Here are the #ᴬᴰlinks to newer systems similar to what we purchased in 2019 as shown in this video: 1. amzn.to/45AJjjK | 【Expandable 8CH,2K】 Hiseeu 3MP WiFi Security Camera System Outdoor/Indoor, 4pcs Pan 180°View Cameras, 2-Way Audio, WiFi 8CH 5MP NVR System, Night Vision, Home WiFi Surveillance Cameras, 1TB Hard Drive 2. amzn.to/45m2oGS | [Person Vehicle Detection] Hiseeu 4K PoE Security Camera System, 8 Ports 16CH PoE NVR with 4Pcs 5MP IP Security Camera for Outdoor, Waterproof, Smart Detection/Playback, 1TB HDD, Home Surveillance Kits 3. amzn.to/3E72BSr | SOVMIKU Wireless Security Camera System【2K Human Detection】PTZ Pan/Tilt 3MP Outdoor Camera, 360° View, Auto Tracking, 2 Way Audio, Color Night Vision, Siren Alarm 8Ch Expandable, Alexa, 24/7 Record, 2.4G WiFi 4. amzn.to/3PaRApa | REOLINK 12MP Security Camera System Commercial, 8pcs H.265 12MP PoE Security Cameras Wired Outdoor, Person Vehicle Pet Detection, Spotlight Color Night Vision, 16CH NVR 4TB HDD, RLK16-1200B8-A 5. amzn.to/3qBiX2x | (5.5MP & PIR Detection), Dual Antennas Security Camera System 3K 5.0MP 1944P Wireless Surveillance Monitor NVR Kits with 4TB Hard Drive, 2-Way Audio, 8Pcs Outdoor WiFi Or Click on Amazon link here and search for what you need: amzn.to/3xIOsqg
I have been looking for this information for about 6 months now. I want to change/update my NVR but keep the cameras I have. The one issue I WAS going to have was adding the original cameras to the new NVR. You've solved that problem now! And all explained in a way that novices like me can understand. Well done and many many thanks.
Except this camera system sucks. Good luck to the kid unless it’s him or his family member that created it because 3 screens, 12 cameras and 4 HD’s later none of them work
Hello, awesome video (yes I know its 4 years old, but....). Is it possible to link 2 base units (where the harddrive is installed) into one system? I have a base unit from an older setup which I upgraded, but now I want to add a base unit to see if I can extend the wifi range to a couple of cameras needed in backyard. Hope this makes sense. Thank you!
Thanks heaps for this, I have a different brand of NVR and the instruction manual really doesn't cover how to do what is a core function that every owner should know. Your video solved a huge problem that I had.
Hi! I need help and you're the only one I found knowledgeble enough 😊 if you already installed the cameras around a building persay, does that mean I have to take then down and connect them with the ethernet cable to the dvr? Kindly thank your for your help
Unfortunately that is the easiest way to resolve any connection issues. You can try pressing the reset button or cold start on/off unplug first. Sometimes unplugging wire works. Shouldn't take more than a few minutes to uscrew and take down.
big thanks to you .........i watched this video and from having 3 cameras just go down for no reason they now all work again from watching this video for some unknown reason they were no longer being picked up via wifi and now they do .....my system is a floureon 4 cameras and the self contained hd screen and hardrive system.
Great video thanks for the overview, and the heads up on the direct from China brand. Fantastic to see you are into so many topics. Keep up the great work in learning as it's incredibly helpful to your studies and career later to have a wide knowledge base to draw from.
How do I re add all of my 8 wireless cameras to my nvr without using ethernet cable or placing them next to the nvr box as all 8 of my cameras are installed 15 feet up on my house roof so taking them all down is not an option ? Thanks
So I have a question. When I installed mine all 4 cameras went to 5,6 7,8. How can I change them to 1,2,3,4??? ANd I just ordered a second system for another house and I only hot 1 out of 4 cameras to pair. None of the other will. How can I pair them??? When I installed my first system they all paired automatic. This time it didnt
Thank you so much. I have added 2 extra and some how I didn't do this and the dvr found them. I went to add another No such luck. I'm trying this tomorrow
I mate. Thanks for the video. I just got my cctv camera (VICTURE PC750 wireless security camera). Please advice, will this work with ONVIF WiFi NVR. Thanks
I have an onvif IP wifi cameras Nvr kit, which uses this same system as this tutorial. So, I bought another camera with onvif protocol, as I do the replacement in this Nvr system.
