Question. The Pump Oil Power setting. Does this actually change anything? I have the 5KW heater with the 0.022ml pump supplied. If I set the pump power to 16 will it reduce the amount of fuel being pumped. Or is this setting supposed to be set to match the pump you are using to tell the system what is connected?
Thank you for choosing LIKACI! You can adjust the amount of fuel pumped by the fuel pump each time on the switch of our diesel heater (16 μ L and 32 μ L) However, the frequency of the fuel pump will not be adjusted. This mode does not require matching with the fuel pump you are using.
I have hcalory diesel heater with Bluetooth I have an issue with the internal clock, after setting the time as per your instructions, the clock gains 10mins in a 12 hour period ????
I have this heater, And no matter what settings I put it on. If I turn it off I come back to my van and it’s running again, I don’t have any settings on no auto temp no nothing but it just fires up on its own. Why does it do this? It’s annoying and using my diesel
Hello! I already have a vevor diesel heater but it looks like the same as yours! Do you think I can I adapt your screen display on my heater? I have to find a solution because mine is really cheap compared to yours! ^^ THank you!
Thank you for choosing LIKACI! The main board and controller of the diesel heater need to be compatible with each other. We will ensure that our main board and control are compatible. If you need to install our controller on other heaters, we cannot guarantee whether it will be compatible.
Hi, I replaced the original control of my vevor 2KW with this one and everything works perfectly well, including the altitude display and the function to stop and start the heating completely automatically.
After only 1 tank of diesel my heater started smoking bad and now smokes black when running. My other diesel heater has always worked flawlessly. Not sure what happened to this one.
@@TheGreendabomb have to pull the chamber apart to clean it and retry before winter. The first couple runs it worked fine. I never shut power down to it and always let it shut itself down no changes to fuel delivery were made. If I wanted a good mosquito fogger i could fire it up now 🤣.
Thank you for choosing LIKACI! Our diesel heater is not equipped with a plateau module, so it is not possible to adjust the altitude on the controller.
Disconnect from battery, wait 30 sec. Re connect. Long press the fuel button until prime starts. Might take 5-8 sec. Once you feel it's primed push the off button. Then turn back on. Best of luck.
I have the same controller. The prime button doesn't work after you connected the power supply, ie like pressing the prime button after pressing the on/off button on the lower right. Like SurreyUs says, need to press the prime button during the 12v power supply connection (cold boot startup process), then power off button, then power up (warm boot startup). It's not explained well in the manual. When my heater was started from new, I couldn't figure how to prime, but it started after a few minutes as the pump keeps ticking and eventually fuel gets to the heater.
I just bought the heater with this controller, it worked for a week and the heater will not turn on. Battery voltage is good- 25 volts. Is there any way you can assist?
Thank you for choosing LIKACI! Our diesel heater is suitable for both 12V and 24V voltages. We believe the issue you're experiencing may be due to the voltage exceeding the compatibility of our product. We recommend adjusting the output voltage of the device powering the diesel heater and then checking if the problem is resolved. If you have any other questions, please don't hesitate to reach out to us anytime. Have a great day!
What does the oil pump power adjustment does on 16? Or up to 32 ul ?
16 is the lowest fuel feed level
I was looking at these and the competitors brand to choose one to do a review on. This controller is different from the competitors.
I keep getting E02 on this controller on my Likaci 8k unit. Would I adjust the oil pump setting higher to get more fuel?
How to adjust the altitude setting in the top left corner with the mountain? Mine is 0.0km
You can't. There is no altitude mode on this model.
Question. The Pump Oil Power setting. Does this actually change anything? I have the 5KW heater with the 0.022ml pump supplied. If I set the pump power to 16 will it reduce the amount of fuel being pumped. Or is this setting supposed to be set to match the pump you are using to tell the system what is connected?
Thank you for choosing LIKACI!
You can adjust the amount of fuel pumped by the fuel pump each time on the switch of our diesel heater (16 μ L and 32 μ L)
However, the frequency of the fuel pump will not be adjusted. This mode does not require matching with the fuel pump you are using.
