igen, az; a tiéd (valószínűleg) azért van jobban behajolva, mert már kopott az oldaltámasz tengelye vagy annak a furata. nézd meg felhajtva, milyen oldalirányú mozgása van.
1.5 turns air screw is the base setting, nothing wrong there. your problem will be a dirty carburetor, an unstable idle is a clear indication of that. i had the same problem when i bought mine, i cleaned my carb and changed gaskets, the air screw, after that a very stable 1500 rpms idle was obtained.
very nice the oil cap gauge!! Where could I buy it?!
i have it from louis.eu, T&T oil temperature gauge
www.louis.eu/en/t-t-oil-temperature-gauge-various-motorcycles-10035370
Thanks for the info... I always open the red and black lever on a cold engine. 😑
the hot starter only pulls the throttle a little, it works quite well on a hot engine, on your cold one it is not necessary to do that!
More videos please 🤘
Ez egy OEM side stand a motoron?Mert az en motorom sokkal jobban be van hajolva
igen, az; a tiéd (valószínűleg) azért van jobban behajolva, mert már kopott az oldaltámasz tengelye vagy annak a furata. nézd meg felhajtva, milyen oldalirányú mozgása van.
@@millmotormuvekhol erhetlek el?Instan nem talallak
mill motor muvek néven keress!
What if mine revs to high with choke, about 3000 rpms ? and needs to stay on with choke for a few minutes, because otherewise its stalling ??
what is your normal idle speed?
Your carb needs adjustment,and maybe you have a slightly thicker oil for your temperature
@@bikeserv what kind of adjustment? My air screw is on 1,5 should i put it more in or out ?
@@millmotormuvek depends sometimes 1300 or even 1700
1.5 turns air screw is the base setting, nothing wrong there. your problem will be a dirty carburetor, an unstable idle is a clear indication of that. i had the same problem when i bought mine, i cleaned my carb and changed gaskets, the air screw, after that a very stable 1500 rpms idle was obtained.