Hi my friend,wondered if you can help me,as i have a Hiseeu nvr which is set up on my home TV but im wanting to also watch it on my chromebook os,can you help me with it please.Many thanks,Paul.
Is there any way to change some of the cameras wifi to a different Wi-Fi? Or do they all have to be on the same one? I have the same system with 8 cameras but two of the cameras won’t pick up the signal that’s connected to the box
I have Fyuui 8 camera NVR system just like yours almost. I have 4 cameras that came with it. I am trying to add a 5th Fyuui 350 degree camera to this system and it wont let me. I went thru the steps just like you did and no camera shows up?? It is almost the same as you have except where you hit refresh,,mine says search. all the rest is the same. I have it direct wired in just like you. Any ideas?
Hi... I have at the same sistem NVR, but actually have an error in the registry and I can't see the old video. Now I can see only a live video... do you have an idea for the problem? Thank you
Could you give advice on how to add an ONVIF IP camera to any ONVIF enabled XVR ? Struggling to find software that actually will change an IP address to avoid Ip conflict in the XVR.
Hello friend, I have a failure in a system similar to that and the thing is that I have the cameras with network cables, they are configured well but if the power goes out suddenly some of them no longer appear. If you have a method, please.
I saw an answer on Amazon that said you can connect Zosi cameras along with other brand-name cameras to the hiseeu system. Is this possible? And if so how do you do it?
I just bought a Hiseeu all-in-one unit and I could really use this young man to show me what in the hell to do...I'm lost! Ok, I have all the cables but after I plug my HDMI cable into the monitor what do I plug the OTHER end into? The camera's work great. I tested them and they plug right into the monitor but how do I get the HD to work? Do I have to plug it into my computer router? I'm really lost..and I'm old LOL
@JASON VOORHEES Hey Jason, that's very nice of you. Thanks so much. Yes, they are up and running. I actually just got the last one positioned yesterday. I have to get a longer ethernet cable but it all looks great. Thanks again brother!
@JASON VOORHEES Cool..you'll love them. I just was up on the ladder doing a little repositioning. I think I got everything covered. Good luck Jason..the high-definition in these cameras are awesome...they've come a long way.
@JASON VOORHEES There's a lot of "little things" that go into getting these cameras ready as I found out. I used conduit where ever I had exposed wired. The wire-plug that goes to the camera is about 8 ft long. One end, that goes into the camera kinda looks like the end you'd plug into a speaker and the other is a 1x3" block-plug that goes into the outlet. I had to do a LOT of "ground work" to get them up and running. I also had to install an outdoor outlet just to plug one of the damn things in LOL. Let me know how it all works out.
@JASON VOORHEES I think once you get it set up outside it 'll look better. Mine is an "all-in-one" set up. It comes with a monitor which is HD. The main push about these cameras are 24 internet recording so once you get it set up with your router and onto your phone it should look better! I paid close to $400 for this set-up. It came with 4 waterproof cameras and a nice monitor. Keep in touch!
Hi, 3 of my 4 cameras have been blocked wirelessly, testing them with the utp cable if they work. I have a K-820 NVR, and plug and play cameras. What should I do?
Did u figure this out ? Because all of a sudden one of cameras won’t show even when I add it back . It only shows when plugged in directly not wirelessly. WiFi add only shows 3 and never finds the 4th….
Hey there, I've got anran cameras. I can see the picture in the preview boxes. But on the main screen, it says encode not support. And there is no picture. Do you know what the problem is? I've messaged the company, and they can't even tell me what the problem is. It seems like the person I was talking to couldn't even tell me what encode not support means. Im trying to connect it to the dvr
I would like to know if you can help me how to update this system, as there are some cameras that report that being in conflict with the channel and the system is the same as that of your explanation.
Can you do a video explain or showing your record plan ..... because after 15 days I cant see the records anymore, i check the disk and it was full ..... then I change the disk and now i steel cant see the new records
I've purchased a business with the Smonet all in one NVR/TV with 8 cameras and the previous owner does not remember their user id or password. Can someone help with how I can delete old settings and start anew?? I can view while at business, but want the capabilities to view via phone when away.
