Thanks for very informative video. can you access the ECU pinouts from within the AMT application, or you have to search for the ECU pinouts on different or another application. Thanks
Hola, necesito un diagrama de cableado de la entrada del ECD17C10 me puedes ayudar,los cables están cortados,y todos tienen el mismo color,necesito un diagrama gracias.
Can you repair my ECU peugeot 307 sw 2.0 petrol,,i have problem after my A/C turn off the fan radiator still running,but the compressor off...and my compressor A/C didnt cut off at temp 22 reach,,fyi my heater core already bypass
Hi Steve, I have a suspect 9M51-12A650-BF ECU from a Ford Focus 1.6 TDCi 2009, I think it's dead. Do you know how much current it should pull when powered up on the bench? I put +12v on C418, pin C3 and GND on pins H1,H4 and G4. It only draws 4mA. I can't get the ODB scanner to connect and the car wont start. Checked all the wiring so think the ECU is dead.
@@StevenLewis-HDI-Tuning hi Steve. Pretty sure. Traced it back to fuse box. Thinking that something in the pcm power supply has popped. I'd expect it to pull a few hundred ma at least. Not sure if there are any other pins need power on to get the pcm going. Can't see anything on the car schematics.
@@StevenLewis-HDI-Tuning Not been brave enough to open it yet! I've seen your helpful videos on how to do it though! I dont want to ruin my chances of getting someone like ECU Testing to repair it if there's nothing obvious wrong inside - like shorted caps or blown diodes.
@@richardmarkham8369 I can probably connect to it and will be a great deal cheaper than ecu testing. Do you have proper equipment or ebay stuff and have you done one of these before and made it work?
Usually you can find everything if you search the ecu model and processor on Google. Sometimes you need to be a member of special forums or if you buy a genuine tool you can ask the tool supplier for the pinout diagram.
Only real kess will do this over OBD. Combi loader, bitbox are quite cheap and can do this over OBD. Better still is bench service mode woth PCM Flash, its in my other videos
@@StevenLewis-HDI-Tuning It's a false economy, you've no recourse should it fry your ecu or crash, however if you want to risk your own ecu then fair play, but when dealing with peoples car's and offering a so called bespoke and professional service it's best to use industry standard equipment.
![Чип Тюнинг [ Прошивка ЭБУ ] Знакомство с MPPS V18 на примере Bosch MEDG 17.9.8 BSL / Инструкция](http://i.ytimg.com/vi/Wak3d-gT4mg/mqdefault.jpg)
![Чип Тюнинг [ Прошивка ЭБУ ] Знакомство с MPPS V18 на примере Bosch MEDG 17.9.8 BSL / Инструкция](/img/tr.png)
Hi bud.
Superb video.
I really enjoyed this.
Keep up the absolutely superb,work.
And the great vids.
Chers stephen
thank you for this video
Mohammed from morrocco🇲🇦🤝
Thanks for very informative video. can you access the ECU pinouts from within the AMT application, or you have to search for the ECU pinouts on different or another application. Thanks
Usually I just search there's nothing like that inside of mpps software. Dimsport has them integrated to the software like ktag
thanks youfor this vidio❤
Thank you bro🥰🥰
Hola, necesito un diagrama de cableado de la entrada del ECD17C10 me puedes ayudar,los cables están cortados,y todos tienen el mismo color,necesito un diagrama gracias.
Hi Steve I’ve got 1.6 Tdci transit connect what’s the maximum power you can map it to ?
Thanks Vince
Stage 1 is 150
Can you repair my ECU peugeot 307 sw 2.0 petrol,,i have problem after my A/C turn off the fan radiator still running,but the compressor off...and my compressor A/C didnt cut off at temp 22 reach,,fyi my heater core already bypass
@@agungyuliyantonugroho yes, drop me an email with a photo of the ECU label
did you first applied dc power and then connect the boot cable???
Thank you very informative video. Please how Can I get electric schematics for Peugeot and Citroen???
I can help you about Peugeot schematics, contact me +543816453972
How much volt is the alimentation of the tricore boot?
