Always great to see tools back to full function! Just need to restore a set of mortis chisels. Small job but still beautiful. The custom epoxy art on the bolster was cool looking!
After a long and hard day both at work and at home, your video gave me the calm to go to bed peacefully. And fot that I would like to thank you. Watching you work and doing a great job, is always a pleasure. And congratulations on that handle, the upper part looks awesome!!
Упорство и труд! :))) даже просто глядя на вторую битую заготовку чуть не прослезился, представляю каково было вам! Приятно смотреть на вашу работу. Всегда интересно!
Nice work! I especially like how you adhered the cap to the handle. To say that's not going anywhere is an understatement! One question... after carving in the channel details into the handle, what did you use to get the black in there? It looked almost like a wire saw, but I couldn't get a good look. Thanks for sharing your work! Makes you appreciate cutting a mortise/tenon joint in the old days before jigs and drill presses.
I like the way the handle turned out. Great job bud!
A beautiful restoration of a very tired and abused looking mortice chisel into a tool that anyone would be proud to own and use.
Always great to see tools back to full function! Just need to restore a set of mortis chisels. Small job but still beautiful. The custom epoxy art on the bolster was cool looking!
Amazing restoration. The handle came out exspecially beautiful. Great job.
So super and great thanks
Шикарная работа. Инструмент получил вторую жизнь.
Браво!!!!!!!!!!!! у вас руки растут с правильного места так держать 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 ждём новых видео
Hola...gran trabajo amigo....me encanto como quedo el mango con madera y metal....
Good job well done great restoration enjoyed the video is great so much relax
Looks and works great. You did a nice job with restoration. 😎👍
Good work on the handle especially
Very nice, very good
.... thaaaaaat's a nice job - well done! I like especially the black epoxy on the handle.
Another great old tool saved from the scrap yard. Thank you, keep up the awesome work.
Отличная работа.
Молодец что говоришь по русски.
👍
Hello mister screws beautiful restoration good job well done my friend
Third time's a charm with that handle. What a beautiful job you did, I think it's one of your best so far! Very well done sir!!
Thank you so much!
Bringing back a damaged tool is always a good thing. Nice repairs and refinishing. Thumbs Up!
You sir, are a master.
muy buen trabajo señor gracias por el video.
Всё больше и больше новых технологий и техники) так держать) всегда интересно смотреть)
Spasibo!
Now that looks amazing!
Great work my friend! Nice chisel.
Awesome informational educational video experience Y'alls God Bless Ya 🙏 ❤
Like the crown detail on the ring.
very nice restoration of the chisel liked what you did with the handle very awesome job
After a long and hard day both at work and at home, your video gave me the calm to go to bed peacefully. And fot that I would like to thank you. Watching you work and doing a great job, is always a pleasure. And congratulations on that handle, the upper part looks awesome!!
Thank you very much! I am very happy to hear this and appreciate it!
Новый станок, - Поздравляю с приобретением! 👍
Eshe v proshlom godu v marte kupil, prostoi ochen no luche chem nichego, ia poka uchus) Spasibo za vnimanie.
Belissimo trabalho
É bonito de se ver as pessoas refazendo as coisas
Não tem preço
excellent travail bravo congratulation for you work
Упорство и труд! :))) даже просто глядя на вторую битую заготовку чуть не прослезился, представляю каково было вам! Приятно смотреть на вашу работу. Всегда интересно!
I'd be actually surprised if this was followed by a cooking segment using the chisel lol
Good work.
Nicely done - thank you! ✌🏻🎨☕️
Thank you for video.
This is a good chisel, work the work was worth it. Good luck you 🍀
Great job!
Pretty *awesome work* buddy 😊👍 *great* idea with *glue* looks like *resin* 😊
Looks great well done.
Que bien quedo, felicidades por el trabajo , un saludo
Excelente trabajo 👍 me gustó lo del mango pero salió bien bonito. . Saludos mi hermano desde Venezuela ciudad de Maracaibo
Как всегда отличная работа.
