Quick weld up and its up again, here in the states is hard enough to find parts i bet you a few welds are more cost efficient than a whole new gear that size. Gotta stay on the road aint no time to wait on parts i bet you those welds got them to their destination and their paychecks 🤷🏻♂️
Le kanabi. Le kif🌿🌿🌿. Le hachich. Le kharchach. ça donne le plaisir de travailler de cette façon. Sans aucune protection. C’est pourquoi ces pakistan 🇵🇰🇵🇰🇵🇰 travaillent de cette façons. Avec les habilles de nuit et par terre. Comme des esclaves.
Consider for a moment the amount of force it took to break that gear now picture that weld holding, it's not going to. The result of this patch up will be total differential distruction. I would give them an "E" for efford because they did make it "look" good.
Так и хочется спросить как в известном меме: «А чо, так можно было?!!». Хорошо, что такая «восстановленная» техника по земле ездит, а не в воздухе летает 😄🙈
So many problems with this repair , for starters they grind the tooth and spray sparks all over the good teeth , then arck weld without pre heating the complete part , then allow welding splatter to splatter all over the good teeth , but there is so many more issues and I can't be bothered writing a long list
11:20 приношу свои извинения по качеству изделия! Чутк показал как он замерил точность, шероховатость и отклонения от размеров!!! Вопросов быть не может!!!
LOL, this was obviously a practical joke video... In reality they repaired it by gluing a 3D printed PVC part and it has been holding fine to the stress ever since because you know it's not like these things are made of high strength heat treated steels for a reason ... I especially loved the "meshing test" at the end where he rolled a hypoid pinion at a near right angle on it
@@gabrielraya7472 There's no way the gears are meshing properly. You can't just guess and grind. There's no way the repaired teeth are hardened properly. I appreciate the need to make such repairs and the hard work, but I don't believe it lasted very long unless you take it apart again and show that it's working okay.
They are the worst owners of vehicles that I've ever seen. Every video I've seen of rear ends to gear boxes has severe damages. I'm 51 and have never seen these types of damages in my whole life.
Данный вид восстановления Главной пары называется-"В последний путь"
Nice to see a shop specialized in making repeat customers.
Он как парикмахер, эвольвентный профиль выводит болгаркой 😁
Without hardening process is not strong.. Maybe 2 weeks broken again.
Quick weld up and its up again, here in the states is hard enough to find parts i bet you a few welds are more cost efficient than a whole new gear that size. Gotta stay on the road aint no time to wait on parts i bet you those welds got them to their destination and their paychecks 🤷🏻♂️
Yeah until welds start sending shavings throughout the axle tube and destroy everything. Cost effective for dodgy mechanics who rip off customers
Пипец!! Неужели ЭТО! будет работать?До первой серьезной нагрузки!?🧐😵💫
Во времена Архимеда, винты все делали вручную. И работало многие века.
@@Wwladislaw истину глаголишь - у меня колесница до сих пор бегает на гранитно-деревянном диференциале...
Those repaired teeth will fall off when loaded!
Thanks my brother
Nothing less than perfection! Outstanding!
Yeah, it will probably make it to a garage where they can replace the ring and pinion.
Зачем такие бессмысленные телодвижения перед сдачей на металлолом??
Good work
repair style: "the driver on the last journey"
No new parts , no money to buy them. Give him credit for trying , as soon as a load is put on those gears it might burst the differential.
Joss 👍🏻👍🏻👍🏻👍🏻👍🏻
Гипоидное колесо изготавливают по 7 квартету точности! Как такую точность получить болгаркой в дрожащих руках??
он же показал, прокатив по зубьям второй шестерней...
Amazing job I like it
Perca de tempo não aguenta
@@silviodranka3732 Isso mesmo, às vezes você tem que acordar no Paquistão
obrigada
nice job :)
Просто СУПЕР
Кто хает пацанов ошибаются.Вот вам таблетка от кризиса перепроизводства.Все и всегда при деле.Учитесь.
Nunca mais fica igual, depois da solda impena tudo.
У этих хоть станок есть, их друзья когда хвостовик наваривали там вообще трэш!!🤣🤣🤣
Походу левую ерунду делают. Там видно что деталь имеет термообработку серьезную. В ихних условиях это не выполнимо. Брак. Лишбы что-то приварить.
Le kanabi. Le kif🌿🌿🌿. Le hachich. Le kharchach. ça donne le plaisir de travailler de cette façon. Sans aucune protection. C’est pourquoi ces pakistan 🇵🇰🇵🇰🇵🇰 travaillent de cette façons. Avec les habilles de nuit et par terre. Comme des esclaves.
Consider for a moment the amount of force it took to break that gear now picture that weld holding, it's not going to. The result of this patch up will be total differential distruction. I would give them an "E" for efford because they did make it "look" good.
It will work for their machinery doing 5mph on a field plowing crop.
Жду момента когда им дадут флягу пару вёдер и они спутник запустят в космос
Так и хочется спросить как в известном меме: «А чо, так можно было?!!». Хорошо, что такая «восстановленная» техника по земле ездит, а не в воздухе летает 😄🙈
Что вы все как маленькие дети они просто деньги на контэнте зарабатывают тут ясно что это при на грузках не выдержит
Хорошая работа
Ты реально так считаеш???!🙈🙈🙈
pregunta que tipo de aporte usa 11018 o 8018 muy buen trabajo
Battle field mechanics
Если не использовать, то пойдет!
Отпуск, закалку детали я просмотрел?...
It's necessary pre-heat gears before welding?
Какой же херней они занимаются. что такое металоведение они ниногда не слышали.
Kawat las nya jenis nya apa
So many problems with this repair , for starters they grind the tooth and spray sparks all over the good teeth , then arck weld without pre heating the complete part , then allow welding splatter to splatter all over the good teeth , but there is so many more issues and I can't be bothered writing a long list
11:20 приношу свои извинения по качеству изделия! Чутк показал как он замерил точность, шероховатость и отклонения от размеров!!! Вопросов быть не может!!!
Cero seguridad¡¡¡.
Si hubiesen argentinos trabajando allí, serían los más burocráticos del mundo.
Это что бы до свалки доехать?
😵💫😵💫😵💫😵💫🧐
LOL, this was obviously a practical joke video...
In reality they repaired it by gluing a 3D printed PVC part and it has been holding fine to the stress ever since because you know it's not like these things are made of high strength heat treated steels for a reason ...
I especially loved the "meshing test" at the end where he rolled a hypoid pinion at a near right angle on it
How long will this last
That might let the truck make it to a garage to get the ring and pinion replaced.
That ring and pinion is still going to this day sir
Has not failed again
@@gabrielraya7472 There's no way the gears are meshing properly. You can't just guess and grind. There's no way the repaired teeth are hardened properly. I appreciate the need to make such repairs and the hard work, but I don't believe it lasted very long unless you take it apart again and show that it's working okay.
They are the worst owners of vehicles that I've ever seen. Every video I've seen of rear ends to gear boxes has severe damages. I'm 51 and have never seen these types of damages in my whole life.
А что так можно было?
I SAW THIS ALREADY
Thanks for again watching friend
@@paktech9707 bahi in ka number send kra man b kam krn ha
It will make a noise for sure
If that is a mild steel weld as it would seam then he has wasted his time, it may look good but soft metal teeth with not last a week.
for sale, vehicle, brand new pinion and ring gear, here is a picture of it!!
No way is not goin to work !
No way is not goin to work
This is ridiculous.
Amazing ripoff artist ...
Totally useless work
Good work