PRINSU Roof Rack Install On My 2015 Subaru Outback

Поделиться
HTML-код
  • Опубликовано: 6 фев 2022
  • Prinsu, a company I have been hoping to work with for a few years now makes awesome after-market roof racks for overland vehicles. This rack was sent to me to fit my new 2015 Subaru Outback. This video shows the unboxing, building, and installation of the Roof Rack. Also in this video is some information on how to remove the stock rack, tips on how to seal the roof, and some tips on how to prep the vehicle for the rack installation.
    You can find Prinsu Products by clicking my Affiliate link:
    prinsu.com/ref/solidwoodworx/
    Tools Used:
    Milwaukee 12v Drill: amzn.to/3ruP2q8
    Torque Socket Set: amzn.to/3gp6lCS
    Socket to impact drive: amzn.to/3rtFV9l
    Hardware Bought:
    Bolt for the blank holes: amzn.to/3B0AXUC
    Washer: amzn.to/3ovgGkX
    Lock washers: amzn.to/3sjHBkZ
    Nuts: amzn.to/3B2bwBY
    GET 10% OFF SOLAR PANELS, INVERTERS, BATTERY CHARGERS, AND MORE!
    I've partnered up with RENOGY to get my SUBSCRIBERS a discount on the best solar products in the industry! To receive the discount follow this link renogy.sjv.io/NKoVkb then enter "SolidWoodWorx" in the coupon section for 10% OFF!
    ALSO, FOLLOW ALONG HERE
    / solidwoodworx
    / solidwoodworx
  • ХоббиХобби

Комментарии • 25

  • @paulschapman2037
    @paulschapman2037 Год назад +4

    Omg that a shot load of work for a rack

  • @walthuber4894
    @walthuber4894 2 года назад +1

    Thank you for the time you too to video this for us

  • @boqsean3500
    @boqsean3500 2 года назад +1

    thanks for the help! installation sucks on a outback willderness

  • @DannyridesMTB55
    @DannyridesMTB55 2 года назад +1

    Hey Love the vids and have been following you for a couple of years. I would like to find out more about your new van conversion company!! Thanks for your time! Good Luck with the new company!!

  • @RatelLaw
    @RatelLaw 2 года назад +1

    Thank you for sharing

  • @erniegarcia4724
    @erniegarcia4724 2 года назад +1

    Prinsu is awesomeness. I like mine. Many accessories for it. Enjoy 😉

  • @SpiritoftheWoods863
    @SpiritoftheWoods863 2 года назад +2

    Great video as always! What kind of lift are you running? At least the car looks lifted...cheers! 🇨🇦

    • @SolidWoodWorx
      @SolidWoodWorx  2 года назад +4

      2” lift by rough country. Did a full walk through video on the Subaru posting it soon

  • @easttennmike
    @easttennmike 2 года назад +3

    Wow that's a lot of work for a roof rack.

  • @jasoncarmichael2162
    @jasoncarmichael2162 2 года назад +2

    Still up in the air if I am going to buy this rack for my son's 2018 OB. The extra holes are a concern for leakage. What was the overall time on the install? Also, I cannot find a single video that shows the headache of reinstalling the headliner with trim.

    • @SolidWoodWorx
      @SolidWoodWorx  2 года назад

      Hey Jason,
      I have had m subaru in the rain and snow a lot in the last few months since installing the rack and no leaks whatsoever. And the reinstall was not that bad. I believe I could have done it all in 6 hours without filming.

  • @rayuchida2054
    @rayuchida2054 Год назад

    Nice video but did you make a mistake all your links to the fasteners, bolts and washers are all “zinc” they all gonna rust!

  • @NigelNaughton
    @NigelNaughton 2 года назад

    Nice rack but man....what a pain in the ass!! Looks like those crossbars flex a lot when you stand on them.

    • @SuburbanBBQ
      @SuburbanBBQ 2 года назад +1

      They are just generic aluminum extrusions. I wonder how long the anodizing will last. They get scratched easily too.

    • @NigelNaughton
      @NigelNaughton 2 года назад +1

      @@SuburbanBBQ yeah I recently got one for my 80 series Land Cruiser and already have seen scratches just from assembly.

  • @johnmiller4282
    @johnmiller4282 2 года назад

    Will the prinsu attach to a Yakima rail system?

    • @SolidWoodWorx
      @SolidWoodWorx  2 года назад

      I have no idea about that. But as you could probably see in my video i had to remove the stock rack to get this one on.

  • @stuartneal700
    @stuartneal700 Год назад

    How long did it take in the end?

  • @aarontimms6076
    @aarontimms6076 Год назад +1

    Does the sunroof still fully function with the rack covering it?

  • @petergozinya6122
    @petergozinya6122 2 года назад +1

    I hope it turned out ok.
    I started watching but quit halfway through due to the ads every 3 minutes. I don’t mind ads but when they are as frequent as they are in this video, it makes the content unwatchable.

    • @SolidWoodWorx
      @SolidWoodWorx  2 года назад

      Oh wow ya that is excessive I’ll try to make it less!

    • @SuburbanBBQ
      @SuburbanBBQ 2 года назад +1

      Same. I gave up. I may try it again with my ad blocker.