I can't express how happy I am to see you in the Chevy family and to top it off by taking on a project many have strayed away from in drifting good job bro :)
Mad Hill haha, mine's a daily drifter, so I'm kinda in the same boat :D I currently have a pair of Style 5s on the rear as drift burners, though. Definitely my 2nd favourite BMW rim
Hey Taylor, great video as always. Just remember that you shouldn't put your hand on a chrome socket while hammering away on an impact wrench. Just looking out for you buddy
Been watching your videos for a couple of days and I really love your editing, best part about it is the music. Amazing stuff, looking forward to this build so much :)
I admire the amount of hustle you put into youtube, working at a full time job and creating and editing these videos on a daily basis at an amazing quality is remarkable. Keep up the good work Taylor!
So you want to take a decent car, goober up the suspension with extreme camber so it runs on just a fraction of a tire surface but want tires with a wide traction surface. Explain how any of that makes sense?
spudrubble Camber adds grip when turning (to a certain extent) so when he is drifting he will be turning his front wheels most the time so camber gives him more grip
spudrubble the reason for all the camber up front is so that when the wheels are at full lock, the camber changes due to the angle of the wheel and he will have a greater contact patch which means more grip. The back wheels probably wont have much camber if any, depends how much grip he wants. Hope this helped a bit.
I had a 99 Camaro that needed a new wiper motor. My father and I ended up not adjusting it correctly and the wipers ended up sticking up just like yours when on intermittent mode. About an hour of research and adjustment got it working perfectly. The wiper motor was also identical for the Camaro and Corvette during that generation. Hope this helps.
The windscreen wipers do that so that you can change the blades because they tuck under the bonnet when they are down. car I drove for a while did the same, would do that if the wipers were on before turning the car on or something.
Honestly. The Corvette wants to hook straight. That's how it is designed from Chevy. To overcome that will be quite a feat! I'm looking forward to seeing that. But, I will say BE CAREFUL TAYLOR!! I know you love your new car bro! I had a C5 so I know how they drive / drift. It's going to happen out of nowhere. When you least expect it. When you are at your most confident. The car will snap back to the opposite side when you least expect it! Sometimes slowly, sometimes faster than you can do anything about. Especially if you add grip with a wider stance. I'm not telling you how to live, just to be ready when the car goes off on its own and you need new wheels and rockers and oil pan and trans pan.....ask me how I found out! (Videos are so much better lately!! Keep it up buddy!)
taylor ray that noise u heard was the rear brakes no bigging just replace check inside rear pad if its a 1/4 in replace with good new pads. not cheap ones but im sure the brake upgrade video soon we hope... cant wait to see it with rims.
I hadn't watched the entire video, I just saw you mentioned some of them already.. Anyway, loving the quality of your videos! They're looking awesome :)
With the spacers offset will be -1 in the front. Also the new wheels for the rear will actually poke less the barrel will be bigger and may not clear inside
That Corvette is going to be one super fast drift car in the future. I can see that thing needing some serious skill if you ever make more power and have it dialed in.
Good lord I love seeing someone actually jacking a C5 up by the proper jacking points, every time I watch Tyler Fialko I cringe when he blatantly lifts the car wrong.
What are your thoughts on super/turbocharging the corvette? I know I would love a supercharge install video, would probably give you some extra mad smooth power too
I want to keep it NA for reliability/simplicity's sake. I would rather have a 400hp car that works every time I turn the key, than an 800hp car that works half the time.
"I want 9.5inch so they poke more and so I have more clearance inwards" but yeah, they get wider inwards as well, so going for a 9inch but lower ET must be better...?
Hey Taylor love the style 32 rims! I have the same on my e46 but the fronts are 8J with et20 and the rears are 9J and it's just the best size for the money imo. Just make sure you use spacers that have the same central bore as the style 32 - 74.1mm or you're going to have a bad vibration over 80 km/h. And don't ask how I know.
lol you searched for the wrong thing.. Thrush is a old exhaust company that has been around for 50 years. The woodpecker on her hoodie is their logo.. But sorry for the confusion.
