IPC Router IP Camera WiFi Repeater | How To Set Up Connect To NVR Extend Range Boost Wireless Signal
HTML-код
- Опубликовано: 12 окт 2019
- In this video we will show you how to set up, add, connect, configure and match a dedicated WiFi repeater or an IPC Router to your ONVIF NVR in order to extend the range, improve, boost and increase the strength of the wireless signal for your IP Smart Camera & CCTV system. This unit allows you to connect the system using the Air Bridge technology and also designed to make wired camera wireless. You can use the built-in repeater in WiFi Camera but dedicated IPC router provides better stable connection and avoid "Too Much Connection" error.
There are also other methods to solve "out-of-range", IPC disconnect or poor signal which we have discuss in our previous videos. Click on the following playlist to watch them:
• How To Open PTZ Dome W...
With the advanced of technology, WiFi or wireless security cameras have become increasingly popular over wired systems. The downside to a wired system are complexity of installation, flexibility and portability.
We bought this 8-Ch DVR kit from Hiseeu Store on Amazon.com. Here's the link to buy: amzn.to/2EPeOzs.
Wired IP Cams, such as PoE (power over Ethernet) and hard-wired analog cameras, need wires for video transmission and power supply. They typically use Cat e5/6/7 Ethernet cables to communicate with home network router or ONVIF NVR (Network Video Recorder). Traditional systems need 2 cables, one for power and coaxial connecting to the DVR (Digital) for data.
Alternative to wired and wireless is a wire-free system. Wire-free IP cameras are the most flexible, easy to install, can be mounted almost anywhere making them the ideal choice for apartment renters or homeowners. Battery technology such as in Blink XT2, the best in indoor/outdoor 2-way IP Cam, could last up to 2 years. Blink XT systems also works with FireTV and Amazon-Alexa for hi-tech home automation.
The major downside to the wireless IP Cam systems is interference with competing signals and overlapping broadcasts from devices on the same bandwidth , making them less reliable. Wireless signal strength, or scope of coverage, is tied to factors such as router, amount of interference presence, the distance and the barriers. Buildings, structures, trees, walls, floor or metal barriers between the camera and wireless router could magnify connection issues.
However, there are several ways or methods in which you can boost, increase or extend the weak or poor WiFi signals and improve the transmissions of your IP smart camera -- bullet, PTZ (Pan-Tilt-Zoom), dome, box, miniature or spy IP cameras -- to the NVRs. If you IP Cams keep dropping off from the network, the first thing to do is to test you home WiFi signals.
There also also many products and devices on the market you could buy in order to increase the range, extend the distance and achieve maximum coverage of your CCTV system. They can be purchased from Amazon, AliExpress, BangGood.com and more.
1) Antenna Range Extender: These spiral wired simple directional antennas usually come with RP-SMA Female to Male connectors along with cables but you can always purchase additional cable with different length but be mindful that signal lost will occur over longer cable. Some also have magnetic base.
2) High Gain Antenna: Some of these omni-directional antennas are Dual Band WiFi 2.4GHz 5GHz 5.8GHz with high dBi gain from 3 to 10 decibels. But keep in mind most WiFi cameras operates on a 2.4GHz frequency. These are perfect for Wireless Network Router, Access Point, USB Adapter and PCI Adapter rather than for IP Camera WiFi Range Extender.
3) Dedicated Wi-Fi Repeaters: A wireless repeater is a range-extending device that works with your existing router to forward the signal farther. Place the repeater within range of your router and point it in the direction of the wireless camera. These dedicated Wi-Fi repeaters are essentially IPC router designed to be easily matched with your NVR and WiFi cameras for a simple plug-and-play.
4) Using IP Cam Built-In Repeater: You can use software manager on your NVR to program the cameras to create a daisy-chain to extend the signal of the weaker camera via the closer one to the NVR. This method hasn't work for us because it resulted in "too much connection" error code.
Other ways to do it: Adjust the antenna, relocate the router or NVR, use old router to create a bridge and many other methods we will cover in future videos.
We have an Hiseeu system featuring 8-Channel ONVIF NVR 1080p 1TB HDD IR66 Day/Night Infrared capabilities but there are other popular brands such as Armcrest, Hikvision, OOSSXX, NightOwl, Swan, CamView, HeimVision, SafeVant, SMONET, Blink XT2, ZOSI, ANNKE, LOREX, Reolink, ONWOTE, GW PoE, EZVIZ, Anlapus, Arlo Pro, Wyze, Canary, Ring Spotlight, Reolink, Google Nest and more.
