Hello. I used a front wheel hub from the tractor. I don't know what size the bearings are anymore. I think the outer diameter was 110 mm and the inner diameter was 50 mm.
I did not make a project for this machine. I bought a pellet mold and started building a pellet machine. I had a front wheel hub from a tractor and a pulley from a grain harvester. Along the way I made all kinds of changes. The final project looks a little different. I used a reduction group and a 7.5 kw motor. My goal was to make straw pellets for the fire.
Awesome thanks for sharing your project with us l,m going to try to make this don,t hav any more tools then you do ya make it look easy so ya do great work with so little you should be proud of yourself in your mind ya did it so others can do it too thks for showing us it canbe done l need this cause have over 100 rabbits too feed cause store bought feed after covid Shot up highso need too make my own feed wish l could by your plans to make yours but this video gives a cha ce keep you posted on my progress you hav email too send pictures of my machine to you ? Later Paul
I made changes to this project. In this configuration, it only works with ground cereals. For sawdust, the rotation speed of the mold must be reduced to 100 rpm and a 7.5kw motor is required
I made pellets from sawdust with the same mold. My mold is made of grain, for which the conicity of the holes is deeper. From what I've seen on others, the taper of the sawdust dies is smaller. If the conicity is too large, then the pellets come out of the mold too quickly and do not bond very well.
To make pellets from sawdust, I ground the wood with a hammer mill. ruclips.net/video/O35F_2LT0rA/видео.html In this video I made pellets from sawdust with a grain mold. ruclips.net/video/9JAHKn90d1w/видео.html
Ты прав. Строительство машины для производства пеллет обходится не совсем дешево. У нас было много материалов, извлеченных из сельскохозяйственной техники. Мне понравилось работать над этим проектом, и я удовлетворен тем, что машина для гранулирования работает.
Salut. Am facut doar cateva probe cu aceasta presa pentru peleti. Pana acuma totul este ok. Mai trebuie sa imi fac un tocator de paie si dupa aceea o sa incep sa fac mai multi peleti.
@@GheorgheBogdanEugen poate ca ai dat gaura prea mare prin axul cu rulmenti. Daca nu rezista atunci o sa fac un ax mai gros cu alt model de rulmenti. Am vazut role facute cu rulmenti conici.
@@betoespin2805 DE ACUERDO. Para construir la peletizadora compré un molde de pellet de 260 mm de diámetro y 8 mm de agujeros. Utilicé un cubo con rodamientos de la rueda delantera de un tractor. Usé una polea de una cosechadora de granos. El motor tiene 4 kw a 3000 rpm. En esta configuración, funciona bien para fabricar pellets de comida para animales. Para hacer pellets de fuego, modifiqué la máquina de pellets. Reduje la velocidad de rotación del molde con la ayuda de un grupo reductor y poleas y utilicé un motor de 7,5 kw y 1500 rpm. Quiero hacer unas pruebas con un molde con agujeros de 6 mm. Para más detalles tengo vídeos con la evolución del proyecto.
@@rzm64oop I don't think plans are needed to build a pellet mill. It depends on the parts available. I had a wheel hub from a tractor and a perforated mold. I built the pellet machine based on these parts.
GORILLA TOTEM ITALIA. Sono interessato Ad una macchina più grande Per prova. Poi se vuoi? ti ordino altre macchine. Dammi un tuo contatto che ti chiamo. Grazie.
How to build a pellet machine part 2 - ruclips.net/video/fOML92ny9QY/видео.html
Such a nice share my friend
Thanks
Frumos proiect, felicitări de realizare
Multumesc Berzo.
Bună dimineața și spor la lucru!
Buna dimineata. Multumesc.
What type of bearing you chossen for ?
Thank you very well, explained. Very well built.
👍
Un like si de la mine,asteptam partea a doua!
Urmeaza si partea a doua.
Tankz sir,,diy,,pilit machine
amazing!! What kind of roller bearing do you use?
Hello. I used a front wheel hub from the tractor. I don't know what size the bearings are anymore. I think the outer diameter was 110 mm and the inner diameter was 50 mm.
