Hope you guys enjoy this video. I know its a little long but its necessary for this repair. Hope it helps! Let me know what you think down below! Parts are in the description! Door Seal: fix.pxf.io/anvLvM
I completely agree lol it took me forever to film this one because of all the different steps. You may actually be better off buying a rivet gun TBH. May be worth a shot. They’re pretty cheap too.
I’ve had this one around 3 years. I love it but it’s had some issues like the lower seal needing to be replaced and the middle sprayer arm completely broke off. I do love it because it gets the dishes really clean almost every time with the linear wash.
Good luck!!! You may also want to consider drilling them out and using a rivet tool instead of the bolts and nuts. Although it worked great for me it was quite a pain. I just wanted the ability to easily replace it if it happened again. If you have any questions just reply back and I’ll try to give a quick response back.
With as small as the backside is I’m not sure you could get a pop rivet gun in there, plus I didn’t have one handy 😂 I liked the ability to be able to swap the gasket out in the future also if needed, without having to drill them again.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Hope you guys enjoy this video. I know its a little long but its necessary for this repair. Hope it helps! Let me know what you think down below! Parts are in the description! Door Seal: fix.pxf.io/anvLvM
Omg thank you, this is so much harder to figure out than it should be 😮❤
I completely agree lol it took me forever to film this one because of all the different steps. You may actually be better off buying a rivet gun TBH. May be worth a shot. They’re pretty cheap too.
Thanks for the clear and detailed guide!
Hope it helped!!
How long did you have the Dish washer? Wondering if worth keeping. We just bought a home with the same issue
I’ve had this one around 3 years. I love it but it’s had some issues like the lower seal needing to be replaced and the middle sprayer arm completely broke off. I do love it because it gets the dishes really clean almost every time with the linear wash.
Damnit I have to do this. Just ordered the seal. Didn't think I would have to pull the dishwasher out, ugh.
Good luck!!! You may also want to consider drilling them out and using a rivet tool instead of the bolts and nuts. Although it worked great for me it was quite a pain. I just wanted the ability to easily replace it if it happened again. If you have any questions just reply back and I’ll try to give a quick response back.
I don't know why you just didn't drill out the rivets in the first place and then just use pop rivets to put it together.
With as small as the backside is I’m not sure you could get a pop rivet gun in there, plus I didn’t have one handy 😂 I liked the ability to be able to swap the gasket out in the future also if needed, without having to drill them again.
I guess you could get the rivet in there pretty easily actually lol 🤦♂️