Filling the mold with several small pours rather than pouring the liquid clay all at once allows the clay on the lower portion of the pitcher to be thicker which is where it needs to be strongest. This way as the body of the pitcher progresses upward the walls become thinner which makes the pitcher less heavy and easier to use.
This is the only natural source for burning in kiln these guys are not burning any coal or furnace oil which can cause risk for the environment. Thanks a lot for your comment.
@@SkillSpotter well, the combustion of coal and oil certainly produce each different "side products", the burning of wood though is not a good option neither I am afraid. Sure, I live in central Europe, we think that the use of solar and aeolic energy is a way better way to protect us from the effects of rapid climate change. But I also understand that most humans live in places, where this ideas yet have not arrived. So I admire old skills and leave you back with new ideas for new skills. ;)
NAA MUKAMMAL. LAST KAAM TO DIKHAYA HE NAHIN. BHATTI MAIN KAYSAY RAKHAY. ISS SAY PEHLAY MOULD KAYSAY THAY. BANAY BANAYE YAA KHUD BANAYE. ASAL BAAT TO YEH THEE.
Initially he is filling upto top level and allowing to solidify some time later he is draining temaining liquid.during this time peripheral layer of slurry is solidifing.😊
It is a long time training work to be an expert they are only using clay and gypsum powder made molds. I'm very sorry for giving you a very late reply.
Excellent work. The guy is very handsome too.
Fascinating. Slip casting always feels like a miracle, the highly fluid clay solidifying, as it does.
Thank you very much for your appreciation and valuable comment.
Very fascinating and very delicate but you are a master craftsman. I salute you.
Mitti ko jaldi hard karne k liye kon sa camical use hota h
ماشاءاللہ سبحان اللہ جزاک اللہ ۔۔۔🌸🇵🇰🇵🇰🇵🇰
They do so hardwork n making so beautiful things
Thank you very much for your beautiful comment.
Filling the mold with several small pours rather than pouring the liquid clay all at once allows the clay on the lower portion of the pitcher to be thicker which is where it needs to be strongest. This way as the body of the pitcher progresses upward the walls become thinner which makes the pitcher less heavy and easier to use.
Thank you very much for your expert opinion.
Keep supporting!
Thx for explanation. I was wondering why.
تبارك الله. باركك الله اخي وبارك عملك ورزقك💐
Молодец!золотые руки и терпение!
Marvelous!
Nice! Thank you for the upload!
Glad you like it! Thank you so much.
Top class working skills ❤
Thank you so much 😀
Appreciate your patience and skills 👍☺️😊
Thank you so much 😀
Fantastic!
Much awaited ❤
Thank you very much dear.
Bahut khuoob bayi
Thank you very much.
What is the reason for pouring a bit in each mold rather than filling one entirely than the next (and so on)?
For Leakage testing of the base.
Thank you very much for your comment.
How much time required for making one jug?
eccellente!
Grazie mille e scusa per la risposta molto tardiva.
Nice work, good man 👍🙏
Thank you so much.
Polothin se kin camical nikal kar dala h inhone
Is anybody concerned by the impressive amount of unfiltered smoke produced by the burning of that scrap wood? 🤷🏻♂️🤔
This is the only natural source for burning in kiln these guys are not burning any coal or furnace oil which can cause risk for the environment.
Thanks a lot for your comment.
@@SkillSpotter well, the combustion of coal and oil certainly produce each different "side products", the burning of wood though is not a good option neither I am afraid. Sure, I live in central Europe, we think that the use of solar and aeolic energy is a way better way to protect us from the effects of rapid climate change. But I also understand that most humans live in places, where this ideas yet have not arrived. So I admire old skills and leave you back with new ideas for new skills. ;)
Can you please tell me, what are the ingredients to add the clay. I am from chennai
A deflocculant. Probably sodium silicate.
Probably also soda ash
NAA MUKAMMAL. LAST KAAM TO
DIKHAYA HE NAHIN. BHATTI MAIN
KAYSAY RAKHAY.
ISS SAY PEHLAY MOULD KAYSAY THAY.
BANAY BANAYE YAA KHUD BANAYE.
ASAL BAAT TO YEH THEE.
Thanks for the video, but can you say where this is?
Welcome and thanks a lot for your comment.
This video is from Gujrat Punjab Pakistan.
So how does the clay stick to the sides instead of settling at the bottom like it does in the barrel?
Deflocculation. Google it.
Initially he is filling upto top level and allowing to solidify some time later he is draining temaining liquid.during this time peripheral layer of slurry is solidifing.😊
Thank you so much for explaining.
The plaster the mold is made from leeches the water out of the clay letting it build up against the plaster. Time = thickness.
please share location and country
❤😮
Thank you so much.
Sir cemical name plese add clay mixing
👍👌
Thank you.
How to order?
Where is This Place ? Its amazing ❤
This is in Punjab Pakistan.
@@SkillSpotter from which city
Very good beautiful jug. Is there a way that I could order 6 and give a donation ?
Thank you so much.
These are not available online.
👌
Дуже цікаво. Україна
Велике спасибі з Пакистану.
Superb 💕💕💕💕💕💗💗💕💗💜💜💗💕💗💗💕💕💗💜💗💗💕💕💗💜💜💜
Thank you very much.
👍🏼
Thank you.
which city ?
Gujrat Pakistan.
Can you tell me what are ingredients???
Pls take training from him
It is a long time training work to be an expert they are only using clay and gypsum powder made molds.
I'm very sorry for giving you a very late reply.
🥰🙏🏾🙏🏾🙏🏾
Thank you.