I needed u for something else! I’m lost! Clueless lol my security camera isn’t finding APN, says no Internet connection and I have internet! Just changed new WiFi password n now it’s not working
Hi nice Channel. I got a Problem with my NVR. Evelyn week, je looses it‘s internal Wifi Settings. After 2 times cut off AC the Settings are back. Couleur you please help me? Greetings from Germany. Bye Daniel.
Hi I’m having a problem I have ZOSI system I’m able to backup but when I try playing the video on my Mac it says file not supported the file says AVI then when I tried with windows it said file encoded ? How can I play it ?
So thats the easy way if you have that UI. How can I set up my ONVIF camera to an NVR with a different UI that does not have matching? I have ANNKE DW81KD & a Wanview W6 camera. I have no IP address for the camera so cannot install it. Many thanks.
If you do not have a refresh button, like mine does not, then hit the "match code" button and your camera should tell you it is in the wireless setup or something to that effect. When the camera is finished connecting, it will tell you, connection complete or something to that effect. You should then see your new camera displayed on the monitor.
Not sure if this is what you mean, but you can adjust which box the cameras appear in by right clicking on the normal screen (with all the cameras) and clicking "Adjust Channel" and dragging the cameras to the box you want them to appear to! Cheers!
Hello. I am looking for a way to connect all my WiFi home security cameras( all are different brands unfortunately) from one app. Is that possible? Any help would be greatly appreciated.
My cameras are 1) Wansview 1) HapSee 1) CloudEdge 1) genni The reason I have a variety of different brand of cameras is due to price and availability. I found from auctions, flea markets etc. any help? please? thanks
My PTZ Hiseeu camera stopped monitoring/ tracking people or movements. I’ve tried resetting them no luck . I can manually rotate them . They use to follow a humanoid’s movement.
excellent presentation. I'm ignorant so I don't know your content yet. As a native speaker your diction is perfect. The annotations are really not essential but this is techy stuff and often, one needs to stop the play and read the annotation. 90 per cent of the competition have bad accents [not a crime-but poor business model] and the are too lazy to put up annotations. A big downer.
I have one TZ-HB0312 camera and I want to connect it to my home network router. I did not find how to connect this camera with PC (Win 7) I want to watch the camera image on a networked computers.Can you help me?
I added a fith camera to my Hissuee NVR and now a get the "Poor Signal" Error adn no video is shown, even so the camera lies next to the NVR!! Any ideas?
Buddy, please help me, I got everything connected in the right way, the motion detection is working, however when I get a notification to my phone for a motion detection, I can’t play the 10 seconds videos on my phone !! Why is that ?? When I try to play it keep saying loading and nothing comes up. Please I need your help
Hi great video as I have been looking for ages, the problem I am having and I am not very technical. I have managed to do everything you did in your video like adding the channel, the only difference is plugging the camera directly into the NVR doesnt pick the camera up when I refresh it will only pick up the camera if I put it in my router and it works that way, my only problem is when I disconnect the LAN cable its freezes and says ICP disconnect. Can you tell me how to fix this problem I have a feeling my router isn't finding the camera wireless and only with the LAN cable. I am pulling my hair out now and lost what to do now. Regards stef
It is possible that the camera in ONVIF only therefore will only work with the cable. For example, our PTZ camera cannot be connected to our NVR using WiFi, it only connects using cable to the router because it is ONVIF.
I had a plug and play set, it perfectly ran on the wifi, when one day single camera dissapeared. When I plug in the cable and do the steps you showed here it appears on the screen, but when I unplug LAN cable it dissapears. What else might be as the reason for this problem? P.S. Working cameras have factory set IP: 172.20.14.30-32, meanwhile over LAN connected camera gets the router IP 10.0.0.28, NVR also has IP 10.0.0.xx maybe the problem is with IP addreses??
