How to Replace Fuel injectors 2007-2014 Chevrolet Silverado 2500 HD

Buy Now!
New Fuel Injector from 1AAuto.com 1aau.to/ia/1AFI...
This video shows you how to install new fuel injectors on your 2007-2014 Chevrolet Silverado 2500 HD. Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
Estimated installation time for a professional technician is approximately: 1 hour 24 minutes
This repair was done on a 2011 Chevrolet Silverado 2500 HD LT 6.0L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 2500 HD
2008 Chevrolet Silverado 2500 HD
2009 Chevrolet Silverado 2500 HD
2010 Chevrolet Silverado 2500 HD
2011 Chevrolet Silverado 2500 HD
2012 Chevrolet Silverado 2500 HD
2013 Chevrolet Silverado 2500 HD
2014 Chevrolet Silverado 2500 HD
Tools you will need:
• 10mm Wrench 1aau.to/oajY/1A...
• 10mm Socket 1aau.to/obTK/1A...
• 8mm Socket 1aau.to/obTK/1A...
• Fuel Line Disconnect Tool 1aau.to/oa3/1AX...
• Ratchet 1aau.to/ocmP/1A...
• Gloves 1aau.to/obuc/1A...
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@Firstoff-el1kj]

Great instructional video. One question I have is on the left side of the engine on the back left Bolt of the fuel injector rail there's an additional bracket that goes underneath it that's attached to the engine and it seems to be lifting my number eight and number six injectors a lot more than the others. Common sense says to remove the bracket and put it on top of the fuel rail but you never mentioned that rail and you would have to remove it in order to remove the fuel rail so I'm wondering if it's normal for the 6 and 8 injectors to sit higher...