awesome stuff guys!!!! i use this method now thanks to you!!! but, what i like to do is use a strip of thin cardboard to make the line even straighter!!! just like they do when they make sofas.
Thank you, glad it was helpful for you! Yes, that's a nice tip with the cardboard strip as a straight edge, less reliant on getting the staples completely straight that way too. Might be a touch more forgiving. I like that, I'll be thinking on that ;-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too! 2) Please ensure you subscribe to our RUclips channel. 3) Please Like our video's on RUclips (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
I'm glad that I saw this finishing touch for the pockets. It hides the staples and wood, makes it so there is no exposed staples for the balls to hit and possibly scratch them, and is nicer to look at. once the material was stapled and upside down I sprayed contact cement on the back side, folded over a hem on the bottom and and folded down what now is a skirt, no stapling the bottom end to the table, it just hangs down a nice touch for sure. I went over the fold with a hammer and piece cloth (for cushion) between the hammer and stapled area and it pinched the glue fold tight. Thanks, -Mike
Glad you found it helpful, and always nice to see variations on this process! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too! 2) Please ensure you subscribe to our RUclips channel. 3) Please Like our video's on RUclips (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
Glad we could help :-) ----------------------------------------------- To help support us: 1) Please be sure to use our Amazon Links! 2) Please ensure you LIKE our video's, and SUBSCRIBE to our channel! 3) Donations always welcome! Hit the SUPER THANKS option below the video on RUclips! Thank you for your support!
Glad you found our video useful :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too! 2) Please ensure you subscribe to our RUclips channel. 3) Please Like our video's on RUclips (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
Glad you liked the video! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too! 2) Please ensure you subscribe to our RUclips channel. 3) Please Like our video's on RUclips (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
Yes, that would be possible. The only issue with using a material like plastic, leather etc under the cloth is that it needs to also be folded back over the staples and so may be quite 'thick'. And plastic may not fold back well because of the shapes it has to contort to to get the shape of the curve, whereas material is very flexible. But definitely an option and could be a nice finish with a decent thin plastic. Maybe a thin rubber would work better than plastic?
Yes, techincally you are correct. Maybe, in fact, it is a 83.33% omission as pockets could mean all six pockets 🙃 Seriously though, as you may have guessed, the process is identical regards of which pocket you are working on 🙂
@@AverageJoesPool ...Doesn't side pockets require extra steps to "finish" the leading edge correctly so that balls don't rebound incorrectly due to not folding the cloth the right way?
Air Stapler:
Amazon USA: amzn.to/47o9VFX
Amazon Canada: amzn.to/46r3SiP
Amazon UK: amzn.to/3RcNdeg
T50 Staples:
Amazon USA: amzn.to/40MVbyd
Amazon Canada: amzn.to/49PFiew
Amazon UK: amzn.to/47Kmb3r
Worsted Cloth:
USA: amzn.to/3e2eX1q
Canada: amzn.to/3jl53L2
UK: amzn.to/3Iq2HYw
Napped Cloth:
USA: amzn.to/3NGG5Vt
Canada: amzn.to/3VMymX9
UK: amzn.to/3CqFRfG
Staple Remover
Amazon USA: amzn.to/3SYKmY1
Amazon Canada: amzn.to/3QS0RCl
Amazon UK: amzn.to/46s3EI0
3M Super 77 Spray Glue:
Amazon USA: amzn.to/3R7YGe0
Amazon Canada: amzn.to/3R7YR9a
Amazon UK: amzn.to/41cSjdZ
Fabric Spray Glue:
Amazon USA: amzn.to/3GtIDlP
Amazon Canada: amzn.to/3NdGmiv
Amazon UK: amzn.to/47I4EcI
awesome stuff guys!!!! i use this method now thanks to you!!! but, what i like to do is use a strip of thin cardboard to make the line even straighter!!! just like they do when they make sofas.
Thank you, glad it was helpful for you! Yes, that's a nice tip with the cardboard strip as a straight edge, less reliant on getting the staples completely straight that way too. Might be a touch more forgiving. I like that, I'll be thinking on that ;-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too!
2) Please ensure you subscribe to our RUclips channel.
3) Please Like our video's on RUclips (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
I'm glad that I saw this finishing touch for the pockets. It hides the staples and wood, makes it so there is no exposed staples for the balls to hit and possibly scratch them, and is nicer to look at. once the material was stapled and upside down I sprayed contact cement on the back side, folded over a hem on the bottom and and folded down what now is a skirt, no stapling the bottom end to the table, it just hangs down a nice touch for sure. I went over the fold with a hammer and piece cloth (for cushion) between the hammer and stapled area and it pinched the glue fold tight. Thanks, -Mike
Glad you found it helpful, and always nice to see variations on this process!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too!
2) Please ensure you subscribe to our RUclips channel.
3) Please Like our video's on RUclips (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Beautiful. Very clean looking and reminds me of installing baseboards in a home.
Thank you, we really appreciate that! Yes, definitely a nice way to get the finished look :-)
Thank you sooooo much!!! 💜😊🙏🌺🌈
Glad we could help :-)
-----------------------------------------------
To help support us:
1) Please be sure to use our Amazon Links!
2) Please ensure you LIKE our video's, and SUBSCRIBE to our channel!
3) Donations always welcome! Hit the SUPER THANKS option below the video on RUclips!
Thank you for your support!
thank you for the tutorial ❤
Glad you found our video useful :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too!
2) Please ensure you subscribe to our RUclips channel.
3) Please Like our video's on RUclips (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
How ingenious!
Glad you liked the video! :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Average Joes Pool without the support of people like you! You can donate by PayPal - just go to www.paypal.me/thanksfixsavers - or alternatively you can click the SUPER THANKS icon under the video on RUclips and donate that way too!
2) Please ensure you subscribe to our RUclips channel.
3) Please Like our video's on RUclips (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Great video! Thank you
You are welcome!
I completely mold my pockets and then glue them down. I don't have that staple crease at all it's one smooth surface all the way down
Nice! Thanks for sharing 👍
In my opinion you should have stapled a thin strip of plastic, rather than the uneven series of staples for the best result
Yes, that would be possible. The only issue with using a material like plastic, leather etc under the cloth is that it needs to also be folded back over the staples and so may be quite 'thick'. And plastic may not fold back well because of the shapes it has to contort to to get the shape of the curve, whereas material is very flexible. But definitely an option and could be a nice finish with a decent thin plastic. Maybe a thin rubber would work better than plastic?
Me encantan elbillard
Thank you!
Your title says "...pockets...", but you didn't show how to finish off the side pockets. That's a 50% omission! ;)
Yes, techincally you are correct. Maybe, in fact, it is a 83.33% omission as pockets could mean all six pockets 🙃 Seriously though, as you may have guessed, the process is identical regards of which pocket you are working on 🙂
@@AverageJoesPool ...Doesn't side pockets require extra steps to "finish" the leading edge correctly so that balls don't rebound incorrectly due to not folding the cloth the right way?