Good advice, ive done the same with a gopro, though even easier. It was just the battery connection both on the batt and in the unit. Took alcohol on a brush and went to work. Bought the gopro for $40 and had it running in 5 mins
Nice video. Thanks for also explaining each part. I've pulled apart my Mini2, but the main board isn't turning on yet. Going to give it the alcohol wash tomorrow!
Thanks for watching so glad u like it hopefully u should fix the drone pls feel free to reach out to my social media handle for any difficulties ok thanks and don’t forget to subscribe and like the video 🙏🙏🙏👍👍
Thank you. Fascinating to see what is in it and how to deal with the tiny wires. Very educational and practical. Like the music, the tone, the video of the repair - this is inspiring.
U are very welcome Jim ☺️ so glad it was helpful and don't forget to smash the subscribe button and hit the bell icon for notifications so when we upload a new video u will be notified. 🤗😊👍🙏
This is a very informative video. I also crashed my Mavic Air 2 last weekend. But I can't open it yet coz I still don't have tools (already ordered at amazon). Though, I immediately put the drone under the sun after I crashed it and I've been blowering heat on it everyday. I would surely ask questions once my tools will arrive. Thank you in advance. I'm your new sub by the way.
Thanks Zairus so kind of u and welcome to Ezee media. so chat me up when ur tools arrive i will be very pleased to help. you can chat me up on instagram ok looking forward to assisting you. cheers
U welcome David so glad u found the drone and follow the steps in the video and that should fix it u can also check out the other videos for additional options ok. Thanks for the comment and pls don’t forget to subscribe for more amazing contents 🙏🙏🙏🤗
Oga Sir, Few months ago I asked a question in comments section. you said I should send my damaged Drone pictures through your Mail you'll help me check the solution but sir till now almost 3 months I didn't hear from you after sending. Please look into my situation Thank you sir
Thanks Thiago for the comments. I know right ☺️ it seems really hard to fix the drone but when u start it will become easy trust me. And u have to tell ur self that u can do it too 😉. Hope u subscribe for more amazing fix and contents 👍🙏🙏🤗😊
So sorry for the crash 💥 pls watch the crash videos and u should be able to fix it easy and don’t forget to subscribe for more amazing contents. Feel free to chat me up on my social media handles if u have any repair questions. Thanks 🙏 🙏🙏🤗🤗
The components are still damp and coaxed u need to flush the panels with ipa solvent follow the video to fix it. Let me know when u do and the result bruh 😎
I have crashed my mini 2 drone into fresh water, I simply dry it with a blower for how many hours. I tried to turn it on and it works like nothing had happened, do I still need to clean it up inside?
Hello Ruel thanks for the comment well if the drone is working fine I will suggest u keep using it that way no need to open it up ok 👍 thanks again and pls support the channel by subscribing 🤗🙏🙏🙏👍
Hey Vishv no there are not the same. There are different. Hope this answers ur question please don’t forget to subscribe and like the video thanks 🙏 🙏🙏🙏
Mine fell into salt water, more precisely into the sea, I took it apart, cleaned it, put it back together and it doesn't work. can you tell me where the problem could be. I looked at all the components and basically everything looks ok.
My mavic 3 drone crashed into the water. I immediately removed from the water, turned off the battery and put it in the sun until the water dried up. Once the service was done, there were no technicians in India (Hyderabad). Currently it takes 2 days. Can I turn it on? Please tell me any solution sir
I crashed my mini 2 in salt water then I cleaned everything now it powers on but wont connect to the controller or the dji fly app any ideas what could be wrong
Hey Armando thanks for the comments. Here is what I think is the issue probably u didn't clean the main board properly or u are not pairing the mini 2 right. I will suggest u clean the main board again with clear alcohol and try again and make sure u pair the mini 2 rightly. Pairing the mini 2 u need to click pair drone on the dji fly and hold down the power button until u hear the beep sound then the mini 2 should connect. If this works let me me know by replying and don't forget to like this video and subscribe for more contents 👍🙏🙏🤗
@@EZeemediaok im gonna try to clean the main board again but I noticed when I hold down the power button I never get a beep sound to pair the controller I also noticed when I try to power off the drone it wont power off unless I remove the battery
@@EZeemedia yes I tried it but it doesnt work. It says aircraft not connected to rc. Can you please help me figure out w/c shall I replace the esc or gps module?