Dude the joke is old it's been in almost every corvette video Taylor has put up. Drop it. You aren't funny because you try stealing someone else's joke
Jack Arse i used to have an 89 hardbody it was fun until i seized the engine. Iv got a 86 mazda b2000 now i plan on turning into a drift truck. I have a 350 smallblock with a 4 barrell carb n rv cam in my motorhome i plan to put in the mazda. Or my alternative dream would be a turbo'd rotory swap into it but i feel like itd be to much work to keep up.
I can't express how happy I am to see you in the Chevy family and to top it off by taking on a project many have strayed away from in drifting good job bro :)
The production gets better and better
Put a big chassie mount wing on it, would look dope af!
Leave that boy alone hahaha
GnarlyLasagna - Haha you got the reference😂
For the love of god do not put ANY wing on it,
Another vid so early?? Wasn't expecting that! THANK YOU TAYLOR!
There's no replacement for displacement!
Except RPM. Sometimes you need RPM. :)
AMBush Dri
i never tought that the styling 32 wheels from BMW fit on a Vette :'D
Style 32s are the best! I have a set on my E36, looks straight up sexy!
MarchuxProductions hell yeah
i have them on my drift e36 and my dayli e36 in germany ^^
best wheels except the RoD z0021
Mad Hill haha, mine's a daily drifter, so I'm kinda in the same boat :D
I currently have a pair of Style 5s on the rear as drift burners, though. Definitely my 2nd favourite BMW rim
My favourites are the style 365 or somethin like that 😂
Add me on facebook
"Marco Bardo Podesta"
Camaros share the same bolt pattern as a Corvette and I run BMW wheels too, they're sexy
Hey Taylor, great video as always. Just remember that you shouldn't put your hand on a chrome socket while hammering away on an impact wrench. Just looking out for you buddy
bad ass drifting bro 😃😎👍
JoeGo101 waz up nice vids
Thanks man! Can't wait to see how it does with some angle and a handbrake!
Taylor Ray indeed 😃😎👍
JoeGo101 yooo jr my fav vlogger!
"No, this is Mexi-Flush" lmao had me cracking up.
you've been killing these videos lately Taylor! I'll definitely keep liking since I can see the effort being put in man!!
Been watching your videos for a couple of days and I really love your editing, best part about it is the music. Amazing stuff, looking forward to this build so much :)
I admire the amount of hustle you put into youtube, working at a full time job and creating and editing these videos on a daily basis at an amazing quality is remarkable. Keep up the good work Taylor!
+Tyler Fans it's tough at times but I still manage to sleep and have a social life!
I vote for more Ashley nom nom nom
lol that wheel is a bmws style 32 17x9 +26. Those wheels came stock on the rear of my e39 540i sport.
So you want to take a decent car, goober up the suspension with extreme camber so it runs on just a fraction of a tire surface but want tires with a wide traction surface. Explain how any of that makes sense?
spudrubble obviously you've never done any drifting.
spudrubble Camber adds grip when turning (to a certain extent) so when he is drifting he will be turning his front wheels most the time so camber gives him more grip
spudrubble You might want to do your research about drifting before making nonsensical statements
spudrubble the reason for all the camber up front is so that when the wheels are at full lock, the camber changes due to the angle of the wheel and he will have a greater contact patch which means more grip. The back wheels probably wont have much camber if any, depends how much grip he wants. Hope this helped a bit.
spudrubble you must be new around here
I had a 99 Camaro that needed a new wiper motor. My father and I ended up not adjusting it correctly and the wipers ended up sticking up just like yours when on intermittent mode. About an hour of research and adjustment got it working perfectly. The wiper motor was also identical for the Camaro and Corvette during that generation. Hope this helps.
I really enjoy seeing John & Ashley in your videos!
Taylor, just want to say youre doing a fantastic job at keeping up with videos and giving us outstanding content! keep up the great work homie!
Why does Marco have no pants at 2:59 ???
+Friendly hahahahahaha!
Is the diablo supposed to be wearing pants ?