Hi, I successfully added 6 IP wireless camera but the 7th and 8th are not working after I disconnect it from ethernet it appears can't get a wifi signal
Here are the #ᴬᴰlinks to newer systems similar to what we purchased in 2019 as shown in this video:
1. amzn.to/45AJjjK | 【Expandable 8CH,2K】 Hiseeu 3MP WiFi Security Camera System Outdoor/Indoor, 4pcs Pan 180°View Cameras, 2-Way Audio, WiFi 8CH 5MP NVR System, Night Vision, Home WiFi Surveillance Cameras, 1TB Hard Drive
2. amzn.to/45m2oGS | [Person Vehicle Detection] Hiseeu 4K PoE Security Camera System, 8 Ports 16CH PoE NVR with 4Pcs 5MP IP Security Camera for Outdoor, Waterproof, Smart Detection/Playback, 1TB HDD, Home Surveillance Kits
3. amzn.to/3E72BSr | SOVMIKU Wireless Security Camera System【2K Human Detection】PTZ Pan/Tilt 3MP Outdoor Camera, 360° View, Auto Tracking, 2 Way Audio, Color Night Vision, Siren Alarm 8Ch Expandable, Alexa, 24/7 Record, 2.4G WiFi
4. amzn.to/3PaRApa | REOLINK 12MP Security Camera System Commercial, 8pcs H.265 12MP PoE Security Cameras Wired Outdoor, Person Vehicle Pet Detection, Spotlight Color Night Vision, 16CH NVR 4TB HDD, RLK16-1200B8-A
5. amzn.to/3qBiX2x | (5.5MP & PIR Detection), Dual Antennas Security Camera System 3K 5.0MP 1944P Wireless Surveillance Monitor NVR Kits with 4TB Hard Drive, 2-Way Audio, 8Pcs Outdoor WiFi
Or Click on Amazon link here and search for what you need: amzn.to/3xIOsqg
I have been looking for this information for about 6 months now. I want to change/update my NVR but keep the cameras I have. The one issue I WAS going to have was adding the original cameras to the new NVR. You've solved that problem now! And all explained in a way that novices like me can understand. Well done and many many thanks.
This kid is definitely going to go places in life. Great job on the video. ALWAYS keep learning.
Except this camera system sucks. Good luck to the kid unless it’s him or his family member that created it because 3 screens, 12 cameras and 4 HD’s later none of them work
@@TreyM1609 Hi are you serious about these cameras i was going to buy from Amazon. Please let me no if you have time Thanks.
@@ganeshnarayan5505 absolutely. I received 3 separate sets and none were able to record and 1 box didn’t even come with everything.
@@TreyM1609 THANKS.
Hi Aiman, absolutely brilliant, I was stuck on this for an hour till I found your video. Many grateful thx from the United Kingdon
THANK YOU THANK YOU ITS HAS BEEN DRIVING ME MAD
i now have 8 cameras 👍👍👍👍😁 GREAT VIDEO
Hello, awesome video (yes I know its 4 years old, but....). Is it possible to link 2 base units (where the harddrive is installed) into one system? I have a base unit from an older setup which I upgraded, but now I want to add a base unit to see if I can extend the wifi range to a couple of cameras needed in backyard. Hope this makes sense. Thank you!
Thanks heaps for this, I have a different brand of NVR and the instruction manual really doesn't cover how to do what is a core function that every owner should know. Your video solved a huge problem that I had.
Wayto go little man I'm getting good advice from someone probably a fifth my age good on you
Hi! I need help and you're the only one I found knowledgeble enough 😊 if you already installed the cameras around a building persay, does that mean I have to take then down and connect them with the ethernet cable to the dvr? Kindly thank your for your help
Unfortunately that is the easiest way to resolve any connection issues. You can try pressing the reset button or cold start on/off unplug first. Sometimes unplugging wire works. Shouldn't take more than a few minutes to uscrew and take down.
@@EyeOnAiman Thank you 🙏
big thanks to you .........i watched this video and from having 3 cameras just go down for no reason they now all work again from watching this video for some unknown reason they were no longer being picked up via wifi and now they do .....my system is a floureon 4 cameras and the self contained hd screen and hardrive system.
Your voice seems clear. May I know what mic you're using? And where it's placed?
Very cute kid offering very good advise. Need video on how to connect to home wifi when following the instruction manual doesn't work for it!!!
Thank you for an extremely helpful tutoring session
Happy to help!
Great video thanks for the overview, and the heads up on the direct from China brand. Fantastic to see you are into so many topics. Keep up the great work in learning as it's incredibly helpful to your studies and career later to have a wide knowledge base to draw from.
Awesome I tired to add the camera through the app on my phone but it kept failing this worked well for me.
