
For a corner. 3 and 4 ton jacks should breeze through most things. The yellow jack is superior because its hydraulic systems are much better. Meaning it will hold your shit up for a week with no drop. These other jacks wont do that.
I think it has a proper warranty as well not just the Hf 90 days
Just bought the yellow daytona, so far impressed
@Jeff Perters I think i used discounts and got for $179
This video helped me out. Going to get me a Jack.
I ended getting the long reach for 199 could not use coupons, looks like a good jack, but you need a jack to lift this jack up, real heavy
I just wrestled with one today. Got it into my car but it wasn't easy with a rolling shopping cart
I used this many times on my 2020 ram 3500 dually….
Works great. Bought a second one because…. Well you know. How many “whatever” do you need? Just one more😜
I know this video is older and I know people are talking about inflation but as of right now, at least in my area this jack right here it’s on sale for $169 with a coupon! Originally $240! So go out and go get one while you can!
What value could we place on the super-duty? I’m shopping now, and wondering if super duty might translate to better quality (less chance of it breaking down)? Or do floor jacks tend to be trouble free anyway, so super duty would be meaningless outside of a busy shop? One of the things I hate about my old jack is when you try to lower it down onto the jackstands, it always comes crashing down (there is no slow).
I just bought a 1.5 ton pittsburgh, I hope it holds up better than the jack stands lol
I have a quick jack that I bought from Harbor Freight with the quick pedal in the back. It does meet the frame quicker, however because of the lift rate, it is hard to jack up if you are lifting a heavier vehicle. I don’t see that jack offered anything from Harbor Freight. For smaller cars it’s great, not so much for full size cars, or trucks.
The jack that you’re showing looks to be better than the one that I purchased, for heavier vehicles.
Like the enthousiasm and recognize the efforts. Question: Why not buy the "Racing" [aluminum] version? 3ton seems to be close to the same $ as the 4T steel version and 40 pounds lighter. I would think anyone with anything less than a 1ton could go with the 3 or 2.5 easily.
Thought you purchased the Black one? What about going from the front of the car?
Thanks for the video i bought the same one after watching the comparison
Great topic, I do need to purchase a floor jack soon. I had been wanting a green one to match my green tool cart but the Daytona green looks different/brighter than the US General green. I need to re-think my life now.
The black may not clash too much with the green
Dough. Another massive setback. (know what you mean)
They’re close enough in most light you’ll never notice
Thats funny right there what you said🤣🤣🤣🤣🤣🤣👍👍
But will the GREEN jack clash with your shoes?
I bought one recently and can say I noticed the low profile one is worse imo as it only goes about an inch lower where i cannot fathom a situation where the regular 3 ton daytona wouldn't fit but secondly the low profile one pumps up about 30-40% slower and for anyone who regularly works under a car you know this is the biggest factor in buying these lifts.
Which one would you recommend for a DIYer doing routine maintenance like rotating the tires and oil changes? I am still bummed you're not a neighbor😍😀 Thanks Justin once again for sharing your thoughts and videos, Rodney
Rodney Widger I’d recommend the same one in this video. It’s overall perfect for most anything you’ll run into car, SUV, or Truck 👍
On that Jetta, where do you place Jack stands?
Pintch welds that run along the seem of the body. sometimes you might see a hard plastic piece under Neath. That's a good spot too
@@JustinDowDIYcentralhighway Thanks. I usually set the Jack at the welds but maybe I’ll start jacking from a different spot so the stands can go where the pinch welds are. Thanks for a great video with energy and isn’t boring like many others.
Really enjoy your videos man!
I appreciate that! Cheers!
I bought that low profile jack a few months ago and it for surely has some weight to it
Did you add hydraulic fluid? if not, the reservoir is probably mostly empty making the rapid pumping not as effective as it should be. It was clear that your pumping action range was very limited.
I recommend putting Harbor Freight Coupons App on your phone, it's 3rd party, NOT the official HF APP.. every coupon in US updated constantly, "add to cart" all the coupons you want including your free item, they scan your phone, never cut a coupon again! (I'm not affiliated lol)
I can’t find that app but thanks for the advice
I purchased 3 ton low profile. 9 months later after very little use it stopped working.
I have the exact same Jack. Wish it had a little bigger wheels as it gets caught up on everything and won’t roll. Love mine
What's a good jack for a beginner? Just for oil changes and brakes.
