I'd say everything is pretty amazing about this WW issue except for the hideous and very visible neck joint (w/o the cape) & the cheap looking plastic cape. None of the promo/ad pics for this fig. (w/o the cape) showed that neck ball joint and none of the pics on the box show it either. Look at the up-close shots of the pics of each face plate in the promo/ad as all show the neck area & none show the ball joint. Are you sure the neck does not push down further into the body to cover up the neck joint? If not then gonna be a pass for me as I don't like the look with the cape on & unfortunately that's the only way to hide the neck joint ball (if not able to hide it by pushing the neck down into the body). As a result appears it's only an "Almost" Amazing WW. Thanks for the great up close shots & quality review.
I agree. The neck joint looks like it can be pushed down or else it looks hideous. Seems like he got a defective piece or the factory didn't assemble the figure properly.
My guess is that the factory accidentally put two necks that are supposed to be used with the Cape rather than one for standard display and one for caped display. Worst case scenario you can probably hide it by always using the Cape or by posing it so it's not noticable
@VNISHPT 70 Thanks for watched my video and Glad to provide you with reference. It's certainly not able to hide it by pushing the neck down into the body.But i found that if i made the neck joint vertical with body.It will be look batter than before.
I'd say everything is pretty amazing about this WW issue except for the hideous and very visible neck joint (w/o the cape) & the cheap looking plastic cape. None of the promo/ad pics for this fig. (w/o the cape) showed that neck ball joint and none of the pics on the box show it either. Look at the up-close shots of the pics of each face plate in the promo/ad as all show the neck area & none show the ball joint. Are you sure the neck does not push down further into the body to cover up the neck joint? If not then gonna be a pass for me as I don't like the look with the cape on & unfortunately that's the only way to hide the neck joint ball (if not able to hide it by pushing the neck down into the body). As a result appears it's only an "Almost" Amazing WW. Thanks for the great up close shots & quality review.
I agree. The neck joint looks like it can be pushed down or else it looks hideous. Seems like he got a defective piece or the factory didn't assemble the figure properly.
@@yashwanthchoudary7030 Yeah, hopefully a couple other reviews of this fig. will post soon to see if this is somehow an isolated issue with this copy.
My guess is that the factory accidentally put two necks that are supposed to be used with the Cape rather than one for standard display and one for caped display. Worst case scenario you can probably hide it by always using the Cape or by posing it so it's not noticable
the most ridiculous neck I ever seen~
@VNISHPT 70 Thanks for watched my video and Glad to provide you with reference.
It's certainly not able to hide it by pushing the neck down into the body.But i found that if i made the neck joint vertical with body.It will be look batter than before.
VERY COOL-thanks for doing the review!
博主明显有进步 支持
谢谢支持
脖子看起來奇怪是因為連接樁沒有擺放到位，連接樁要向後且跟脖子呈90°，類似馬尾的感覺，而不是像SHF一樣跟脖子垂直，這樣神奇女俠的臉會正好遮住一半的脖子，而且你依舊可以上下左右前後轉動頭部。
謝謝妳的建議 鏈接樁垂直部分是指與身體鏈接的那壹端還是與頭部鏈接的那壹端呢
@@JO-jk2df 是看起來像槓鈴的那個鏈接樁，一端鏈接脖子，另一端鏈接頭髮，連接樁鏈接脖子之後要向背後傾斜，這樣臉就會貼住脖子，會把脖子的一部分給遮住。
来啦
谢谢支持
Did everyone get that?
脖子是怎麼回事！？是設計不良？還是關節沒喬到正確定位？
是設計得比較難打理 只有在壹定角度下才能看不到脖子關節，把玩起來需要註意
🦒
脖子让人略微无法接受呢
一开始我也是 但是还是买了 哈哈
这是你第一个DC模型吗？
海洋堂我海有蝙蝠俠 小醜女和喪鐘 不過都是在我開始當up之前就買了 所以沒有做測評
另外还有什么想看的测评吗，如果有也可以告诉我，如果有机会的话我也会做一下的。
怎麼感覺脖子好長…
這款脖子設計得有點難打理。需要調整好角度才能看起來比較正常。
脖子拔出來 將脖子跟輪轉球調成90度脖子就正常了 拿到新品都要調一下 常規