Been trying for days thank you so much for all your help
Buenas tardes, puedo emparejar camaraa denotras marcar al NVR HISEEU?
Mediante el protocolo ONVIF?
Thank you so much for the information! Very informative and definitely helped with adding a new camera! Very helpful!!!!
How do I re add all of my 8 wireless cameras to my nvr without using ethernet cable or placing them next to the nvr box as all 8 of my cameras are installed 15 feet up on my house roof so taking them all down is not an option ? Thanks
Very informative, now I'm going to attempt to hook up my camera.
So I have a question. When I installed mine all 4 cameras went to 5,6 7,8. How can I change them to 1,2,3,4??? ANd I just ordered a second system for another house and I only hot 1 out of 4 cameras to pair. None of the other will. How can I pair them??? When I installed my first system they all paired automatic. This time it didnt
Thank you so much.
I have added 2 extra and some how I didn't do this and the dvr found them.
I went to add another
No such luck.
I'm trying this tomorrow
Thank you very much, I have been looking for this information for so long!
I mate. Thanks for the video. I just got my cctv camera (VICTURE PC750 wireless security camera). Please advice, will this work with ONVIF WiFi NVR. Thanks
Did you make a video to updating the firmware of your system?
great informative video. thanks
I have an onvif IP wifi cameras Nvr kit, which uses this same system as this tutorial. So, I bought another camera with onvif protocol, as I do the replacement in this Nvr system.
Hi my friend,wondered if you can help me,as i have a Hiseeu nvr which is set up on my home TV but im wanting to also watch it on my chromebook os,can you help me with it please.Many thanks,Paul.
thank you very much!. such a simple explanation is a great help!.👍
thank you so much for making it so easy to follow and understand.
I follow you from Sénégal ...You do a nice job I appreciate you
Thanks you are awesome and fixed my problem....thanks for making the video
Do you know if it's possible to hook up hiseeu cameras to a different brand of NVR?
Great video! I do have a set of cameras without the ethernet port visible - I'm trying to figure out how to sync those as well - any ideas?
Did you figure this out?
Is there any way to change some of the cameras wifi to a different Wi-Fi? Or do they all have to be on the same one? I have the same system with 8 cameras but two of the cameras won’t pick up the signal that’s connected to the box
Do you think we can add a wifi camera from another brand like HeinmVision to the Hiseeu NVR?
I have 4 channel NVR, i am planning to hook up it with 7 cameras with POE splitter. Will the NVR support 7 cameras? Thanks!
Hi can we add tapo cam in hiseeu nvr ?
Good teaching video also have question can u add a ptz to the nvr ur using thanks 😃
I have Fyuui 8 camera NVR system just like yours almost. I have 4 cameras that came with it. I am trying to add a 5th Fyuui 350 degree camera to this system and it wont let me.
I went thru the steps just like you did and no camera shows up?? It is almost the same as you have except where you hit refresh,,mine says search. all the rest is the same.
I have it direct wired in just like you. Any ideas?
Hi... I have at the same sistem NVR, but actually have an error in the registry and I can't see the old video. Now I can see only a live video... do you have an idea for the problem?
Thank you
Could you give advice on how to add an ONVIF IP camera to any ONVIF enabled XVR ?
Struggling to find software that actually will change an IP address to avoid Ip conflict in the XVR.
hello, good video on the use of this material,
can you tell me how to reverse the image when placing the camera on the ceiling thank you
Hello friend, I have a failure in a system similar to that and the thing is that I have the cameras with network cables, they are configured well but if the power goes out suddenly some of them no longer appear. If you have a method, please.
Very knowledgeable thanks for the video
I saw an answer on Amazon that said you can connect Zosi cameras along with other brand-name cameras to the hiseeu system. Is this possible? And if so how do you do it?
I just bought a Hiseeu all-in-one unit and I could really use this young man to show me what in the hell to do...I'm lost! Ok, I have all the cables but after I plug my HDMI cable into the monitor what do I plug the OTHER end into? The camera's work great. I tested them and they plug right into the monitor but how do I get the HD to work? Do I have to plug it into my computer router? I'm really lost..and I'm old LOL
@JASON VOORHEES Hey Jason, that's very nice of you. Thanks so much. Yes, they are up and running. I actually just got the last one positioned yesterday. I have to get a longer ethernet cable but it all looks great. Thanks again brother!