[This is Episode 17]
Recording Date: October 6, 2019
Video URL: • IPC Router IP Camera W... 
Хобби
Thnk u so much brother...... I didn't aware of this repeater thing..... Before seeing ur video I thought to install extended antenna..... After I seen ur video I thought to buy repeater that time I just searching the option on my NVR for connect repeater ... That time only I noticed one camera is not connected on NVR ....that camera was connected with another camera......which means we can use as repeater which camera is closer to NVR .... So now I connected accordingly .......thank u so much for ur information brother
Thank you, I installed the IPC wifi repeater using this blog!
For those of you still interested in having 4 cameras connected to the repeater. Delete all cameras (Max 4) that you want to connect to the repeater from the NVR. Press the reset button on all including the repeater. Go to match code on the nvr. The DHCP will automatically kick in on the repeater whilst scanning. The channels will be allocated using 192.168.1.xxx IPs as opposed to 172.20.14.xxx IPs. After this if you check in the repeater settings you will see all 4 connected. These NVR's are hard work I know 🤷🏻♂️
Thank you so much , life saver !
On my instructions it only shows how to add them individually connecting each cam to the NVR by cable, but the two cams I have connection issues with are not easy accessible , with your help I connected them both to the extender, unfortunately even then one kept having issues, so as you said each cam is a repeater in itself I used another cam nearer than the router and nvr as it’s own extender and now it’s all running perfectly and will be getting some extra cameras without having to worry about range.
Same....bro I am also found now only...each cctv camera can work as repeater .......
You’re the man!!!!! Helped me.
Thanks for your help with this information
Thank you .......you were very helpful
mantap la man
Thank u very much bro
Video is rad. He explains the install process really well.
Great video. Iv'e tried changing antennas to boost the signal but it wasn't a great success. this may be the answer to my ipc problems. I do have 1 question.....can i connect a repeater to another repeater to extend the range even more?
Thanks, i have some cameras not showing record video on ip pro but does show on base unit. Any ideas?
Im confused. Why can't you add the red ones to a repeater? Is nt the whole point to connect the ones with a bad connection?
Nice video perfect all works
But you maybe know also posibile to use 2 ipc router on the system?
Hi Aiman! Do you know where I can find help on the repeater? When I plug it in with the ethernet cable, the NVR does not recognize it. It doesn't show up on the "Video Manage" screen, and I tried pressing the reset button for different time lengths, I got a voice to say "Matching codes" a couple of times, I pressed match code on the screen and nothing; other times I got "Reset to factory settings" and got nothing different afterward. Any link or idea to test will be very appreciated, thanks!
I have a same problem
Thank you so much for sharing all of this information. I did try going into the repeater menu before purchasing a repeater and discovered that I could use existing cameras to help as a repeater. I realize it may pull down the signal strength from the closer one. I was able to improve my furthest camera signal strength from 18 to 33 by doing this.
Update, after about 20 minutes, both signals went down. Looks like I'm buying a repeater.
Thanks for your videos. I purchased the Hiseeu system with 8 cameras, when I turn it on my display shows "HD DVR" not "NVR" like yours. also the menu is slightly different. I'm trying to set up the Repeater mode but I don't have the (Refresh) option on my screen. Do I need some kind of software up-date or do you think they sent me an out dated system ? Thanks for your help :)
Did you get it fixed?
Question,
4 Camera already connected to NVR wireless. But I want connect wifi router to the 1 camera. Is there any setup change to do it?
Did you try using that repeater wired so it can accommodate 4 wireless camera?
Since this isn't made for outdoor use is there a way to use a outdoor wifi repeater to do the same thing ?
NICE SMILE
This is the same software as my techage . anyway I bought a wifi extender but I cant get the NVR to recognize it do you know what could be the problem? The ethernet cable lights blink on the NVR but not on the extender side shouldnt it also be blinking?
I have 4 of these on my system, one of them has 3 cameras connected. They can each support 4 cameras. A cheaper way to do the power supply is to use a splitter and tap it from the camera power supply.
Hi and thanks, please how to setup connection between Wifi camera and no wifi NVR
Very informative. With a Hiseeu wireless system, do you know if I can use a regular wifi extender/repeater (by regular I mean the ones they have to boost range of my home wifi router) or does it have to be Hiseeu? Can I connect 2 or 3 of the extenders at the same time?
Nah
I would like to add a different camera like the Bunker Hill security how can I put this camera on this system it should be incompatible since it is a wireless camera
Do you know how to set up the repeater that you can have another camera repeating off another camera that is run off the repeater. example camera 1 and camera 2 are getting signals off a repeater. i want to use camera 1 as a repeater to go further to give camera 3 a signal
It's too bad that we can't replace the stock antenna's on the nvr itself as well. Or can you?