Nice video 👍🏻
Thanks
Can you send the project of this machine? I am from Brazil
I did not make a project for this machine. I bought a pellet mold and started building a pellet machine. I had a front wheel hub from a tractor and a pulley from a grain harvester. Along the way I made all kinds of changes. The final project looks a little different. I used a reduction group and a 7.5 kw motor. My goal was to make straw pellets for the fire.
Beautiful work with limited tools 🔧 👏
Thank you!
Muy bien logrado, la base agujereada como la fábrico?
Very very thanks ❤❤❤❤❤
Good job.Very good.
Thanks
Creative video, thanks :)
Top parabéns 👏 talento aí ,vc vende é qual valor ?
Obrigado. Não está à venda. Eu construí esta máquina de pellets para mim.
great machine
Maravilha de projeto. Ganhou mais um inscrito.
Is taper hub important for pallet machine below die?
it is a tractor wheel hub and has tapered bearings. Under the mold I used a conical bearing and in the lower part I used a normal bearing.
Awesome thanks for sharing your project with us l,m going to try to make this don,t hav any more tools then you do ya make it look easy so ya do great work with so little you should be proud of yourself in your mind ya did it so others can do it too thks for showing us it canbe done l need this cause have over 100 rabbits too feed cause store bought feed after covid Shot up highso need too make my own feed wish l could by your plans to make yours but this video gives a cha ce keep you posted on my progress you hav email too send pictures of my machine to you ? Later Paul
Când urmează partea 2 ?
Cred ca duminica sau luni o sa postez continuarea.
Can you share dimensions of machine??
Congratulations...!!
thank you
Можете прислать проект со всеми размерами?
К сожалению, я не сделал эскиза с размерами этой пеллетной машины.
Is wood pellet great for this type of mill.
I made changes to this project. In this configuration, it only works with ground cereals. For sawdust, the rotation speed of the mold must be reduced to 100 rpm and a 7.5kw motor is required
and for sawdust can the same matrix be used? and only slowing down to 100 rpm, with a 7.5 kw motor?
I made pellets from sawdust with the same mold. My mold is made of grain, for which the conicity of the holes is deeper. From what I've seen on others, the taper of the sawdust dies is smaller. If the conicity is too large, then the pellets come out of the mold too quickly and do not bond very well.
To make pellets from sawdust, I ground the wood with a hammer mill.
ruclips.net/video/O35F_2LT0rA/видео.html
In this video I made pellets from sawdust with a grain mold.
ruclips.net/video/9JAHKn90d1w/видео.html
Oh please just let me whip out my metal lathe it’s in the back of the garage somewhere I know I left it in there years ago 😂
Nice job well done.
Tkanks!
ขอบคุณที่ให้ความรู้ครับ
Nu kos kieu yeuhh mang pakiiiiinnn😁😁😁
faina treaba , eu miam cumparat-o pe a mea de la LopiMet cu 50 da miliuane
Am considerat ca merge destul de repede cu flexul si nu am avut chef sa mai montez plasma. Plasma o folosesc doar la taieturi ma dificile.
Muito boa ideia muito bom mesmo
Butucul de pe ce provine?
Utb 650 roată față
Magkano lol ng oorder ako?
Мастер👍
Металл очень дорогой!
Это не каждому под силу. 😞
Ты прав. Строительство машины для производства пеллет обходится не совсем дешево. У нас было много материалов, извлеченных из сельскохозяйственной техники. Мне понравилось работать над этим проектом, и я удовлетворен тем, что машина для гранулирования работает.
Maaf alamat jogjanya mana ya?
Cum stai cu rulmenți de la role, au rezistat, câte tone ai făcut?
Salut. Am facut doar cateva probe cu aceasta presa pentru peleti. Pana acuma totul este ok. Mai trebuie sa imi fac un tocator de paie si dupa aceea o sa incep sa fac mai multi peleti.
@@DorelBorlea am schimbat o grămadă de rulmenți se înfierbântă dispare vaselina și crapă mă gândesc să schimb tipul de rulmenți
Daca nu vor tine rulmentii atunci o sa gauresc axul si o sa pun gresoare, astfel incat sa gresez rulmentii odata la cateva ore de functionare.