@JASON VOORHEES Cool..you'll love them. I just was up on the ladder doing a little repositioning. I think I got everything covered. Good luck Jason..the high-definition in these cameras are awesome...they've come a long way.
@JASON VOORHEES There's a lot of "little things" that go into getting these cameras ready as I found out. I used conduit where ever I had exposed wired. The wire-plug that goes to the camera is about 8 ft long. One end, that goes into the camera kinda looks like the end you'd plug into a speaker and the other is a 1x3" block-plug that goes into the outlet. I had to do a LOT of "ground work" to get them up and running. I also had to install an outdoor outlet just to plug one of the damn things in LOL. Let me know how it all works out.
@JASON VOORHEES I think once you get it set up outside it 'll look better. Mine is an "all-in-one" set up. It comes with a monitor which is HD. The main push about these cameras are 24 internet recording so once you get it set up with your router and onto your phone it should look better! I paid close to $400 for this set-up. It came with 4 waterproof cameras and a nice monitor. Keep in touch!
@JASON VOORHEES Also Jason, I didn't like mine when I was just testing it inside either. It'll look much clearer when you get it all set up.
I would like to know if you can help me, how do I update this system, as my system is identical to this one fo your tutorial.
i have the same NVR but I don't have the cameras yo have . i do have other IP cam without the rj45 cable jack on it. how do I connect type of cams?
Hi, 3 of my 4 cameras have been blocked wirelessly, testing them with the utp cable if they work. I have a K-820 NVR, and plug and play cameras. What should I do?
Did u figure this out ? Because all of a sudden one of cameras won’t show even when I add it back . It only shows when plugged in directly not wirelessly. WiFi add only shows 3 and never finds the 4th….
do you need to have internet to make this system work?
Thank you, it is great to know! 👍👍👍
Very helpful
Helpful.
Thanks for sharing.
You're welcome! Thanks for watching!
Thank you.
I have a 3 yr old lorex lnk7108 poe 8ch system costco trying to swap out 2 cams now non lorex am I wasting my time and just need to buy lorex poe
Hi. Do you know how far the camera works?
Hi.....can that nvr IP Pro connect with camera ptz outdoor
How do I change channel numbers? I need to make cam 1 show where cam 2 is located . Any help will be greatly appreciated, and thanks
Hi there can you help me as when I have added the new camera it comes up with resolution to big !!help!!!
Thank you so much for this video!!
You are so welcome! Thanks for watching!
Do you know how to change the time to am/pm
Hey there, I've got anran cameras. I can see the picture in the preview boxes. But on the main screen, it says encode not support. And there is no picture. Do you know what the problem is? I've messaged the company, and they can't even tell me what the problem is. It seems like the person I was talking to couldn't even tell me what encode not support means. Im trying to connect it to the dvr
Thank you!
great job!
Thanks! Cheers!
I would like to know if you can help me how to update this system, as there are some cameras that report that being in conflict with the channel and the system is the same as that of your explanation.
Can you do a video explain or showing your record plan ..... because after 15 days I cant see the records anymore, i check the disk and it was full ..... then I change the disk and now i steel cant see the new records
Hi do you know how we can to invers the picture?
I've purchased a business with the Smonet all in one NVR/TV with 8 cameras and the previous owner does not remember their user id or password. Can someone help with how I can delete old settings and start anew?? I can view while at business, but want the capabilities to view via phone when away.
I am trying to add this camera to a Bechol NVR it is saying the encode not supported. What do I have to do to add this camera
how do you add another make of camera to your NVR ???
Many thanks for the help! You've just saved me a ton of work. ⭐⭐⭐⭐⭐
I'm glad to hear it helped! Thanks for watching!
I needed u for something else! I’m lost! Clueless lol my security camera isn’t finding APN, says no Internet connection and I have internet! Just changed new WiFi password n now it’s not working
Hi nice Channel. I got a Problem with my NVR. Evelyn week, je looses it‘s internal Wifi Settings. After 2 times cut off AC the Settings are back. Couleur you please help me? Greetings from Germany. Bye Daniel.
Please help how do I get my images to show on Nvr
Thanks mate, lost my manual. Love your work!
is there a way to change the internal IP address on the NVR they start with 172.20 but i wanna change it to 192.168
Hi I’m having a problem I have ZOSI system I’m able to backup but when I try playing the video on my Mac it says file not supported the file says AVI then when I tried with windows it said file encoded ? How can I play it ?
