Nissan navara rack n pinion

PTSA:
Maganit ba or less responsive ang manibela mo?
DIY fix np300 4x2-2018
(Nissan Navara/Terra, rack in pinion bushing issue)
Disclaimer: "I did it my way"
"I am not against Nissan engineering in any manner whatsoever, nothing on this post is pointing any faulty part/s of above mentioned vehicle"
Nor "I am risking someone's personal safety by suggesting to do the same to their own vehicle"...
The proper way to do this test is either,
Lifting the vehicle off the ground or while the vehicle is in motion, the bushing movement should be significantly less in that manner bec there will be less or no friction at all from tire to ground/road...
Bushing's premature excessive movement may vary due to: wear n tear, tire size/tread, wider stance 0 to - offset, spacers etc. compared to stock, over time bushings should be replaced pero karon budget fix lang muna😀, drive safe mga Boss! ty Admin....

[@MannixJr.1969]

procedure:
remove bash/skid plate, lossen undo RnP nuts, matanggal na nimo ang steel out washer og inner rubber washer nga nipis, kanang nipis nga washer maona akong gipa sukdan sa macshop og steelplate washer na 3/16 kabaga, maorana akong gibalik gibutang nko og glue ang outline, tapos nag buhat ko another rubber washer ayha nako gibalik ang stock steel out washer,,,,tools: 24mm socket or backwrench2x, nutlocker....
Pwde pud sukdan nimo ng stock bushing niya, pabuhat ka rubber bushing pero mubo lang maybe 1/4 or 3/8 maoy imong isuksuk ayha ibalik ang outer steel washer maotoy magpahugot sa stock bushing....pero pag try nako sa una nko nga idea nabawasan man movement sa RnP so, ok na...

[@MannixJr.1969]

procedure:
remove bash/skid plate, lossen undo RnP nuts, matanggal na nimo ang steel out washer og inner rubber washer nga nipis, kanang nipis nga washer maona akong gipa sukdan sa macshop og steelplate washer na 3/16 kabaga, maorana akong gibalik gibutang nko og glue ang outline, tapos nag buhat ko another rubber bushing ayha nako gibalik ang stock steel out washer,,,,tools: 24mm socket or backwrench2x, nutlocker....
sukdan nimo ng stock bushing niya, gawa ka rubber bushing pero mubo lang maybe 1/4 or 3/8 maoy imong isuksuk ayha ibalik ang outer steel washer maotoy magpahugot sa stock bushing....para mabawasan man movement sa RnP so, ok na...

[@brandobandit819]

Kumusta after a year sa imong DIY fix? All good ra gihapon?

[@MannixJr.1969]

@@brandobandit819yes paps! All goods pa gihapon! Thanks for watching!

[@MannixJr.1969]

PTSA:
Maganit ba or less responsive ang manibela mo?
DIY fix np300 4x2-2018
(Nissan Navara/Terra, rack in pinion bushing issue)
Disclaimer: "I did it my way"
"I am not against Nissan engineering in any manner whatsoever, nothing on this post is pointing any faulty part/s of above mentioned vehicle"
Nor "I am risking someone's personal safety by suggesting to do the same to their own vehicle"...
The proper way to do this test is either,
Lifting the vehicle off the ground or while the vehicle is in motion, the bushing movement should be significantly less in that manner bec there will be less or no friction at all from tire to ground/road...
Bushing's premature excessive movement may vary due to: wear n tear, tire size/tread, wider stance 0 to - offset, spacers etc. compared to stock, over time bushings should be replaced pero karon budget fix lang muna😀, drive safe mga Boss! ty Admin....