Why does Marco has no legs you mean
everyone makes that joke on my school when i wear my camo jacket... haha
Yeeyee
Chillest vids though! I love good vibe videos
Make my day and upload another one lol I'm hooked on this build 😩
Keep up the great content Taylor! Your upload is one of the highlights of the day
The windscreen wipers do that so that you can change the blades because they tuck under the bonnet when they are down. car I drove for a while did the same, would do that if the wipers were on before turning the car on or something.
Those looked like some big 15x8s lol
This guys, who ever write first under Videos... are the last in life!
Taylor is the best guy on RUclips
Taylor deserves more subscribers
Honestly. The Corvette wants to hook straight. That's how it is designed from Chevy. To overcome that will be quite a feat! I'm looking forward to seeing that. But, I will say BE CAREFUL TAYLOR!! I know you love your new car bro! I had a C5 so I know how they drive / drift. It's going to happen out of nowhere. When you least expect it. When you are at your most confident. The car will snap back to the opposite side when you least expect it! Sometimes slowly, sometimes faster than you can do anything about. Especially if you add grip with a wider stance. I'm not telling you how to live, just to be ready when the car goes off on its own and you need new wheels and rockers and oil pan and trans pan.....ask me how I found out!
(Videos are so much better lately!! Keep it up buddy!)
taylor ray that noise u heard was the rear brakes no bigging just replace check inside rear pad if its a 1/4 in replace with good new pads. not cheap ones but im sure the brake upgrade video soon we hope... cant wait to see it with rims.
Taylor keep it up with the sick videos!! love from the uk
Cannot wait to see this build complete!
Excuse me if you've already said this in some video (I'm a recent subscriber), but what other mods do you have planned for the Corvette?
I hadn't watched the entire video, I just saw you mentioned some of them already.. Anyway, loving the quality of your videos! They're looking awesome :)
With the spacers offset will be -1 in the front. Also the new wheels for the rear will actually poke less the barrel will be bigger and may not clear inside
That Corvette is going to be one super fast drift car in the future. I can see that thing needing some serious skill if you ever make more power and have it dialed in.
0:46… that nissan ute…. that needs to be a drift build… be different. that would be the sickest thing ever.
Hey taylor, look up tyler fialko's stanced vette you might get more info on the fitment with the wheels.
Taylor I like those wheels man! Especially the color and pattern...
You need a playlist for the videos with Ashley in them. She adds a lot to the videos. :)
Hey Taylor, I have a really clean set of SSR Type CH in corvette sizes with tires. I'm in college park. They're on Craigslist if you search for them.
ooooo, who got that sweet wrangler and rubicon back there
Taylor over here with his 1989 Stone wash New Kids On The Block pants ha ha 😂😂 keep up the vids. I'm liking the Vette
Hahaha I can't stop laughing all I could hear in the end of the video is catch me outside . It just keeps being repeated .
Good lord I love seeing someone actually jacking a C5 up by the proper jacking points, every time I watch Tyler Fialko I cringe when he blatantly lifts the car wrong.
MARCO!! :D
Marco's in a video!!!
i wanna see that hot wheels collection 7:03
Connor Folks I was waiting for this comment 😂
Is anyone else super excited to see the finish product of the corvette
wouldnt be a Taylor vid unless he rests on something and talks to us lol
This might he one of the coolest projects il watch😂
Aye Taylor!!! Style 32 wheels look so good! I had them on my e36. Try to get a squared 17x9.5 setup
I'm really interesting for this build, can't wait to see it going sideways in a track and tandeming for sure
When are you coming to the compound to drift? I live right down the street from it I'd love to see you drifting the Vette out there !
What are your thoughts on super/turbocharging the corvette? I know I would love a supercharge install video, would probably give you some extra mad smooth power too
I want to keep it NA for reliability/simplicity's sake. I would rather have a 400hp car that works every time I turn the key, than an 800hp car that works half the time.
those wheels are style 32's from some bmw they come in 17 and 18s x8 and x9.