Try viewing using the VLC media player! I hope that helps!
How do I get that blue wire to get it upstairs to put the camera out of my window
So thats the easy way if you have that UI. How can I set up my ONVIF camera to an NVR with a different UI that does not have matching? I have ANNKE DW81KD & a Wanview W6 camera. I have no IP address for the camera so cannot install it. Many thanks.
If you do not have a refresh button, like mine does not, then hit the "match code" button and your camera should tell you it is in the wireless setup or something to that effect. When the camera is finished connecting, it will tell you, connection complete or something to that effect. You should then see your new camera displayed on the monitor.
Nice
Where’s your video to how to switch channels around? Thanks
Not sure if this is what you mean, but you can adjust which box the cameras appear in by right clicking on the normal screen (with all the cameras) and clicking "Adjust Channel" and dragging the cameras to the box you want them to appear to! Cheers!
hey mate. how do I reset this system ? mine is behaving strange all of a sudden. thanks
Thanks
Hello. I am looking for a way to connect all my WiFi home security cameras( all are different brands unfortunately) from one app. Is that possible? Any help would be greatly appreciated.
My cameras are
1) Wansview
1) HapSee
1) CloudEdge
1) genni
The reason I have a variety of different brand of cameras is due to price and availability. I found from auctions, flea markets etc. any help? please? thanks
My PTZ Hiseeu camera stopped monitoring/ tracking people or movements.
I’ve tried resetting them no luck . I can manually rotate them . They use to follow a humanoid’s movement.
excellent presentation. I'm ignorant so I don't know your content yet. As a native speaker your diction is perfect. The annotations are really not essential but this is techy stuff and often, one needs to stop the play and read the annotation. 90 per cent of the competition have bad accents [not a crime-but poor business model] and the are too lazy to put up annotations. A big downer.
Please do a video on connecting an extra camera that does Not have ethernet port on camera. Trying to add to the original four cameras
How to change order of cameras on Monitor ???
I have one TZ-HB0312 camera and I want to connect it to my home network router.
I did not find how to connect this camera with PC (Win 7)
I want to watch the camera image on a networked computers.Can you help me?
I added a fith camera to my Hissuee NVR and now a get the "Poor Signal" Error adn no video is shown, even so the camera lies next to the NVR!! Any ideas?
Buddy, please help me, I got everything connected in the right way, the motion detection is working, however when I get a notification to my phone for a motion detection, I can’t play the 10 seconds videos on my phone !! Why is that ?? When I try to play it keep saying loading and nothing comes up.
Please I need your help
If the wifi connection is down the onvif will also not work? Pls advise
Can i connect this camera to mobilephon via router with out nvr
Can i add a diferent brand camera to my nvr sistem? One of my cameras broke and i cant find the same brand
hi my cameras are turn on my wireless internet connection is successful but i have no video on monitor how do i fix it
Nice
Hi great video as I have been looking for ages, the problem I am having and I am not very technical. I have managed to do everything you did in your video like adding the channel, the only difference is plugging the camera directly into the NVR doesnt pick the camera up when I refresh it will only pick up the camera if I put it in my router and it works that way, my only problem is when I disconnect the LAN cable its freezes and says ICP disconnect. Can you tell me how to fix this problem I have a feeling my router isn't finding the camera wireless and only with the LAN cable. I am pulling my hair out now and lost what to do now. Regards stef
It is possible that the camera in ONVIF only therefore will only work with the cable. For example, our PTZ camera cannot be connected to our NVR using WiFi, it only connects using cable to the router because it is ONVIF.
I had a plug and play set, it perfectly ran on the wifi, when one day single camera dissapeared. When I plug in the cable and do the steps you showed here it appears on the screen, but when I unplug LAN cable it dissapears. What else might be as the reason for this problem? P.S. Working cameras have factory set IP: 172.20.14.30-32, meanwhile over LAN connected camera gets the router IP 10.0.0.28, NVR also has IP 10.0.0.xx maybe the problem is with IP addreses??
Hi, I successfully added 6 IP wireless camera but the 7th and 8th are not working after I disconnect it from ethernet it appears can't get a wifi signal