Only criticism is that you sped up bits when prying the drone apart etc. and your moving the drone out of shot too many times I couldn’t see half the stuff you were talking about, so stopped watching by 3.11…..shame!
Hello drcues I understand ur frustration my friend, you see I have made previous videos on repairing the dji mini 2 and had a detailed showing of tearing the drone apart and similar steps in took in this video so pls watch those video for those steps. And if u are trying to fix ur crashed drone feel free to chat me up on my social handles I will definitely help u out. I have help a dozen of my subscribers thru that medium. My friend if u have started a RUclips channel u will understand the hassles in making a video but nevermind I am here just to help u guys out ok. So don't shame my efforts instead show some appreciation and stay blessed.
Sorry, telling us what you're doing and then shaking the board at us isn't showing us anything. Place the boards or quad on the bench and then focus the camera on it and let us see what you're talking about. Next you're telling us to remove things but never showing us what you're talking about. Please don't use fast forward on a tutorial and remember You already know what to do, WE DON'T and you're supposed to be teaching us. Did your teachers do everything at triple speed? I doubt it/ Watch how the popular RUclipsrs make a video and perhaps you'll learn how to teach others. Good luck.
I believe There are hundreds of videos out there on RUclips that u will find more accurate that will help u. That’s for spending ur time for the feedback much appreciated 😊
My mavic 3 drone crashed into the water. I immediately removed from the water, turned off the battery and put it in the sun until the water dried up. Once the service was done, there were no technicians in India (Hyderabad). Currently it takes 2 days. Can I turn it on? Please tell me any solution sir
IT WORKED!!!! Thank you, sincerely🙂
The speaker isn’t working but I don’t think that’s important:)
Good advice, ive done the same with a gopro, though even easier. It was just the battery connection both on the batt and in the unit. Took alcohol on a brush and went to work.
Bought the gopro for $40 and had it running in 5 mins
Thats awesome Henry Thanks for dropping by pls dont forget to subscribe for more content and smash the bell icon for notifications. Thanks 🤗🙏🙏🙏
Awesome video mate. Exactly what I was looking for. Drowned my mini 1. She was under water for 3 days. See how we go 🤞
Did it work. A bird just crashed mine. Its under water. A fireman will dive for it tomorrow 😢
@jacobcamacholopez it will work if u just follow the steps on the video wish u the very best in doing it ur self pal !
I just got the top off what alcohol do i use? Ok i found it. TY
Nice video. Thanks for also explaining each part. I've pulled apart my Mini2, but the main board isn't turning on yet. Going to give it the alcohol wash tomorrow!
Thanks for watching so glad u like it hopefully u should fix the drone pls feel free to reach out to my social media handle for any difficulties ok thanks and don’t forget to subscribe and like the video 🙏🙏🙏👍👍
Hey man thank you for the video. How can I reach out to you? I have some questions regarding the battery. Thanks again
Reach me on instagram
Thank you. Fascinating to see what is in it and how to deal with the tiny wires. Very educational and practical. Like the music, the tone, the video of the repair - this is inspiring.
Awwww 😊 thanks so much Janet🙏🙏🙏👍I really appreciate and so glad u liked it 😊. Pls stay connected for more amazing content. 🙏🙏🙏🤗🤗🤗
I learnded a lot to ur video vlog.
Thank u ang more power.
Happy to help!
Pretty easy to unlock the top shell properly the most difficult part as you fast forward the clip lol
Very nice info!i tried it as well but its still wont power on 😮💨,im planning yo buy a new power board!any suggestions what will i do tnx.
Thanks John for the comments you can shoot me a msg on FB so I can assist u and don't forget to sub so u get get more detailed tutorials thanks 👍🙏🙏🙏
Hi! Do you know how to repair displayed message ''non dji battery detected'' after Mavic 3 water damage?