Hi my name is Temidayo am a Nigerian. You got lovely n helpful videos n I hope to see more of same.
I need ur guide with my wireless cctv setup. I bought a wireless 8 channel Nvr using 8 wireless ip cams with no physical LAN ports to plug in any cable, is got just power port for 12v dc. The set-up was pretty direct until when 2 cameras were out of d wireless Nvr Wi-Fi signal range. Plus the Nvr doesn't ve a repeater feature under video settings.
To resolve this I want 2 use my Tp-link TL-MR3240 router as d Nvr's reporter but this is were I've gotten stuck n do need ur help with.
The routers ip addy is 192.168.0.1,
Nvr basic ip: 192.168.0.90
Gway: 192.168.0.1
Pri. Dns: 192.168.0.1
Nvr ntwrk ip: 172.20.19.3
Gway: 172.20.19.1
All ip cams ip are: 172.20.19.xxx
So how do I connect the router so as to extend the Nvr to the 2 ip cams presently out of range n also boost signal to any around it too.
thank you very much. that was a great help. i noticed my smonet software is the exact as yours. so, i wonder who the first company that developed this system before the patent was stolen. lol
Did you ever make that video about how to convert a wired camera to a wireless one?
I need help with my menu system if you can
How do you connect the cameras that have poor signals to the repeater if you can only connect cameras with signals seen by the NVR? I have two cameras that have intermittent connections, but they are too far away to maintain enough of a connection to be recognized by the NVR.
is there a way to change the internal IP address on the NVR they start with 172.20 but i wanna change it to 192.168
I liked your explanation, but I would like to know how to update this Nvr, I couldn't update my nvr
Can you connect all 8 cameras and a repeater or is it 7 cameras and a repeater?
Hi I was wondering if you can give me advice on my revo wireless unit I live in upstate ny .but I am on vacation in my homeland p.r. I have wifi internet from my brother house but I cant get connection to my home
Thank you signed jesus camacho
Is there any way to view my footage on a non smart TV?. I assumed I could watch my surveillance using a firestick and Alexa….no luck
Can this be done with a CPE in repeater mode?
EyeOnAiman what I’ve done is to extend mine is buy an sma cable and just screw the antenna in to the end of the cable
Dear I Have some issues with the repiter do you know how to resolve, my problem is every 10 minutes the camera that I connect to the repeter cut the video or lost the connection
Will work with imou NVR?
Sir is the ipc universal? Works with imou nvr?
Where did you buy the ipc router
thanks for the info. But you are focusing more on ur face than the camera manager.
only one way u can connect 4 cameras to the repeater first 2 cameras u connect to separately to each camera and after the camera what u using for repeater that u connect to the actual repeater
buena informacion, utilice otra marca de repetidor wifi, y en el telefono se ven las camaras, pero en el NVR muestra "error de contraseña", sabes cual es la contraseña?
could u help please when i connect ipc and get to the bit it says wireless has not been connected mine comes up update failed and when u refresh it just keeps coming update failed, please help driving me mad. When it does connect then i select the camera and save it does wipes off. many thanks
Can I use any router repeater like tenda 4in1 router/wisp/repeater/ap
Pls email me tnx
Hi still waiting for you you to tell use how to add another cam to the icsee app do you know??? How to do it or not
Make a video for the sound
Can’t seem to get my system to record when motion is detected.
I have issues with my ipc router, there is error update fail, setup fail. Can you suggest me to resolve this issue, how to update device firmware
can you extend the camara with no wifi
But the red ones are the ones that I need to repeat to
Can i install more than 1 ipc?
