Academy 1/72 Scale F4U-1 Corsair- RNZAF JAYFORCE CORSAIR 1946-1948 (Brush Painted)
HTML-код
- Опубликовано: 7 сен 2024
- In the wake of the Surrender of Japan in August of 1945. The New Zealand government agreed to participate in the US-led occupation of Japan, as part of the British Commonwealth Occupation Force. Under the command of Brigadier Keith Stewart, more than 4200 New Zealand troops arrived in March 1946 to serve in the BCOF. The New Zealand occupation forces, (referred to as Jayforce) would also be accompanied with 24 FG-1D Corsairs of No 14 Squadron of the Royal New Zealand Air Force (RNZAF).
Arriving in Japan onboard the Royal Navy Aircraft Carrier H.M.S Glory at Iwakuni, Japan in early March 1946. Not long after arriving Japan, the RNZAF Corsairs would be put to use patrolling the skies and countryside and coastline around Iwakuni. With a patrol area spanning nearly 500 square kilometres. The RNZAF Corsairs preformed reconnaissance missions in order to enforce the allied demilitarization of Japan. For example, searching the countryside any for hidden ammunition dumps or flying over school yards for forbidden military parades.
Another missions the RNZAF Corsairs performed was flying low level dawn & dusk surveillance flights off the coast of Iwakuni. The purposes of those missions were to prevent the Vessels of Korean smugglers form entering the waters of Occupied Japan. The Pilots of the RNZAF Corsairs would continue to fly such missions around Iwakuni until February of 1948.
In February of 1948, No 14 squadron was transferred Bofu to relieve No. 76 (Fighter) Squadron, of The Royal Australian Air Force. The RNZAF Corsairs then took over duties previously performed by the RAAF P-51D Mustangs. However, this new deployment was not to last too long.
In 1947 Great Britain and India withdrew from the BCOF in 1947. Enthusiasm for New Zealand’s continuing involvement of the occupation began to wane. In April 1948, The New Zealand Government decided to withdraw Jayforce from Japan. From April 1948 to early 1949, New Zealand Personnel were gradually withdrawn from Japan.
As for the RNZAF Corsairs in Japan, the decision was made to scrap them. Back in New Zealand, the RNZAF was downsizing. With most of the remaining Corsairs in New Zealand were being sold off for scrap metal. With the type no longer in service with the RNZAF, back home. The JayForce Corsairs were stacked into a pile and burnt.
My model depicts an FG-1D, No 14 Squadron of the Royal New Zealand Air Force (RNZAF). With decals from Ventura Publications 1/72 scale RNZAF F4U-1D & FG-1D [V7285]. The kit was the classic Academy kit, which was a fun and easy build.
Thanks for watching
From
Shuttle Factory Scale Models
Video Chapter List
THE ASSEMBLY - 00:15
PRIMING & PAINTING- 03:42
APPLYING THE DECALS- 06:29
THE FINAL ASSEMBLY-08:46
THE COMPLETED MODEL- 10:36
I like watching videos like this to see what results can be achieved with more basic tools in an out of box build. Too many channels feature a bewildering array of specialized tools plus the obligatory airbrush with painting booth, aftermarket PE and resin parts and the odd 3D printed creation thrown in. Now I'm not knocking all of that, I think these things are great but not everyone is going to go to the expense of buying all of that to build the odd kit.
This is something I think I can do with what I have.
Thank you.
I'm very happy to hear that this video has been a source of inspiration for you. I agree that the cost for a lot of the equipment that you have described can range in total into the thousands. An airbrush for example will give you a smooth a level surface over a wide area. Thus, speeding up the painting process. But the cost and maintenance of one is not something that everyone can afford (especially nowadays).
However, look at it this way, many of those modelers still use the humble paint brush for touch ups. And for complex things such as figure painting. The humble brush gives great results there. And I’ve found that if you use a wide flat head brush, with very thin coats of paint over a wide area. With the brush strokes going in one direction. With plenty of drying time you can get some amazing results.
Hope you will be trying some of the techniques in this video. Good luck with all your ongoing projects. And of course, thank you for watching and commenting.
A minir point but the RNZAF flew F4U1-A Corsairs during the war, but were provided with FG1-D Corsairs for their J-Force duties, post-war. The FG1-D was a Goodyear built F4U1-D.
i love using brushes instead airbrush there's something else i like
Hello Adrian, I'm glad to see you love using the humble paint brush on your models. Good luck with all your ongoing projects & thanks for watching
Really nice work. Superb effect with just a brush!
Thank you so much! It is always nice to see that people get a kick out of my brush painted models. Thanks for watching.
Nice build!!
Thank You
Like the attention to detail with the painted over bars. Do you think you'll do P-40 Gloria Lyons at some point? The amount of colour schemes showing through and weathering would make it an interesting one!
Thank you I'm glad you loved the painted over bars outline. I do intend to make an RNZAF P-40 at some point. (The story of the Gloria Lyons P-40 is a really heart touching one. And luckly Ventura Publications has made a set of decals to depict RNZAF P-40Ns, which inculdes Gloria Lyons). Along with the RNZAF FB. 5 Vampire and T.11 Vampire, and RNZAF A4 Skyhawk.
However I'm intending to start work soon on an RNZAF Grumman TBM Avenger. In the colours of one of the two TBM Avengers used by the RNZAF, in its 1949 top dressing trials. I'll be using the 1/72 scale academy kit for that, which will need a bit of conversion work (like covering up the rear gun turret, making a bomb bay with a hopper tank inside). So expect to see that in the near future.
In the meantime feel free to check out my other build video on the Revell 1/72 Scale F-4U Corsair (made in 2019). In the colours of an WW2 RNZAF Corsair. Hosted on Model Minutes' channel ruclips.net/video/-YSGBrVcsaY/видео.html
And of course thank you for watching!
Always enjoy watching your builds. Please keep it up!
Thank you Andrew. Glad to hear that you enjoy watching my videos. I've already started work on the next video, the Tamiya 1/48 Scale T-55 Tank.
Dam I did know the country i live in had these during ww2
The rnzaf had 140 of them they replaced the p40 warhawks as our front line fighters in the Pacific
hi from NZ i did the some plane but in 1/48
Kia Ora it's nice to see a fellow Kiwi modeller commenting on one of my videos! Glad to hear that you have made a 1/48 scale Corsair, in RNZAF colours. Thanks for watching.
nice one i heard academy decals are horrible
Thank you. Yes you are quite right ,Academy decals are notorious for being of poor quality. Especially in their line of 1/72 scale Aircraft kits. Which is a shame since the models are nicely detailed. This time it was not a problem since I used a NZ produced aftermarket decal set, on this model.