Template Routing for Beginners: 5 Essential Tips👍
HTML-код
- Опубликовано: 10 фев 2023
- #routing #beginners #templates
I thought I would put this video together to talk through and demonstrate some key tips when entering the world of routing using a template and how I think they would be of great use to beginner woodworkers. It does have a big emphasis on safety and I believe sometimes folk can forget how dangerous a router can be if you don't use it correctly.
If you would like to check out my new website and maybe consider making a purchase or even subscribing to the members only section then please visit:
www.hand-i-craft.com
03a Adhesive 10% discount offer visit:
www.o3adhesives.co.uk/?sca_re...
If you would like to make a one off donation to support the channel then click on the link here:
www.buymeacoffee.com/handicraft
As ever, thank you so much for your continued support in my disability woodworking adventures. Please consider giving the video a thumbs up and maybe even subscribing to the channel. Best Wishes, Leo
All Social Media, Merchandise and Contact Details can be found at:
linktr.ee/hand_i_craft
You can contact us at: 75handicraft@gmail.com
Chops Designs Templates:
/ chopsdesigns
Links to some of the equipment I use on the channel. If any are linked to Amazon, as an Amazon associate, I earn from qualifying purchases made through these links:
1/4 inch Spiral Flush Trim Router Bit:
amzn.to/4117iHJ
1/2 inch Up Down Shear Trim Bit:
www.wealdentool.com/cgi-bin/s...
Trend WRT Router Table:
amzn.to/3J03fSm
Trend T14 EK 1/2 inch 2300w Router:
amzn.to/34zYrUX
Trend T33a M Class Dust Extractor:
amzn.to/3fo90f0
Trend T18-S 18v Cordless Router:
amzn.to/3EQ2PvI
Trend WRT 'Down Pressures':
amzn.to/35Q856q
Trend WRT set of 4 Castor Wheels:
amzn.to/3pXks7y
Trend T18S 4AH Cordless Battery:
amzn.to/3FXQINA
Trend T18S 2AH Cordless Battery:
amzn.to/3171a6f
Trend T18S Battery Charger:
amzn.to/3cUNhdR 
Хобби
I’ve been woodworking for 11 years. A router table was my first NEW tool purchase when i got started. I was always very intimidated. I love routers. Probably one of my favorite tools because of all the things it can do. But even today after 11 years…. I am VERY careful with the router (all 6 of them. I may have a problem lol).
OMG! That big beast of a bit is awesome. I do like that you mounted the template for the round parts and use a palm router. I always feel safer when I’m holding the router instead of on the table. Thanks for sharing.
Thanks Angie for your very kind feedback, much appreciated 😀😀👍👍
Some good points there mate. But number 6, use the lead in pin supplied with the router table (I have the same table as you). A nice and safe way to introduce the work to the bit.
Great point pal. Tbh I’ve enough to do a follow up vid. Will see how this one goes and something I might consider 👍👍
Thank you for the information, routers scare the crap out of me. This was very helpful and it will make my routing much safer
Cheers for the feedback 😀😀👍👍
Safety is paramount, thanks for reminding even the most experienced of us. We all get complacent after we get away with something we have done a dozen times or more 😁
Thanks Derek, didn’t appear to be much out there for beginners hence creating this video 😀👍
Really nice router tips. Especially from the safety angle.
Thanks, safety really does have to be number 1 doing these kind of tasks 😀👍
Brilliant tips video glad I found it , worthy of a subscription 💯👍🏻
Thank you, much appreciated 😀👍
Brilliant video - best I’ve seen.
Thanks Leo. Brilliant tips for people like me, and a few that I haven't seen mentioned anywhere else. Nice one. Cheers.
Cheers, I was actually quite surprised the lack of info aimed at beginners for a topic like this, hence putting it together 😀😀👍👍
Great video, sometimes we all need a reminder of how to use these tools, thanks 😊
Cheers David 😀👍
Interesting reminders there, thank you
Thanks Paul 😀👍
Great job on the video. I appreciate you taking time to show and say what you’re doing.