Yes
Links if you are interested to purchase Hiseeu Security Cameras & DVR Systems from Amazon.com:
1. amzn.to/2EPeOzs ([Expandable 8CH] Hiseeu Wireless Security Camera System with 1TB Hard Drive with One-Way Audio, 8 Channel NVR 4Pcs 1080P 2.0MP Night Vision WiFi IP Security Surveillance Cameras Home Outdoor)
2. amzn.to/34TjUpk (【5MP 8Channel】Hiseeu Security Camera System,H.265+ 8CH DVR + 4Pcs AHD Cameras,Global Phone&PC Remote,Human Detect Alarm,98Ft Night Vision,IP66 Waterproof,24/7 Recording,Easy Setup,Plug & Play,1TB HDD)
3. amzn.to/3lwBqWm (1080P HD Outdoor Wireless Security Camera Pan Tilt Zoom (5X Digital) Compatible Hiseeu Wireless Security Camera System PTZ Camera Two-Way Audio Waterproof Dome Motion Detection Night Vision)
4. amzn.to/3lA07RI (Hiseeu 2MP 1080P Outdoor Wireless Security Camera,Waterproof Outdoor Indoor 3.6mm Lens IP Cut Day&Night Vision with Power Adapter Compatible with Hiseeu 8ch Camera System)
5. amzn.to/3jvN0zw (【8Channel,Audio】 Hiseeu Wireless Security Camera System,1TB Hard Drive,4Pcs 1080P Cameras 8Channel NVR,Mobile&PC Remote,Outdoor IP66 Waterproof,Night Vision,Motion Alert,Plug&Play,7/24/Motion Record)
6. amzn.to/2DhWEWY (Hiseeu 1080P Security Camera, Outdoor Two-Way Audio Surveillance Cameras Bullet IP Camera Waterproof,Motion Detection Day& Night Vision with Power Adapter Compatible with Hiseeu Wireless Camera System)
7. amzn.to/3lzimqL (【3TB HDD Pre-Install 】 Hiseeu Wireless Security Camera System 8 CH NVR 4Pcs HD 1080P Indoor/Outdoor WiFi Surveillance Camera Wireless IR Bullet Camera Waterproof, Motion Alert, Remote Access)
8. amzn.to/32DqIot (Hiseeu 5MP PoE Security Camera System with 3TB Hard Drive,8 Channel 5MP DVR Security System with 4pcs Dome PoE IP Camera for Home Security,Night Vision,IP66 Waterproof,1-Way Audio,Onvif Support)
9. amzn.to/34O2aMm (Hiseeu 5MP PoE Security Camera System with 3TB Hard Drive,8 Channel 5MP DVR Security System with 4pcs Dome PoE IP Camera for Home Security,Night Vision,IP66 Waterproof,1-Way Audio,Onvif Support)
Please note that we do not work for Hiseeu. Any technical questions, support or warranty should be directed directly to Hiseeu.
I have to camera working but not other two
Hi, I’m deaf . I want cctv WiFi extender but I not clever . Can u help me ? Can send picture me ? Please help me. My router far can’t , near box dvr near WiFi extender use can?
Have you ever tried connecting POE cam to wifi NVR?
good video, thanks. My setup is in a large warehouse using the same system you have in the video (8 wireless cameras), we were getting low signals to most cameras and after installing 2 extenders we are still having issues. Can a wireless camera be connected to CAT5/6 Ethernet cable and run as a wired camera? Typically the network port on the camera is used for configuring. My thought is to have a network switch that the NVR connects to, to provide its network access, then connect a cable from that switch to the camera. Will the NVR "see" the camera and use the wired connection?
My other question is, we have an existing wireless network in the building that provides much better coverage than the NVR, can the NVR and cameras use that wireless network instead of using the NVR signal?
I think WiFi Camera system will not work with wired facility using Cat5/Cat6 &.switch etc as you mentioned especially because the supplied NVR is not designed for that sort of configuration. You will have to employ signal boosting devices and the best and cheap will be if used the Antenna with wire.
Every time the power goes it shows Connection failure. How to fix that problem?
My unit cuts off every few seconds then comes back on, then repeats
I am completely convinced that I have never been more confused at any time in my life.
Was he speaking Swahili?
Please do no mock Swahili. It's a beautiful language and even made it to the Lion King. Ever heard of "akuna matata"?
@@EyeOnAiman so you reply to this comment but you won't answer anyone's questions?
Ok I thought this might be a helpful video but I was more confused after just watching 1/2 of the video. I think your smart enough to do the job but you need to edit your video better. After clicking on several items you had a bunch of failures or ppp up messages that you couldnt explain and never tell someone to buy a cheaper product when the one you got wasnt worth the money you paid for it. Also say to buy a knoen good brand and do research on it to find out how good a product it is. This should of been a 3 min video but you lost me after the first 2. Re-edit this and skip all the issues and go as if everything worked the first time. Then at the end you can explain what to do if an issue or failure pops up. But on the right track so dont give up!
You tend to talk too fast and say unnecessary lines. Just saying You should edit out. Thanks for this video tho. Waiting for my device to be delivered
How hackers could use smart home devices to spy on you (Marketplace)
2,469,979 views•Sep 28, 2018
Completely useless video. You never discussed the range increase that was achieved. You never tested the distance. You don't explain whether that thing can be outdoor or indoor. You also don't talk about whether it needs its own wifi account with a provider.