thinset removal from concrete
HTML-код
- Опубликовано: 30 июл 2024
- DIY - thinset removal from concrete
- Shop vac - Ridgit 14 Gal 6.0-Peak - www.homedepot.com/p/RIDGID-14...
- Makita 195386-6 Dust Extracting 7-Inch Grinder Shroud - www.amazon.com/Makita-195386-...
- Makita GA7021 15 Amp 7 in. Corded Angle Grinder - www.homedepot.com/p/Makita-15...
- Makita A-96425 7 in. Turbo 24 Segment Diamond Cup Wheel - www.homedepot.com/p/Makita-7-...
- Dustopper HD12 - High Efficiency Dust Separator - www.homedepot.com/p/Dustopper... 
Хобби
Literally the best results to help with a project anyone has posted to RUclips. Just did my entire bathroom in 10 mins.don’t question it’s price just buy the parts you and your wife will be thankful 😀
"Congratulations you must be married" - 100% watching this because my wife want to remove the tiles and put down floorboards.
Lol , same here 😂
Same
Just happened to me as well. Here we go.
“Congratulations you must be married”… I am dead!! I almost spit my drink out… aaah shit man my eyes are watering! You called it🤣🤣😩
Thanks for the tips. I was hoping I could see you use it.
This is great. I'm 80% done with our removal & sds from harbor freight worked well...but so much dust😂🤣
I was waiting for you to go a demo I wanted to see the sander grinding away
I’ve never been able to get those dust shrouds to actually stop dust from getting everywhere in clouds.
I have to remove tile from the front porch on the house I just bought. Its slippery when wet and we get ice. Not sure how elderly people ever lived here. Its also broken in several spots.
Thanks for the video! What is the difference with using a PC5010C which is supposed to be more appropriate for that task? Is there any?
Dude! Thank you so much for posting. I have 500 sq ft of patio with heavy thinset and starting with a walk behind grinder and then escalated to a rotary planer/scarifier! And yes, I'm married! LOL Thanks for the dust separator idea.
Great advice
Thanks bro 🙏👍👍🤝
What size blade you use on that grinder?
Good tips
"congratulations, you must be married"🤣🤣🤣
With the set up you had showed us? Did the dust collector and vacuum remove all the duct associated with grinding? Or was there still a reasonable amount of dust in the air? I'm literally up against the same job and just trying to ball park how much dust there will be.
I would say it removed about 85% of the dust, I did cover countertops and cabinets with plastic and closed off the hallways with plastic to make sure I contain the dust. There was some dust on the plastic covers but it was a very thin layer. Good luck with your project!
How much time did it take to completely remove the thinset from the entire room with that setup?
About 2 days of work, the total area was about 600 sqft
2 day 1100 square feet
Would a 5" cordless angle grinder work alright also?
As long as you can find the correct vacuum attachment then I dont think it would be an issue, the thinset comes apart fairly easily. I guess it also depends on the size of the job and how much time you want to spend charging batteries.
Neighbours must love you! lol.
LOL yeah its loud for sure! but new home in a new community so everyone getting work done. I kept it within decent times of the day and talk to my neighbors on regular basis, no complaints during the demolition.
But you never show it working.
I am still laughing from the first 20 seconds in
how do you grind the corners?
Excellent question and I'm facing the same issue... If you may be generous enough to spare the time, could you share how you were able to do it?? 😭
I wouldve used a pneumatic chisel from harbor freight $130 and it wouldve been done in an hour tops. Alot easier and they are atleast 4 ft long so u dont have to be crouching. Pulls thinset up clean and fast.
You’d be there 5 times longer & put in 20 times the effort. Speaking from experience
Those pneumatic chisels suck man. Only thing I use it for is for small vct areas. Up to 200sqft or less
You need to post a video then. I did it and it is a nightmare without a vacuum system
@@donaldclemmons5980 I dont know if a pneumatic chisel is any more powerful than electric chipping hammers by Bosch's big ones or Makita's Medium sized ones, both of which I've used on commercial construction (structure shell form work for concrete pouring) for over 20 years, and HATED, for after a pour after the concrete is hard, cleaning off excess concrete around concrete column bottoms ( the base of a column where it adjoins perpendicular to a floor slab ) and would much prefer to grind it off. Mechanical Chiseling or Chipping is NO FASTER, don't believe a word from that post, it's torture on your hands, forearms, and wrists especially, when done repetitiously. Site foremen & superintendents know this and are leary that if/when a worker gets fatigued they may carelessly gouge the surface of a freshly poured slab at the base of a column and so they're always on your case to be careful about that, and that's exactly why I would prefer to use one of these instead. But they're set in their ways, and want to see a guy busting his tail earning his check, if they see a worker using one of these they'll portray it as if that worker is taking "the easy way out" blah-blah...etc etc.. Maybe on a "side job" , infrequently, once in a blue moon, mechanical chisel/chipping is tolerable, but for repetitious routine recurring work it becomes one of the reasons why workers doing that task start looking for other jobs/work.
You definitely need a vac with 25 CFM per inch of cup wheel diameter. That puppy looks like a 7 inch grinder, which means you need 175 CFM. This usually means hooking up two vacuums of 125 CFM with a Y connector. If you need help with the setup, we know a guy (we are the guy).
Hello! Happy i came across this comment. I am in the same boat and cannot afford to have dust. My wife runs a daycare and there must be minimal dust produced even if kids are not present during off hours. I have a 7' inch grinder as well. I look forward to hearing from you.
I take it that 'thinset' is the American word for tile cement
I believe that is correct. From Australia.
@@murrayshaw7539 It's called thin set in Canada too, probably called that everywhere if you're an installer
Thanks for not showing anything
No demonstration?
yeah i figured ill just explain the setup since grinding thinset is not as exciting but i guess you would want to see the level of dust if any. So on that, ill just say that I had very low to almost zero dust but you have to keep an eye on the dust separator bin, that puppy would fill up quick.
Your thinset looks really flat, you could have laid 3mm underpad and 12mm laminate and I think you would have been perfectly fine. What do you think ?
Bad idea. You'd at least want to patch over it first if you were going to do that, but it wouldnt be very even, so for click products you could run into some issues there, gluedown not so much
Too many segments for removing thinset. You want less segments for aggressive removal.
"Congratulations you must be married" indeed sir... indeed.
Lol yup married
"You must be married" Ha!
Lol nice intro
You must be married, so funny and true story!!!
hahahhaah you must be married hahahahah
Going to pass on this method!
why?
You must be married lol!
Yep, married...