Coolant topup in Dominar 400 BS6 | Motul ingel Expert Coolant | Motul coolant topup

COOLANT TOP UP IN MY DOMINAR 400 BS6
To top up the coolant in your Dominar 400 with Motul Inugel Expert, please follow these steps:
Make sure the engine is cool before beginning. Attempting to add coolant to a hot engine can be dangerous.
Locate the coolant reservoir, which is typically a white plastic tank located near the engine. It should have "MAX" and "MIN" markings on the side.
Unscrew the coolant reservoir cap and set it aside. Be careful not to spill any coolant.
Check the level of the coolant in the reservoir. If it is below the "MIN" marking, you will need to add more coolant.
Shake the bottle of Motul Inugel Expert well before opening it.
Slowly pour the coolant into the reservoir until it reaches the "MAX" marking. Be careful not to overfill.
Once the coolant level is correct, replace the reservoir cap and tighten it securely.
Start the engine and let it idle for a few minutes. This will help circulate the new coolant throughout the engine.
Check the coolant level again after the engine has cooled down. If it is below the "MIN" marking, you may need to add more coolant.
Please note that it's important to use the correct type of coolant for your motorcycle, as specified by the manufacturer. Motul Inugel Expert is a high-performance coolant designed for use in motorcycles. It provides excellent thermal stability.

[@utpalkant6165]

Nice bike 👍

[@HEROgamer8085]

Kithe ml hua top up approx batao

[@fuzailmirza]

side me minimum & maximum sign dekh k top up kiya tha