@@FPVUniversity what KV do you recommend for 7" 7037 gengan on 6s? Also 7.5" 7535 6s and 8"genfan 6s wondering what you think for KV on all these prop sizes. I like cinematic stuff but like to freestyle also. Not super crazy spaze flying where you can't see what's in front of toh at any point. Lol. Feel like 2810 1180kv might be the better option for the 7" and 7.5" props, tho I'll be running the 7.5" mostly. Not sure if j should go 2812 1115kv for 8" or if the 2810 1180kv would be good good enough? Like having a few of the same builds I can run the same motors on even if using different props. The 2810 1180kv I'm unsure if it will freestyle good with that? Thanks for your time.
Thanks for the amazing frame, Pawel. Could you share diff setup or PID and filtering settings screenshot according to your FC and motors - it will be great for building PRIX7
kilka rzeczy jakos mnie nie przekonuje do tej konstrukcji przez co mam wrażenie, że będzie mało wytrzymała: 1. pojedynczy battery strap (nie zaufałbym), 2. sposób montowania anten - dyndające się, wystające na cieniutkich maszcikach - raz, że powoduje to dodatkowe wibracje, a dwa po pierwszym krecie do naprawy (o ile w ogóle przeżyje), 3. ramiona które są przewiercone przez środek przyśrubowane do bottom/top plate'a - przy takim rozwiązaniu ramię zawsze pęka w miejscu śruby.
Cześć Paweł, mam baterię lipo 6s 6500mAh 830g czy 7" poradzi sobie z takim ciężarem czy lepiej założyć mniejszy pakiet / iść w 10" większe silniki, śmigła etc.? Pozdrawiam
Cześć Paweł, mam pakiety lipo 6s 6500mAh o masie 830g. Czy 7" poradzi sobie z takim ciężarem czy lepiej założyć mniejszą baterię / iść w większą ramę, silniki, śmigła etc.? Pozdrawiam
In theory, bi-blades are more efficient than tri-blades. In practice not always that much of a difference. I run bi-blades on everything over 7 inches. Bi-blades sound way cooler, if that matters. The tune for each quad will also be different depending on the type of props you mount.
Pawel gday from Australia 🇦🇺. Mate im about to start my old style aos 7 inch frame and been given the advise to go with TMotor F100/1000 kv . Please 🙏 can you give me your thoughts 🙏? JB was saying go for 1500 or 1700kv and can always lower the output limit ? Im new to all this and desperate for some advise before I go ahead
Hey I never thought about this before. Your on to something . The government is making us think this round earth 🌎 crap when it's been concave all along .😮 how else does the ocean not just pour out? It has to be concave or else all the oceans would fall off the end of the earth . Der!
Cześć Paweł, mam pakiety lipo 6s 6500mAh o masie 830g. Czy 7" poradzi sobie z takim ciężarem czy lepiej założyć mniejszą baterię / iść w większą ramę, silniki, śmigła etc.? Pozdrawiam
Thanks for the video. Any unstabilized footage of longer portion of flight?
My Pirx HD.7 frame arrived today - looking forward to this build!
I hope you will like it!
Is there an adjustable screw-type GoPro mount available for it? @@FPVUniversity
I already replied via email :) Armattan production forwarded your message
@@FPVUniversity what KV do you recommend for 7" 7037 gengan on 6s? Also 7.5" 7535 6s and 8"genfan 6s wondering what you think for KV on all these prop sizes. I like cinematic stuff but like to freestyle also. Not super crazy spaze flying where you can't see what's in front of toh at any point. Lol. Feel like 2810 1180kv might be the better option for the 7" and 7.5" props, tho I'll be running the 7.5" mostly. Not sure if j should go 2812 1115kv for 8" or if the 2810 1180kv would be good good enough? Like having a few of the same builds I can run the same motors on even if using different props. The 2810 1180kv I'm unsure if it will freestyle good with that? Thanks for your time.
@@idiotsnifff 1200-1400KV will be perfect
thanks, This inspired me my next design
Thanks for sharing! Cool frame! ...Fyi, your links for the GPS and motors are not working.
Nice timing. Looking to build a 7" and this looks like the ticket. What are the battery's you are using on this one ??