I believe u have to get a new battery
It works
Very informative video thank you so much
U are very welcome Jim ☺️ so glad it was helpful and don't forget to smash the subscribe button and hit the bell icon for notifications so when we upload a new video u will be notified. 🤗😊👍🙏
I just did my mini2 se thank
You welcome good to know
This is a very informative video. I also crashed my Mavic Air 2 last weekend. But I can't open it yet coz I still don't have tools (already ordered at amazon). Though, I immediately put the drone under the sun after I crashed it and I've been blowering heat on it everyday. I would surely ask questions once my tools will arrive. Thank you in advance. I'm your new sub by the way.
Should I use this MG Chemicals 99.9% Isopropyl Alcohol Electronics Cleaner (liquid) or should I use their aerosol version? Thank you for your answer.
Thanks Zairus so kind of u and welcome to Ezee media. so chat me up when ur tools arrive i will be very pleased to help. you can chat me up on instagram ok looking forward to assisting you. cheers
Hi Tryed that and it still not power on. Any thought. Great content.
Hello friend thanks for the comment pls msg me on my Instagram handle so I see what the problem is
What about cloured alkohol?
I would recommend colourless one
Thank you, I was concerned after picking my drone off the bottom of a lake in waist deep water. BTW the GPS led me right to the drone.
U welcome David so glad u found the drone and follow the steps in the video and that should fix it u can also check out the other videos for additional options ok. Thanks for the comment and pls don’t forget to subscribe for more amazing contents 🙏🙏🙏🤗
Oga Sir, Few months ago I asked a question in comments section. you said I should send my damaged Drone pictures through your Mail you'll help me check the solution but sir till now almost 3 months I didn't hear from you after sending.
Please look into my situation
Thank you sir
Hey Musa so sorry I didn't see the pictures message me on instagram when I read this so I know thanks 👍
not that easy, but very nice to see you fixing
Thanks Thiago for the comments. I know right ☺️ it seems really hard to fix the drone but when u start it will become easy trust me. And u have to tell ur self that u can do it too 😉. Hope u subscribe for more amazing fix and contents 👍🙏🙏🤗😊
My mini 2 crashed in the ocean and now it won't charge the battery after cleaning. Red light flashed, while LED 1 stay on constantly😒
So sorry for the crash 💥 pls watch the crash videos and u should be able to fix it easy and don’t forget to subscribe for more amazing contents. Feel free to chat me up on my social media handles if u have any repair questions. Thanks 🙏 🙏🙏🤗🤗
How about after the crash the drone is already dry for a few days But it’s just turning on the led light. What is the cause?
The components are still damp and coaxed u need to flush the panels with ipa solvent follow the video to fix it. Let me know when u do and the result bruh 😎
I have crashed my mini 2 drone into fresh water, I simply dry it with a blower for how many hours. I tried to turn it on and it works like nothing had happened, do I still need to clean it up inside?
Hello Ruel thanks for the comment well if the drone is working fine I will suggest u keep using it that way no need to open it up ok 👍 thanks again and pls support the channel by subscribing 🤗🙏🙏🙏👍
Dji mavic mini se or mavic mini same motherboard?
Hey Vishv no there are not the same. There are different. Hope this answers ur question please don’t forget to subscribe and like the video thanks 🙏 🙏🙏🙏
Can fix my hover x1 drone ...can help
I don't fix hover x1 drone
I did clean everything but after assembling and powering on, It got stuck with only 2 leds, leftmost and rightmost leds, were on. How do I fix this?
Hello Vanie link up on my social media handles. Chat me up on FB or Instagram
Hey Vanie, could you solve this issue? I have exactly the same problem
Fantastic video! Super informative, very useful, and poetic on top of that!
