How Much it Cost to Manual Swap My E36 + Parts List
HTML-код
- Опубликовано: 10 фев 2025
- In this video we broke down all the parts used (and cost) on our recent manual swap of our M50B25 e36 convertible. Overall, it wasn't a cheap exercise but very necessary to address a lot of maintenance item while we were there.
OEM parts mentioned with part numbers:
23701136498 - Gearbox cross member
25117580281 - Shifter rod joint
21526773670 - E46 clutch master cylinder
21521159045 - Clutch slave
21511223302 - Clutch fork
21511223302 - Clutch pivot pin clip
11142249533 - Rear main seal
11141432240 - Rear seal gasket
26111227869 - Guibo
Follow my socials to stay up to date with the builds:
Tok: www.tiktok.com...
Insta: ...
My camera set up
Gopro: amzn.to/3kI05vK
Media mod: amzn.to/3SGwlMh
Accessories: amzn.to/3kI0tdG
Tripod: amzn.to/3SG8JHH
Lighting: amzn.to/3oPdx31
Camera light: amzn.to/42ys150
Those prices are crazy! I'm in the Caribbean and I bought a full gearbox swap for 300 pounds and bought the throwout, pilot, pivot pin, and fork retrainer from ecstuning, and buying shifter bushings from garagistic. Everything under like $600-800 usd lol
Yeah Australia is a bit expensive, supply and demand 😑 still wouldn’t have it any other way, I love the e36 😎
You got all the parts for that much?you have the link?
Perfect video, Ive been searching for a while and this is all the info I needed, explained very well, Australian prices and calipso red gang. Instant sub take my money and teach me your ways lol
Thanks dude! Glad I could help out ☺️
The price is crazy !!! i got my manual swap whit zf320 for 500 euro ... the money you paid for the trans swap is the price i paid for my 328ia touring back in 2019
If only we could build a Time Machine 😎
Great breakdown! I'm planning on swapping my e36 in the future, as for prices it's pretty spot on with the california market 😅
Thanks dude, good luck on your swap! Yeah pricing worldwide can vary I’m surprised it’s spot on with California tho 😎
You could almost get two whole road legal e36 for that price in Finland. Those parts would cost 500€ used including new clutch set. Used Getrag with shifter assembly 50e, used whole driveshaft 50e, used stock or new short shifter and new bushings 50-80e, used pedal and clutch cylinder 30e. And everything else would fit in the 500€
Yeah wow, I am very jealous! Australia is pretty expensive however, its still one of the cheapest good drift chassis to get into over here
nice info , have you done the calculations for a zf 8hp swap ?
I am looking at doing one in my boosted e46 however there are so many variables (e.g. which 8hp you use, what controller ect) so had to give a cost estimate!
Would a pedal assembly out of a e46 and the front half of the driveshaft fit?
Hey mate, to my knowledge no it would need to be one out of an e36 :(
can i take a motor out of a auto e36 and put in a manual e36
I have been working on my e36 manual swap and I have all the correct parts but when it comes to slide the trans in I am left with at 1/2 inch gap do you know from what it could possibly be
Hey mate, not sure if this is too late but maybe check to see you have pushed the pilot bearing in further enough? Good luck!
Hey mate great video will the getrag 220 fit a 323i 1996 ?
Sure will mate!
@@jpbuilds5 if I was to put it in a already manual 323i what would I need to do any modifications or straight plug and play
@@corey9895Would be plug and play, came with a 220g from the factory
@@jpbuilds5 ok thanks for that I’ve had people tell me that they have different splines and drive shaft are different and some people say it’s plug and play there is not much information online
I have an M57 306D2 from an E 53 of 2004 and I want to convert it into a manual which gearbox do you recommend
Will a GS6X-53DZ fit straight away to this engine??
Hey man, im not too sure on diesel stuff sorry :(
Thanks bro helped out so much, just bought a 328i e36 here in Melbourne.
Just had a question, do you think it’s better to tune the engine while N/A or put a turbo?
Turbo will always be better haha not much in it tuning wise when it’s N/A 😕
Is this same process for a auto m3?
Process would be the same, some parts would be different. I’d check realoem to see the parts you need!
Check carsales prices.... they are flying....
Dont fuck it dude..... they are being recognised globally as a modern classic.... the prices are going up super fast.... turn it into a performance cruiser..... please.....
youtube recommended me this after i zf swapped my car only to find out 1st and 2nd are gone. (I got scammed)
Depending on where you are in the world have a look at a gs6-37dz swap, 6 speed and as strong as a zf. I may or may not have a series coming out on the swap soon 🤫