@@Likaci-Heater Thank you :)
I have hcalory diesel heater with Bluetooth i just bought i simple turn on amd turn off do u i have to do all this function? Like its important?
I have hcalory diesel heater with Bluetooth I have an issue with the internal clock, after setting the time as per your instructions, the clock gains 10mins in a 12 hour period ????
same for me
Mam ten sam problem, zna ktoś rozwiązanie ?
I upgraded just can't get it sarted
How to I change from Celsius to Fahrenheit? I have the same controller showed in the video.
Thank you for choosing LIKACI!
Our diesel heater controller can only display Celsius degrees and cannot be adjusted to Fahrenheit degrees temporarily.
I have this heater,
And no matter what settings I put it on. If I turn it off I come back to my van and it’s running again, I don’t have any settings on no auto temp no nothing but it just fires up on its own.
Why does it do this? It’s annoying and using my diesel
Hello! I already have a vevor diesel heater but it looks like the same as yours!
Do you think I can I adapt your screen display on my heater?
I have to find a solution because mine is really cheap compared to yours! ^^
THank you!
Thank you for choosing LIKACI!
The main board and controller of the diesel heater need to be compatible with each other. We will ensure that our main board and control are compatible. If you need to install our controller on other heaters, we cannot guarantee whether it will be compatible.
Hi,
I replaced the original control of my vevor 2KW with this one and everything works perfectly well, including the altitude display and the function to stop and start the heating completely automatically.
@@-Ckyoso- Thank you very much!!! ;)
@@-Ckyoso- where did you buy the controler ? did you need matching motherboard?
@@-Ckyoso-how did you set to stop and start automatically? Thanks
After only 1 tank of diesel my heater started smoking bad and now smokes black when running. My other diesel heater has always worked flawlessly. Not sure what happened to this one.
Too much fuel, did you solve the error?
@@TheGreendabomb have to pull the chamber apart to clean it and retry before winter. The first couple runs it worked fine. I never shut power down to it and always let it shut itself down no changes to fuel delivery were made. If I wanted a good mosquito fogger i could fire it up now 🤣.
How to change altitude mode?
Thank you for choosing LIKACI!
Our diesel heater is not equipped with a plateau module, so it is not possible to adjust the altitude on the controller.
Does someone know how to enter the secret menu in this unit?
Pushing the prime button doesn't do anything on my unit. Is there something I need to do to get the prime button to work?
Disconnect from battery, wait 30 sec. Re connect. Long press the fuel button until prime starts. Might take 5-8 sec. Once you feel it's primed push the off button. Then turn back on.
Best of luck.
@@SurreyUs Will try it this way next time I need to prime.
I have the same controller. The prime button doesn't work after you connected the power supply, ie like pressing the prime button after pressing the on/off button on the lower right. Like SurreyUs says, need to press the prime button during the 12v power supply connection (cold boot startup process), then power off button, then power up (warm boot startup). It's not explained well in the manual. When my heater was started from new, I couldn't figure how to prime, but it started after a few minutes as the pump keeps ticking and eventually fuel gets to the heater.
@@Peter-un8no So on mine the above solution worked. Hold button down, plug in display. Hold until pumping starts. Takes a while, maybe 15 seconds.
Hi has it got auto off function I know some have via f9 menu
Thank you for choosing LIKACI!
You can check out our latest video, it may solve your problem!
Link: ruclips.net/video/ijKdEwLT7S8/видео.html
I just bought the heater with this controller, it worked for a week and the heater will not turn on. Battery voltage is good- 25 volts. Is there any way you can assist?
Thank you for choosing LIKACI!
Our diesel heater is suitable for both 12V and 24V voltages. We believe the issue you're experiencing may be due to the voltage exceeding the compatibility of our product. We recommend adjusting the output voltage of the device powering the diesel heater and then checking if the problem is resolved.
If you have any other questions, please don't hesitate to reach out to us anytime. Have a great day!
@@Likaci-Heater I would love to test one of your heaters in New England during this cold winter for my RUclips channel!
Buy the heater then ya tight git, sounds like you just want something for nothing.
@@boyracer1988 I’ve purchased two of these already
Stop with the horrlbe A I comentary, unwatchable