Thank you so much Tata so glad u like it pls stay connected by subscribing for more amazing contents 🙏🙏🙏🤗🤗
good it lived
Thanks 👍 much appreciation don't forget to subscribe for more amazing contents 🙏🤗🤗
Mine fell into salt water, more precisely into the sea, I took it apart, cleaned it, put it back together and it doesn't work. can you tell me where the problem could be. I looked at all the components and basically everything looks ok.
ps. I can't even charge it
My mavic 3 drone crashed into the water. I immediately removed from the water, turned off the battery and put it in the sun until the water dried up. Once the service was done, there were no technicians in India (Hyderabad). Currently it takes 2 days. Can I turn it on? Please tell me any solution sir
Try turning it on but if it doesn’t then u have to fix it
how much wil you charge me for fix mine? , I crashed my dji mini 2 in water
Hey buddy I don’t fix drones commercially so sorry about that I can only guide u to repair urs
@@EZeemedia it's hard for me
Where is ur location ?
@@EZeemedia Houston , texas USA
@@JorgedeLeonPhotographer oh ok but am in Toronto
I recently crashed mine in mangrove 😢
so sorry about that hope this video helps
I crashed my mini 2 in salt water then I cleaned everything now it powers on but wont connect to the controller or the dji fly app any ideas what could be wrong
Hey Armando thanks for the comments. Here is what I think is the issue probably u didn't clean the main board properly or u are not pairing the mini 2 right. I will suggest u clean the main board again with clear alcohol and try again and make sure u pair the mini 2 rightly. Pairing the mini 2 u need to click pair drone on the dji fly and hold down the power button until u hear the beep sound then the mini 2 should connect. If this works let me me know by replying and don't forget to like this video and subscribe for more contents 👍🙏🙏🤗
@@EZeemediaok im gonna try to clean the main board again but I noticed when I hold down the power button I never get a beep sound to pair the controller I also noticed when I try to power off the drone it wont power off unless I remove the battery
@@Carisacarina if the problem persist after cleaning the board again then I will recommend u replace the main board.
I crashed mine in water. Problem is that it woulnt connect the rc
Did U try to pair it with the rc by holding down the power button ?
@@EZeemedia yes I tried it but it doesnt work. It says aircraft not connected to rc. Can you please help me figure out w/c shall I replace the esc or gps module?
@@bimmarvinlim3804 chat me up on my instagram handle
Sir how can send message to you i wanna talk about my drone please help me sir
Hey Syed how re u doing just following up on ur repair where u able to fix the problem?
easier for users to send them into you.
That will be nice if it's possible. I am open to fix my subscribers crashed drone if the need arises.🤗🙏👍
mine still not working
Hello friend what happened to ur drone
Only criticism is that you sped up bits when prying the drone apart etc. and your moving the drone out of shot too many times I couldn’t see half the stuff you were talking about, so stopped watching by 3.11…..shame!
Hello drcues I understand ur frustration my friend, you see I have made previous videos on repairing the dji mini 2 and had a detailed showing of tearing the drone apart and similar steps in took in this video so pls watch those video for those steps. And if u are trying to fix ur crashed drone feel free to chat me up on my social handles I will definitely help u out. I have help a dozen of my subscribers thru that medium. My friend if u have started a RUclips channel u will understand the hassles in making a video but nevermind I am here just to help u guys out ok. So don't shame my efforts instead show some appreciation and stay blessed.
@@EZeemedia..... I appreciate your time and effort making this tutorial videos..... thanks.
@@rrenegadoo awww thank you so much Rrene I really appreciate
Sorry, telling us what you're doing and then shaking the board at us isn't showing us anything. Place the boards or quad on the bench and then focus the camera on it and let us see what you're talking about. Next you're telling us to remove things but never showing us what you're talking about.
Please don't use fast forward on a tutorial and remember You already know what to do, WE DON'T and you're supposed to be teaching us. Did your teachers do everything at triple speed? I doubt it/ Watch how the popular RUclipsrs make a video and perhaps you'll learn how to teach others. Good luck.
I believe There are hundreds of videos out there on RUclips that u will find more accurate that will help u. That’s for spending ur time for the feedback much appreciated 😊
My mavic 3 drone crashed into the water. I immediately removed from the water, turned off the battery and put it in the sun until the water dried up. Once the service was done, there were no technicians in India (Hyderabad). Currently it takes 2 days. Can I turn it on? Please tell me any solution sir
Try turning it on if it can but if not I will have to follow the steps in my water crashed DJI to see it helps