Its doesn't matter too much, 13.2v is a nice voltage to use
@@StevenLewis-HDI-Tuning alimentation of the adaptor tricore boot?
Hey do have any products for a 08 150THP 1.6 308 peugeot.
Good my ecu in peugeot 308 got damaged what can do
I have most in stock. Email me a photo of the label to remap@hdi-tuning.co.uk
Hey man what about Peugeot 308 2.0L can you give me any info.😁😁
Hi Steve, I have a suspect 9M51-12A650-BF ECU from a Ford Focus 1.6 TDCi 2009, I think it's dead. Do you know how much current it should pull when powered up on the bench? I put +12v on C418, pin C3 and GND on pins H1,H4 and G4. It only draws 4mA. I can't get the ODB scanner to connect and the car wont start. Checked all the wiring so think the ECU is dead.
Yes 4mA is much too low, sure you have the right pinout is the ford pinout the same as the PSA? its worth double checking it
@@StevenLewis-HDI-Tuning hi Steve. Pretty sure. Traced it back to fuse box.
Thinking that something in the pcm power supply has popped.
I'd expect it to pull a few hundred ma at least.
Not sure if there are any other pins need power on to get the pcm going.
Can't see anything on the car schematics.
@@richardmarkham8369 how does it look inside? With ford you can program a replacement unit using ford IDS over OBD
@@StevenLewis-HDI-Tuning Not been brave enough to open it yet! I've seen your helpful videos on how to do it though! I dont want to ruin my chances of getting someone like ECU Testing to repair it if there's nothing obvious wrong inside - like shorted caps or blown diodes.
@@richardmarkham8369 I can probably connect to it and will be a great deal cheaper than ecu testing. Do you have proper equipment or ebay stuff and have you done one of these before and made it work?
How do you disable DPF on a citroen C4 picasso with MPPS Tricore ?
I've got MPPS tricore and also PCM Flash that can program the EDC17C10 without needing to open the lid ;)
Hello i connect mpps v13.02 and computer don't see me car citroen c3 piccaso how you can help me
@@StevenLewis-HDI-Tuning hi, ktag work over obd? Am i miss something?
@@mrt-ee1zn ktag is only for bench programming
Hello
I have send to you a email for a remap in a 308 120 hdi 1.6 from 2016. Do you have news?
Contact me by email. I'm working on this now I have one in my workshop tomorrow.
I now have this remap available: www.hdi-tuning.co.uk/ecu-remapping/custom-remaps/Peugeot-Citroen-1600-120-EDC17C60-BlueHDI-GTD1244VZ.html
Very good.
How long the bootpin need to be on ?
@@maskulm7149 in boot mode it stays on
Hi Steven, i have a 2004 307 HDI with endless ECU problems, the BSI does not match the ECU to Unlock/ start, any advice
How dou you know pinout for ECUs Tricore mode? does it come with software and you get pictures with connection and boot pin?
Usually you can find everything if you search the ecu model and processor on Google. Sometimes you need to be a member of special forums or if you buy a genuine tool you can ask the tool supplier for the pinout diagram.
@@StevenLewis-HDI-Tuning thx!
3min47 error the pin19 is plug to the green not red !!!!
No, this pinout is correct ive used it hundreds of times? What do you mean
why not kess v2 clone ?
Only real kess will do this over OBD. Combi loader, bitbox are quite cheap and can do this over OBD. Better still is bench service mode woth PCM Flash, its in my other videos
а ты харош....
i have an old 1.4 306, can you help me?
ktag from china ?
don't even bother with that thing if you value your ecu
@@adivarso8175 not true!
@@adivarso8175 they actually work ok for one off jobs. I myself use only genuine equipment for use on customers ECUs as it's much more reliable.
@@StevenLewis-HDI-Tuning It's a false economy, you've no recourse should it fry your ecu or crash, however if you want to risk your own ecu then fair play, but when dealing with peoples car's and offering a so called bespoke and professional service it's best to use industry standard equipment.
Hie
Isitarak çıkar bundan sonra
нормально ковыряется, так бы и я смог, у нас в раше ровнее делают
You have an email address please?
Its on hdi-tuning.co.uk