TFL Pursuit Gets New Leopard 4074 2000kv Motor!!
HTML-код
- Опубликовано: 10 сен 2024
- Tfl Pursuit carbon fiber
One piece flex shaft
Seaking 180a
leopard 4074 2000kv
savox digital steering servo
octura x445
Song: Elektronomia - Sky High pt.II [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: NCS.io/SkyHigh2
Watch: • Elektronomia - Sky Hig...
She's definitely a hot looking boat
Thanks man!!
How's it going? I was getting ready to buy me a motor I'm looking at a TP 3640 2100 KV motor still on that 120 amp ESC with a 45 mm 1.9 prop with a 5200mAh 6s 80c battery is that going to be too much? I believe that motor pulls 100 amps and Max voltage is 28.8 I believe. In other words I'm not really sure how to match all this stuff and make sure I'm not going to overload my system I understand check your temps after about 30 seconds to a minute of running it my rule of thumb has been if I can't hold it for 5 seconds it's too damn hot but right now I'm still running really cool with the stock setup and I also just added in another line so the ESC has its own cooling system and the motor has its own cooling system or cooling lines I should say. I think it's going to be too much prop
Hey Russ! Everything is going great! The tp motor you want maybe a little small. I would be a little worried about over working the motor it probably would be greatin a smaller boat. I would recommend a 40 size motor at least. You could try it with maybe 42mm prop but I think you would have some high temps with the 36 size motor. The bigger the can the cooler it will be. If you think you want to try it go for it but I think you would be running on the edge or over the edge.
@@stevesballisticrc8770 what I was looking at the actual can is 15 mm longer which is supposed to give me more torque they're overall power is greater is 60 more amps than the other motor or can pull 60 more amps than the other motor and I'm going up from 1620 KV to 2100 KV which is about 12,000 more RPM
One of the main things I was looking at was the KV I need some more RPM trying to get it spooled up
Ok I just looked up the tp motor and I didn't realize they size motors different it is 36x70 give it a go and see what happens!
@@stevesballisticrc8770 yeah I didn't know that about TP Motors either at first the last two numbers is usually how what the length of the can is but that's not the case with TP strange but that's not the case with them. I appreciate you looking it up though yeah I think it it might do all right I mean eventually I want to go with the 40 mm motor and a 225 amp swordfish which has built-in data logging and all that stuff and a bec yeah swordfish 225 amp is the bomb that's what I want to get eventually but right now im not in the market for it and I'm just going to use that regular fly color 120 ESC. I'mma throw that bad boy on there and let er Rip taterchip. Of course the main thing I'm going to be doing is checking attempts and keep an eye on the Temps like I said I got two coolant lines running now so I think if I keep it good and cool it should be all right long as I just don't run it wide ass open the whole time play with the prop a little bit and I think I should be good I bought one of those carbon fiber props seem like it's doing pretty good. Hey man I really appreciate you looking into it though for me really. I don't know if I asked you but do you have like a little GPS you put in your boat or just use your phone to check your speed or do you have a Data Logger?