(2012 VW New Beetle)
Thanks
Beautiful jacks that I wouldn't even want to put them to work cause they'll get scratched.
My Craftsman 2T floor jack I got back in ‘96 finally broke. I had to get a new one so I got the green NASCAR 3T jack. I hope it’s good. The Craftsman one was great for my Ford Taurus back when I bought it but not high enough for my 2 classic Mercedes or the Nissan Frontier. I’m hoping the green one will lift high enough.
PLEASE TELL US how they hold up over time?
Justin
Aren't you suppose to purge these before first use. Also doesn't the yellow one have a longer warranty. The reason they're a tad more expensive?
I got the Standard low profile 3ton, and its very loud rolling it around in my quiet neighborhood
Just bought mine. It works great
the yellow 3 ton is a best jack rated by project farm the larger wheels make jack work much better. also has grease fittings on wheels and all the pivot points
What do you do when you jack at the pinch weld? Use a special slotted pad?
Nope. Pinch weld should hold up and it's under the car where you'll never see it so if it gets a little scratched or dented oh well. nature of the game. Not going to see it anyway. Cheers!
If it’s designed to be the lift point for the vehicle then the pinch weld will usually hold it. Now if the pinch weld is completely rotted out (Chevy Venture & Nissan Sentra) come to mind you have bigger issues like your car folding in half if you get hit hard.
Just got a super duty 3ton ... Came with 3yr warranty
Thx for doing this review. Iam looking for a jack. On the used Jack's, what can one look for to check if it's ok. Any recommendations on jack stands
Nothing wrong with the Pittsburgh's I've got a pair here at the house & I have a pair of Durlast under a Honda Civic which has been under it for almost 2 years it feels like. lol
I picked up a nice set at the good ole harbor freight 6 ton....with coupon...40 dollars. Great comfort while working on the van.
How about them recalls on the the Pittsburgh jacks? I'm not convinced they fail, I think its mainly operator error. Either way I bought a pair of jack stands from Napa for $26
The lack of grease fittings was a deal breaker. Had to go the model up
The 4 ton does have grease fittings.
I like this guy humor.
What would you recommend for 1997 dodge ram 2500 because its naturally taller then most trucks
Thanks for the video Justin....I'm thinking about getting that 4 ton myself.... what do you (or any of your viewers) think about the HF Aluminum jacks? .... I also need a jack for transporting in my truck.
Not rapid pump rapid pump goes all the way up in three or four pumps
How heavy is this? Im looking for A jack I can keep in my truck for emergency's like flat tires.
It’s about 104 pounds looking at the specifications from Harbor freight, she’s definitely a heavy one!
Justin quick question bruh.?
Daytonas worth the premium price?
Compared idk lets say a 70 dllr husky or craftsman etc.
I really need a new jack since my last got stolen lol.
Someone did a review on a lot of different jacks. Left it under load for a week. The only jacks that didnt move were the yellow and the snapon that HF got sued for.
I could be wrong but don’t you have to bleed the hydraulics when you buy one of those. Just a thought. Thanks for making the video.
milkcrate919 I heard no with the new ones
Trying to choose between the 3 ton super duty and the 3 ton low profile long reach. Even the base model 3 ton would be good enough for what i need but id like to get somthing a bit more capable for down the road
Pittsburgh 3 ton low profile / rapid pump for me. Got it on liquidation for 95.00. It’s just as good
Justin since you have a relationship with harbor freight maybe you can answer this question. Is it true that the yellow 3 ton Daytona Jack is built to a higher standard than the rest of the Daytona Jack’s??? I’m sure everyone would like to know and It can guide our purchases better.
The 3 ton low profile long reach has a foot pedal and the Daytona 3 ton yellow jack has a 3yr warranty that comes with it.
How the hell did you get your mic to sound so good outside
“You know what, ignore I told you about the wood thing.”
😆
Todd Stewart 😂😂😂🍻👍
There's a saying in the legal profession when the jury hears something and the judge tells them to ignore it: you can't unring that bell
🙌🏼
😂
Wha jack stands do you use?
I got the 3 ton for my Camaro SS, things great.....
You said you paid 179$? I was about to get one last week but the price was 219 I think.
Did you get yours on sale. Thanks for sharing. This vid helped me a lot to make a decision