Best outro music EVER!!! Look forward to that shit.
watch out Tj might steal this clip 😂😂
We need to see that sick hotwheels collection :O
9:40 "Thats all I wanted to do" *cuts to* "Lemme do like -just- another one, real quick."
I want to see how that lot looks in the day light XD
Drinking Yuengling, you're welcome.
- Pennsylvania
"I want 9.5inch so they poke more and so I have more clearance inwards" but yeah, they get wider inwards as well, so going for a 9inch but lower ET must be better...?
Are you going to get shortened knuckles to help with the angle or are you going to just modify the steering rack (if you can do that)?
Hey Taylor love the style 32 rims! I have the same on my e46 but the fronts are 8J with et20 and the rears are 9J and it's just the best size for the money imo. Just make sure you use spacers that have the same central bore as the style 32 - 74.1mm or you're going to have a bad vibration over 80 km/h. And don't ask how I know.
iceseekerr He's not getting Style 32 rims, he's just testing these for the fitment because they are the same fitment as the ones he has ordered.
But where did she get that thrush hoodie?
just searched thrush on google images
not cool bro, not cool
lol you searched for the wrong thing.. Thrush is a old exhaust company that has been around for 50 years. The woodpecker on her hoodie is their logo.. But sorry for the confusion.
allright thanks, didnt know that
Yo those wheels loook crazzyyyy good on the vette
You should put the Catless exhaust on it that it came with
Yo dude, what editing software do you use? Your content is lit, keep it up mate!
Yo Taylor I can't wait till u finish that corvette man that shit is gonna be a bad ass drift car
That thing is going to be a cool ass drift car.
Hey taylor, does your heads up display work in your vette? i haven't seen it on camera yet.
@taylor ray y don't u lower it on stock bolts
Hey Taylor you should LS swap your corvette
Conrad22 uh
Conrad22 Do you know what motor comes in that car stock.
Conrad22 Or...miata swap your LS.
Dude the joke is old it's been in almost every corvette video Taylor has put up. Drop it. You aren't funny because you try stealing someone else's joke
Would love a daylight drift! but you're a god! xD keep it up
Taylor your dads old corvette is one craigslist why don't you try to buy it back so you can have all of them in the family again?
Damn that BMW looks so raaaaad
those BMW wheels looked kinda sweet though
Hey taylor, when's the next OSW event? I want to come out to one and drift my car but I couldn't find a schedule list
+konnor briody go to osw driftings Facebook. It should be up there.
@Taylor Ray you should make some shirts with that logo it'll look sick
im goin to his hoow to drift clinic next week!
awesome! love the corvette! love from sweden!
I just noticed that the Cars Drifts Events intro isn't in the video
would you ever take parts out of the miotta for the vet
That car adds 40 years to you.
Looks like fun to drive!
Wheels look really good
My friend Ben's car as your background / screensaver on your computer right at the beginning though!
You need to paint this car like the drift c5 in Gran Turismo, the yellow, and black drift vette
hahha I see alot of people put the vette ninja star wheels on E36's but i never thought or people putting style 32's on Vettes haha, it works
Vette is clean af dude
The corvette is gonna be sick! 🙂
i has those same skinny jeans in high school lol people acted like i was a juvenile
Lakey Inspired is such a bae
Hey taylor you got the description wrong it's Sunday vibes not summer vibes all good tho 👍🏼
RUN the Bimmer wheels, they look dope. But change your pants.
I really hope the wheels you get are black, or at least anything besides chrome lol
Time for HCI and exhaust :)
Nice looking JKU on tons and coilovers.
thank you!
I drive a Nissan Hardbody just like the one by the door :)
Jack Arse i used to have an 89 hardbody it was fun until i seized the engine. Iv got a 86 mazda b2000 now i plan on turning into a drift truck. I have a 350 smallblock with a 4 barrell carb n rv cam in my motorhome i plan to put in the mazda. Or my alternative dream would be a turbo'd rotory swap into it but i feel like itd be to much work to keep up.
Hell yeah i want to make mine a drift truck too
do you plan on going wise fab in the future or do they not make it for the corvette
are you going to do a new exhaust system