Thanks for the amazing frame, Pawel. Could you share diff setup or PID and filtering settings screenshot according to your FC and motors - it will be great for building PRIX7
kindly reminder
kilka rzeczy jakos mnie nie przekonuje do tej konstrukcji przez co mam wrażenie, że będzie mało wytrzymała: 1. pojedynczy battery strap (nie zaufałbym), 2. sposób montowania anten - dyndające się, wystające na cieniutkich maszcikach - raz, że powoduje to dodatkowe wibracje, a dwa po pierwszym krecie do naprawy (o ile w ogóle przeżyje), 3. ramiona które są przewiercone przez środek przyśrubowane do bottom/top plate'a - przy takim rozwiązaniu ramię zawsze pęka w miejscu śruby.
Fantastic design, Pawel! Well done! 😃
And well... I do have a SpeedyBee F7 v3 stack laying around... 🤔
Anyway, stay safe there with your family! 🖖😊
Cześć Paweł, mam baterię lipo 6s 6500mAh 830g czy 7" poradzi sobie z takim ciężarem czy lepiej założyć mniejszy pakiet / iść w 10" większe silniki, śmigła etc.? Pozdrawiam
Cześć Paweł, mam pakiety lipo 6s 6500mAh o masie 830g. Czy 7" poradzi sobie z takim ciężarem czy lepiej założyć mniejszą baterię / iść w większą ramę, silniki, śmigła etc.? Pozdrawiam
What is the weight of the frame? Are the props out of view?
do you have the 3d files for the frame pieces or know where I can find them
Did you provide power to the O3 from vbat on the matek
Is there any pid tune & rates presets for this build?
Another question Pawel, I plan to fly this using 4S. What mAh capacity would be the sweet spot for LR?
would you recommend two blade propellers? I heard they are more efficient than three blade. What do you think?
In theory, bi-blades are more efficient than tri-blades. In practice not always that much of a difference. I run bi-blades on everything over 7 inches. Bi-blades sound way cooler, if that matters. The tune for each quad will also be different depending on the type of props you mount.
Pawel gday from Australia 🇦🇺. Mate im about to start my old style aos 7 inch frame and been given the advise to go with TMotor F100/1000 kv .
Please 🙏 can you give me your thoughts 🙏?
JB was saying go for 1500 or 1700kv and can always lower the output limit ?
Im new to all this and desperate for some advise before I go ahead
on how many S battery? 1500KV on 6S is overkill. 1700KV on 4S is perfect. In general, on 6S 1200KV is a bit tad ovepowered
@@FPVUniversity sorry 6s 1100kv
I want long range but would like to be able to have a bit of fun too . Tmotor F100 / 1100kv.
Thanks for the quick response 👍
what is the weight with camera and battery
750g
Pawel, does the FC have an on-board barometer?
Found out it does!
@fpvuniversity do you have stl files
What software do Betaflight or iNav use
I assume you recommend 6S power with the 1300kv version of the motors? Or is 4S and 1700kv still viable?
both are basically equal in terms of power
6S with 1300kv on 7inch props is absolutely overpowered. I use emax eco II 2807 1500kv on 4S, because 5S is overpowered, and 6S is shattering props.
Tmotor 1100kv?
Any dealer in europe?
The FAA doesn't have 7" and hate it.. you will lose but you can pretend!
🤣🤣🤣💯❤️❤️❤️
HQ's are far from the best 7 inch prop...
Then, what are your candidates for the title?
Greetings Paweł, have you become a flat earther yet?
I prefer the "The concave earth theory". After all, when you walk, which part of shoes wear of first?
@@FPVUniversitythat makes sense. Same with car tyre. Outer side got worn first. 😮
@@serang exactly! concave earth theory has a future!
Hey I never thought about this before. Your on to something . The government is making us think this round earth 🌎 crap when it's been concave all along .😮 how else does the ocean not just pour out? It has to be concave or else all the oceans would fall off the end of the earth . Der!
Cześć Paweł, mam pakiety lipo 6s 6500mAh o masie 830g. Czy 7" poradzi sobie z takim ciężarem czy lepiej założyć mniejszą baterię / iść w większą ramę, silniki, śmigła etc.? Pozdrawiam