Sweet 👍🏻 👍🏻
Very nice job! I like the collar.
Enjoyed your video and I gave it a Thumbs Up
Once again, well done, sir
Beautiful !
Awesome once again.
great job👍
Great job, you are a master of your craft👍
Outstanding job! You do pretty work.
You amaze me the way you take rust and turn it into gold. Good job brother
Thank you)
Молодец! Теперь тиски отремонтируй! Спасибо за интересные ролики👍🏻
Да их давно пора, обязательно сделаю.
Amazing
Looks better then New mate , The handle turned out grate . :)
Great job, nice detail on the handle too 👍
Superb work. Thank you for uploading the video. (Nice glue board too)
Very nice.
Рукоять просто бомба 💣
Piękna robota
Good stuff man. Beautiful
Great work!!
Amazing! 🤩 I love this! Watching the saw go through the metal tube at that angle was so satisfying
Thanks ^_^
Замечательно!
Your shaft on the grinder is bent, it the grinding wheel is seriously out of round.
The end result looks fantastic!
Też lubię herbatę z cytryną.
Very good job
Very impressive 👍🔥
Good JOB!
so good and easy for you :D
Awesome Restoration! Well Done Mate! ✔
Love th the New handle.
Really nice job!
Класно получилось,Молодец.
Damn good. Looks great!
Man that’s nice!!
Good work 😉
Very cool!
Simplesmente Incrível
Упорство и труд👍, как же ты прав дружище.
Impressionante
Отличьная работа
Жду реставраций более больших предметов, а так видео отличное:)
Spasibo! ^_^
Fantastic work especially on that bolster of the handle. My only question is why is your Grindstone wobbling like that? Is it out of round?
It needs to be adjusted, I sharpened a lot of things on it.
Nice work! I especially like how you adhered the cap to the handle. To say that's not going anywhere is an understatement!
One question... after carving in the channel details into the handle, what did you use to get the black in there? It looked almost like a wire saw, but I couldn't get a good look.
Thanks for sharing your work! Makes you appreciate cutting a mortise/tenon joint in the old days before jigs and drill presses.
Hello, thank you for your attention. I do this with an ordinary iron wire. During the friction, the wood speaks and leaves this black color.
Muito bom !
Horohaiy rabota myzik)
Blagodaru!)
Muito bom ficou perfeito
Pozdrawiam serdecznie in Christo
Maybe one day you could do a restoration on your Vise?
Yes, I've been thinking about it for a long time.
я на таком станке подсвечник сделал еще очень давно)
Ia poka uchus. Net rezcov normalnix, ceni dikie na nix.
Неужели ты начал классно реставрировать? Красавец. Тебе нужно студию сделать нормальную
Ia staraus, ne vsegda konechno poluchaetsia idealno
👍
Надо было ударную поверхность защитить,что бы не разбивало рукоятку. Дружище, какой клей используешь?
Zdravstvuie, ia biu rezinovoi kiankoi. Klei dvux komponentni sensil
Me: No way he can restore this
Screws And Tools: Hold my beer
🔥
👍👍👍👍
супер!
Привет мастер сверху тоже надо было было поставить металлическое колечко чтоб не скололась рукоять когда лупишь молотком а там всё 👍👍👍
Soglasen, xo po rokoiatke ia tolko bil i budu bil rezinovoi kiankoi. Nadeus proderjitsia)
@@ScrewsAndTools но всё равно деды и отцы так делали и вшколе нас так учили хоть резиновая хоть деревянная киянкой
@@БорисБорисович-ы2л V sled raz obiazatelno dobavlu.
Before to use this millstone, you must to cut out the bundle with a diamond tool. That will be better.
I couldn’t quite work out where you were going with that at first. Turned out bloody lovely mate.
You should get a pipe cutter .
You should change your name to Screws N Tools