Thanks Susan, much appreciated 😀👍
So I came here after getting a wine caddy template and thinking "how hard could it be?" Well after my dull 1/2" spiral bit gave me violent tear out, I became even more scared of the router table than I wanted lol. I purchased a 1/4 shank 1/2" compression bit, and a spiral bit for my trim router. Like you I feel much more comfortable holding the router. Thanks for all the great tips!
Cheers Bryan for kind feedback, much appreciated 😀👍
Brilliant tips Leo! You are a truly amazing woodworker and your videos are incredibly wholesome and inspiring
Thanks for the very kind feedback, much appreciated 😀😀👍👍
Excellent video! I learned so much! Thank you.
Very kind of you, thank you very much 👍
Good stuff, thank you for the useful tips.
Thank you, much appreciated 😀👍
Great video and some useful tips 👍
Cheers Tomas, much appreciated 😀👍
You are truly an inspiration my friend, would like to see your strategies to install a new router bit into a palm router or the table router with just one hand
Thank you for the kind comments. You can find how I change a router bit in a table mounted router here:
ruclips.net/video/dCtwFMkoN-M/видео.htmlsi=t7G1bw8rE1n1ubuk
And a palm router here😀👍:
ruclips.net/video/9ZCXllS2qBk/видео.htmlsi=ZunxaDY8PYQWNPzN
👍👍👍 Thanks Leo
Cheers 😀😀👍👍
Amazing video and very helpful thank you
You’re welcome 😀😀👍👍
Cristal clear - Cred - I learned a lot! :)
Thanks Anders 😀👍
Great video pal keep up the good work
Thanks Ricky😀😀👍👍
Great tips, Leo, and just what beginners need. Hopefully you've given me the courage to use the fancy pants router I got for Christmas and which remains unopened...😬
Good luck with it Mandy ❤️😀👍
Great advice and demonstrations. Have to admit the router is the only machine that still scares the hell out of me! Great format and the invitation to like etc sounds fine.
Thanks Ben for the feedback, in regards to the like 👍 bit, be interesting to see if it makes any difference 🤔🤷♂️
@@Hand-i-Craft I hope so. I suspect adding a like/subscribe 'clip' in my own posts plus the hashtag key words increased my visibility and views (into double figures!) and what you offer is so much more 'likeable'. 👍
Nice one, Leo. Some good tips. Stay safe. Tony
Thanks Tony 😀😀👍👍
Thanks for opening my eyes to some issues. Dont think i was being wreckless but sure was being ignorant. Guilty of using the larger bits, the speed control & just unaware. Thanks for the heads up.
Thanks Steven for the feedback 😀😀👍👍
I'm literally sitting with a would on my hand from kickback because I didn't follow tip #1. I didn't know at the time I needed to cut so much stock away. I don't have a jigsaw, just a hand saw, and I was trying to save myself a hand cramp. Apparently hindsight is 20/20 and a bandage.
Sorry to hear about your accident David and I hope you’re on the mend and back in the workshop soon👍👍
Thanks for the informative video! I just got a Bosch 27 in. x 18 in table for my birthday. I still have to put it together, but your video is helpful to see how I will use it! Thanks again! Gonna subscribe to support your channel!
Thank you for the kind words, much appreciated 😀👍
Sweet little video there, Leo. Covering all the serious stuff. If I might add an addenda to the last tip; 'introducing the router' Many noobs might think that if the bit isn't biting a load of material then it isn't making a 'significant' pass. Your introduction pass, aesthetically [with obvious sanding] would make a perfectly acceptible, subtle round over. Much neater on smaller boards and safer too, esp if using a palm router at that stage. Cheers mate.
Nice one, thanks Keith for the feedback pal😀😀👍👍
All good solid tips Leo, I do the same steps, but use my simple Katsu powered router table for the whole process with the wine caddies, I prefer the template on top 👍.
Thanks Bill, yes I’m the same with the template. Sorted a system in the workshop as well now that will work well for small batch production 😀😀👍👍
Nice tips Leo.I particularly like the tape trick, finding good double sided tape is like finding cheap birch plywood! 😀 Regards JP
Nice one JP, cheers for the feedback pal 😀😀👍👍
I've never heard of a router bit exploding, but that doesn't mean it hasn't happened .... I have had bearings collapse but that tends to just take a chunk out of the work piece ... and yes, spiral bits give a far superior cut. With regards the speed of the bit, go with what the manufacturer recommends, the general rule being that the larger the bit the slower the speed (rpm of the router).
