Kraus Kitchen Sink Faucet & Disposal Replacement | Kitchen Makeover Series Part 7
HTML-код
- Опубликовано: 16 янв 2021
- Kraus Stainless Steel Sink 33-in x 22-in Single Bowl w/cutting board & drying rack
www.lowes.com/pd/Kraus-Kore-3...
Kraus KPF-1610SSMB Bolden 18-Inch Commercial Kitchen Faucet with Dual Function Pull-Down Sprayhead (Stainless Steel/Matte Black)
www.amazon.com/dp/B075QZ1H16/...
Evolution SpaceSaver XP Non-corded 3/4-HP Continuous Feed Noise Insulation Garbage Disposal
www.lowes.com/pd/InSinkErator...
Regular Guy DIY is a RUclips Channel committed to empower 'regular' folks to have the confidence and information to safely complete home repairs and improvements on their own. Hosted by commercial and film actor, Jeff Moore.
🔔Subscribe for more DIY tips: ruclips.net/user/RegularGuyDIY...
❤️Regular Guy DIY Social Media:
/ regularguydiy
Regular-Guy-DIY-109520090741743/
RegularGuyDIY
🎬Jeff Moore - Actor:
www.imdb.me/jeffscottmoore
www.jeffmoore.actor
jeffscottmoore
jeffrey_moore_
/ jeffscottmoore
RELATED VIDEO LINKS:
-------
Daich Spreadstone Countertop Finishing Kit (Kitchen Makeover Series Part 6)
• DIY Daich Spreadstone ...
Kitchen Counter Top Refinishing Kits - Ruined? (Kitchen Makeover Series Part 5)
• Daich & Giani DIY Coun...
Kitchen Island Makeover - Butcher Block Counter Top & Columns (Kitchen Makeover Series Part 4)
• DIY Butcher Block Isla...
Kitchen Island Makeover - Cabinet Trim (Kitchen Makeover Series Part 3)
• DIY Island Cabinet Tri...
Learn how to Paint Cabinets with Chalk Paint in 3 Minutes! (Kitchen Makeover Series Part 2)
• DIY Cabinet Chalk Pain...
How to Paint Cabinets with Annie Sloan Chalk Paint - Bright White (Kitchen Makeover Series Part 1)
• DIY Cabinet Painting w... Хобби
Just came back from HD with an amazing headache since I was trying to figure this out myself. Thanks DIY guy (aka Jeff)! You just made my day!
Wow! So happy to hear!... not the headache part, of course. Please share how things work out for you. Thank you for watching and commenting!
I just had a Kraus sink installed and love it
So happy to hear that. Thank you watching and commenting. Wishing you the best!
Beautiful sink and you did an excellent job!
Thank you for watching and for the kind words!
This is a very helpful video, a great help in planning the sequence. Thanks!
Glad it was helpful!
Always recommend opening faucet and checking line for any pressure/bad valve after turning off main line valve and before unscrewing line to faucet... always ever since I dealt with a bad valve and had a nightmare situation on my hands lol.
Great tip! Thank you. Wishing you the best!
Amazing
Such a lovely large sink. I do a lot of cooking and washing so will look into perhaps purchasing this one day. Thank you for a great video. All the best. 👍😊
Thank you for watching and for your kind words. Wishing you the very best!
The algorithms led me to your videos, thanks to my recent Kraus Kore Workstation purchase. I loved the video! It was very helpful to see ahead of time. It also led me to realize maybe I should try to resurface or old countertops add well since I'm at it, and you made it look so easy (darn savvy diy videos making me think I can be handy too.)
I am replacing all plumbing under my sink with this swap out, and was eager to see what it looked like under your sink when you were done, but it looks like that shot wasn't included. Is that something you're willing and able to share? Thanks for considering!