@@DorelBorlea și pe asta am făcut-o și sa rupt axul
@@GheorgheBogdanEugen poate ca ai dat gaura prea mare prin axul cu rulmenti. Daca nu rezista atunci o sa fac un ax mai gros cu alt model de rulmenti. Am vazut role facute cu rulmenti conici.
Tooooop
Mag kano po ang binta nyo sa pilit machine
How much Po?
where are you located? how can we order a machine from you?
I do not produce pellet machine. Is not for sale. This is a homemade project.
onde posso comprar essa maquina de fser pelettes
Din Romania
Va salut, cat ar costa o astfel de presă ? Mulțumesc!
Salut. Nu fac pentru vanzare.
Good item
La matrice et les rouleaux sont-ils durcis ?
Le moule est traité thermiquement. Les galets sont constitués d'une tige de vérin hydraulique. La tige du vérin hydraulique est traitée thermiquement.
What is capacity of machine?
I think 200 kg / h
@@DorelBorlea thanks sir
What is shaft diameter??
40 mm
Diferential case Mr on part
magkano po pasimbol ng machine
Pwede po makahinge ng Format magkano po Salamat po sa Dios
Comment on peut trouver cet appareil
Ceci est un projet de bricolage et n'est pas à vendre.
thats not DIY, thats fully assembled machine pellet😅✌️
😁😅I consider it a DIY pellet machine since I built it. ;)
Kaya nga e hahah
Where I can get die??
You have to look at stores that sell presses for making pellets.
Muy bueno video amigo 👍 me gustaría contactarte para tener más detalles!!
Saludos y gracias desde Argentina 🇦🇷🇦🇷🇦🇷
Hola. Podemos chatear a través de mensajes aquí en RUclips.
@@DorelBorlea me gustaría tener datos técnicos acerca de la construcción de la maquina! Saludos y gracias 👍
@@betoespin2805 Bien. En que estas interesado.
@@DorelBorlea estoy interesado en la maquina peletizadora! Gracias 👍
@@betoespin2805 DE ACUERDO. Para construir la peletizadora compré un molde de pellet de 260 mm de diámetro y 8 mm de agujeros. Utilicé un cubo con rodamientos de la rueda delantera de un tractor. Usé una polea de una cosechadora de granos. El motor tiene 4 kw a 3000 rpm. En esta configuración, funciona bien para fabricar pellets de comida para animales. Para hacer pellets de fuego, modifiqué la máquina de pellets. Reduje la velocidad de rotación del molde con la ayuda de un grupo reductor y poleas y utilicé un motor de 7,5 kw y 1500 rpm. Quiero hacer unas pruebas con un molde con agujeros de 6 mm. Para más detalles tengo vídeos con la evolución del proyecto.
dostum güzel bir proje lakin toplar geniş mile orta merkezdende bir baskı gerekli
takdir için teşekkürler. Ne demek istediğini anlamadım maalesef.
Âmi faceți și mie una?
Nu fac pentru vanzare. Am construit-o pentru mine.
Mag Kano boss
Me puede fabricar una
Es un proyecto casero. No hago para la venta.
Молодец мастер!!!
На моем канале изготовление дробилки разных конструкций, экструдеры, пресс для брикетов, веялка зерновых чертежи бесплатно..
Заходите найдете полезную информацию....
Mujhe ek dai chahiye
Local
Mm
Ùū
meseriașu e meseriaș
Salutare. Multumesc de apreciere. Imi dau silinta sa iasa treaba buna.
@@DorelBorlea hi could you give me a sketch plan with dimensions thanks.
@@rzm64oop I don't think plans are needed to build a pellet mill. It depends on the parts available. I had a wheel hub from a tractor and a perforated mold. I built the pellet machine based on these parts.
ну все теперь точно сделаю....когда токарный станок куплю
Токарный станок очень пригодится в хозяйстве. Если вы купите один, вы сможете делать все виды проектов.
Su número por favor
GORILLA TOTEM
ITALIA.
Sono interessato
Ad una macchina più grande
Per prova.
Poi se vuoi? ti ordino altre macchine.
Dammi un tuo contatto che ti chiamo.
Grazie.
Ciao. Questo è un progetto fai da te. Non costruisco macchine a pellet in vendita.
@@DorelBorlea Ok
Grazie per la risposta.