I think the best tip you gave is to do multiple passes, it reduces the amount being cut each time, meaning less stress on the bit, less tear out and of course a better finish
Thanks Barry for the feedback here, much appreciated 😀👍
Lots of great advice there Leo and the templates look great. I get the impression that those are some hard-learned lessons ❤ ?
I’d add another tip about making sure that the router bit is pushed well inside the router collet, i.e. not too much shank exposed. I was using my bearing guided straight bit (I know I know) to trim some handle cutouts and after doing several I think the bit moved slightly and it all rapidly went pear-shaped. If the bit is not straight and even in the shank the rapid spinning will cause undue stress and imbalance. In my case the shank bent and there was a lot of noise as it was now no longer evenly balanced 😮
If you do a follow up, worth covering the push sticks as well. The one you used on your router table looked especially grippy
Thanks Geoffrey, yes that was on my shortlist tbh, along with making sure the router table is nice and smooth with no debris, but I wanted to get it down to 5 to try and keep the pace of the video up. I’ll see how this one goes and yes might do a follow up👍👍
Great video Leo very informative, i think the main problem with straight flush bits exploding is when people buy the cheap bits they have very poor quality bearings that break down very quickly they are okay to use in my opinion but buy good quality ones and not cheap ones. 👍
Thanks Rasmo and yes agree with what you say here. I just also think spiral bits are better for a beginner because they are more forgiving as well albeit they do cost more money. Hope you’re keep well pal, best wishes, Leo 😀👍
Excellent video, thanks for sharing.
Can you recommend a brand of double sided tape that peels off easily and doesn't leave any sticky residue please?
Thanks for the comment. Tbh now I use painters tape and drops of o3a ca glue with activator spray. Fantastic adhesion and clean up is so much easier 👍👍
@@Hand-i-Craft great, thanks for your help, much appreciated 👍
While I’ve not tried it, hot glue seems to work well to secure templates to the wood as well.
Thanks for the tip Shane 👍👍😀😀
Flush cut bit diameter? Obviously dependent on how sharp the template angles are, but some advice would be good.
Are you looking to mainly use a palm router Larry?
@@Hand-i-Craft I have a nice full-size Bosch router and a smaller compact router. The Bosch tends to live in My router table, and I think of it as for outside curves.
@@LarryBinFL Excellent, two great options. If you have a look in the description I have links to the router bits I use so I hope that might be of some help 👍👍
The rule of thumb for routing is the larger the bit the slower the router speed should be.
Thanks Simon👍. I also found with the roundover it only needs to be on a slow speed as well 😀👍
Just started using different types of wood where is the best place to find these exotic woods.Bry
Where abouts are you based Bry?
Exotic Hardwoods up in the Staffordshire Moorlands (at Ipstones) deliver all over the UK and have decent stock levels. Their pricing is competitive and also have a planing option.
Plymouth in devon
5:08 This is misleading because you don't need to use a bearing guided bit at all. You could fit a router template guide and then any bit can be a used. Many people say using a template guide is better than bits with guide bearings.
Do you mean a guide bush then yes absolutely, but what type of bit would you recommend to use with them just out of interest? And when you say ‘many people’ I get what you’re saying but that phrase does make me think of the kind of thing Donald Trump says all the time🤷♂️
I’m really sorry, I have a daft question.
Why does the router bit not consume the template just as does the wood.
Is it height adjustment
See, I told you it was daft
Not daft at all David, that’s why this video is here to help folk along the way. On the router bit there is a bearing guide, quite simply a wheel that you align with the template so the bearing works it way along the line of the template while the bit cuts away the wood underneath it (or above it if it’s upside down). Does that make sense pal? 😀👍
@@Hand-i-Craft
Perfect sense
Thanks
...its about time you stopped showing off - use both hands!
🤔🤔😂😂😂😂😂