Warm regards,
A Novice Plumber
I’m happy to hear that you found the videos helpful - that’s why I love sharing my experiences. It doesn’t appear that I can share pics or video in the comments section. It was really a simple modification. I would be careful not to depart significantly from the original plumbing arrangement. If going from a two-bowl sink like I did, simply remove the section from drain/garbage disposal up to the point where they join. Replace with the same diameter pipe and keep the arrangement as simple as possible, generally following the same plumbing route. I’m sorry to have left that portion out of the video. Wishing you the very best.
what is your new sink size?
You didn't put any silicon around the edge of the sink. It keeps water from going under the sink and helps hold the sink in place.
Good catch. I did silicone but it wasn’t captured on video. Thanks for watching!
Thanks for the suggestion to donate things to ‘Habitat For Humanity’. Love the idea.
Thank you for watching and commenting. Wishing you the best!
The Kraus website calls for a bead of silicone under the sink before it is tightened down. I didn't see that you did that...?
Bought the same sink!! Also going from a double to a single sink, what piece do I use to cap the other drain pipe?
I hope you enjoy the sink. You can either remove and reconfigure the drain piping to eliminate the “Y” drain connection or purchase an end cap for the unused section. Wishing you the best!
How efficient is the water drain with the offset design on this model sink versus a center drain?
That’s a great question James! I haven’t noticed any difference in the offset design compared to our old center drain sink. Thanks for watching. Wishing you the best!
How’s everything working so far? Any complaints/suggestions. Looking to take out old double sink for single sink
We are loving this sink and faucet! Really like the bottom rack but it does take more time to clean than the old sink. It’s sooo worth it though. Please let me know how your project works out. Thanks for watching and commenting. Wishing you the best!
You don’t put Teflon tape on a supply line, it’s not doing anything. But more importantly it’s against code to hardwire a disposal. Thanks for the video I am considering buying this sink, it’s good to see it outside of a photo.
Thank you for the feedback! Wishing you the best.
Can you use the strainer that comes with the sink along with the disposal? I was told you cannot. I liked the strainer/stopper included with sink.
Absolutely. It should fit.
No, I don’t believe you can use the strainer with the sink. Kraus sells a separate strainer for a disposal.
i didnt quite get what the problem was installing the faucet before the sink brackets. Did I miss a problem with that?
There’s simply a lot more room to work around the sink when before it’s inverted and installed. My goose required a bit of extra wrangling to install the brackets than it should have otherwise.
How is the sink holding up now? I saw mostly positive reviews, but did see a handful complaining of rust. Have you had any issues with that? Thanks for the video!!
It’s holding up great! Obviously the in-sink rack adds to a thorough cleanup but it’s not a lot of extra effort and it’s well worth it in my opinion. Thanks for watching and commenting. Wishing you the best!
Did you use any silicone or plumber's putty under the sink edge? I didn't see you apply anything before or after, seems like a huge water seepage risk; I'm not a pro but any overmount I've installed has called for either putty or silicone under the lip before clamping then you remove excess.
Great catch! There is a bead of silicone that is placed around the perimeter on the underside of the sink. Clearly, I failed to demonstrate or mention that step in my video. Great attention to detail!😀 Thank you for watching and commenting. Wishing you the best!
@@RegularGuyDIY nice I didn't notice that, great video either way and I love my single bowl!
No sealant used around the sink rim?
Ha! Great catch! There is a bead of silicone that is placed around the perimeter on the underside of the sink. Clearly, I failed to demonstrate or mention that step in my video. Great attention to detail!😀 Thank you for watching and commenting. Wishing you the best!
What disposal did you get? There’s no link for that in the caption :-) Also, did you have to buy a disposal sink drain or did yours come with it? I just bought the same sink but i need to replace the disposal as well
Good catch. I’ll add the link. The sink drain parts are included. Thank you!
Evolution SpaceSaver XP Non-corded 3/4-HP Continuous Feed Noise Insulation Garbage Disposal www.lowes.com/pd/InSinkErator-Evolution-3-4-HP-Continuous-Feed-Noise-Insulation-Garbage-Disposal/1000068731
So you can install garbage disposals on all these Kraus sinks
Absolutely!