Hey man it's Russ. I finally got my TP motor in it and that damn thing stupid fast compared to what it was I watched your whole build damn it looks good you keep your wires all nice and tight same way I do what size bullets are you running on your motor and your ESC is that 5 mm or bigger? I know one thing now if I have to buy an ESC or motor it's going to come with s*** soldered on her cuz I'm not worth a damn at that I keep getting bad connections and then it getting hot but I don't know need to go to school and soldering I guess. I don't have any connectors on it now I got a soldered straight together LOL I'm running that Graupner k-series 45 mm grp-2317.45 had to get the bigger Drive dog to accommodate it and change a little bit of my Flats on no drive shaft there but it hauls ass. It might be a little much on the prop side but I just kind of like run it for a minute and back off and let it cool down. I'm going to get a electric cooling pump to go along with it I made a ESC mounting plate with a heat sink mounted to the back of it that's also water cooled all custom and of course I got two coolant lines one for the motor and one for the ESC now both coming up out of the trim tabs not out of the rudder itself looks kind of cool not sure on my speed yet but I'm still running to 120 ESC so it can't be too fast but compared to what it was it's real fast. I'm running a fst6 Fly Sky transmitter taking a minute to get to use the driving sticks but you got a lot more adjustments on it though oh that motor again I think was the TP 3640 2100kv on 6s which ends up being like a 70 mm long motor. Crazy the way they size their Motors and stuff but that's what it is. Anyway it's 100 Amp Max 1350 watt continuous 2800 Max I think it's what it is. Finally got up to some kind of speed though. Anywho thanks again for all your help that you gave me I'm enjoying the heck out of this thing. Oh I put a auto bailer on the back of it of course and installed some weather stripping on top so I don't have to run any tape anymore it doesn't get wet at all I can push it completely underwater and hold it and nothing gets in. Cuz I was sick at all that taping nonsense all the time that had to go Because by the time you got it back in from running it hard and to go to check your temperatures this already cool back down not anymore brother
Hey Russ!! Good to hear from you!! Im so glad I could get another person passionate about this great hobby.. looks like you have been doing your homework on your boat. To answer your questions I use 5mm bullets. I have a crap video about how to solder I'll send you the link. The TP motor sounds awesome. I like tp motors I may have to pick one up. I would love to see a video on your boat.
Here is the how to solder video. ruclips.net/video/Xx9orj0GjGA/видео.html I had a chance to get the gps on the pursuit and I got 67mph out of it with my setup on this video.
Подскажите пожалуйста что такое KV в чем отличие 500KV и 2000 KV
KV Is revolutions per minute per volt. So lets say we have a 2000kv motor and we are using a 6s battery that is 22.2 volts.
2000kv ×22.2 volts =44,400 revolutions per minute. A 500kv motor on 6s has 11,100 revolutions per minute. If the 500kv motor and the 2000kv motor are the same size then the 500kv motor normally would have more torque. When you pick a motor for your boat you want a good mix of both speed and torque. Too low kv is slow too high kv too much heat. You also have to get a big enough motor to keep it cool a can size that is too small for your application will get hot. Thanks for watching!!
@@stevesballisticrc8770 спасибо большое 🙏 очень сильно помог , хочу купить мотор leopard 2200kv какой покупать регулятор ?
Niceeeeee set up !!! which 6S batery are you using...how many mah ? and how many mins running time will it have with that 2000 kv motor running it hard ? thanks
Hey Eduardo! Thanks for watching I feel honored! I use Turnigy Graphene 6s 6000mah 60c. Run time isn't long 3.5-4 minutes. Yes it runs hard but temperatures are usually good.
@@stevesballisticrc8770 thank you steve ! the honor is mine.
i have a vary fast and fun to drive ariane...watch "ARIANE SPEED DEMON PART ONE" AND "ARIANE SPEED DEMON PART 2 " it also uses a spektrum 2000 kv motor and a spektrum firma 160 amp esc. 6S 6000 mah batt... running time is 3 mins exactly runing it very hard as you can see in these 2 vids...V shape boats have a lot more resistance to the water than a catamaran.
@@eduardonessim4499 have any problems with your 160 esc?
Hey man Russ again I just bout got everything from my pursuit to get in the water for the first time. Again. Nobody ever talks about servos what kind of high torque Servo should I use?
Hey Russ! You have many to choose from but I would recommend Savox steel gear digital steering servo. I use Savox on all my boats they are strong, fast, waterproof and dependable. Reefs is also a great servo.
Hi my friend. Did you do another layer of carbon fiber on the inside or some kind of sealer?
Hey Russ! Did you get your prop? Is she running good? I have a couple layers of epoxy on the inside bottom of the boat and I also have a aluminum brace glued across the top where the hatch opening is.