An empty ball point pen is another good tool for adding relief texture between bricks/stones on card kits. The ball rolls so even with little finesse it's less likely to drag and tear the print surface 😉
If you think rows of slates is slow. I was building an old coaching inn which has a three hundred year old roof and the jiggledy slates that go with it. Each slate was individually cut and glued on. Some good hints here. Even when scratch building your own buildings some of these hints will work if using say textures like from Scale Model Scenery.
I did a similar thing many years ago, back in the 90’s. I copied the drawings of the country manor out of the Downesplans book, except I covered the walls in red brick rather than stone, the bricks were separately applied, and supplied by someone who sold them at model railway shows. I can’t remember the name of the person who made them.
I have been thinking exactly the same as you with the lack of texture on the otherwise excellent Metcalfe models. I scratch build but I am thinking that I could use the Metcalfe models as a kind of underbody for the more detailed work that takes them from good but flat models to believable miniature building. Thank you for this.
I've built a few Metcalfe kits for others (I model in a different scale) and I've carried out similar modifications, plus guttering, down pipes, roof/chimney flashing etc. They make into charming, realistic models doing so.
Really interesting tips and tricks 👍🏻 I like these kits too. I usually paint the corners and recess and use scales scenes printed roof tiles and other bits and bobs to enhance these wonderful reasonably priced kits 👍🏻
Thank you for the video These video are great therapy for me as I recover from my brain tumour and😢 stroke as I try to get back to my modelling my modelling
I was about to criticize your choice to overlay a perfectly good brick image with plasticard until I remembered I'd done just the same thing. Old Scale Structures Limited kits used printed "textures" which did, in their defense, have a slight texture to them but didn't offer nearly the same relief as actual scribed material. However in that particular example the base card of the structure is blank and you can add whichever texture you wish; those that came with the kit or your own. The plain printed sheets still have their use in the background where the lack of actual texture is less obvious but up front it makes sense to use a better texture. Cheers, thanks for the great tips!
Some brick papers can be run through a Sizzix Big shot embossing machine using Wills plastic brick sheets as an emboss. I’v also tried this method with art sketch pad paper, and other Wills sheet, although as yet I haven’t tried painting them yet. I think there is room to experiment much more with that process, though I haven’t had time yet.
Развлечения
An empty ball point pen is another good tool for adding relief texture between bricks/stones on card kits. The ball rolls so even with little finesse it's less likely to drag and tear the print surface 😉
Fantastic tips, the filler for the corners is superb. Thanks.
If you think rows of slates is slow. I was building an old coaching inn which has a three hundred year old roof and the jiggledy slates that go with it. Each slate was individually cut and glued on. Some good hints here. Even when scratch building your own buildings some of these hints will work if using say textures like from Scale Model Scenery.
I did a similar thing many years ago, back in the 90’s.
I copied the drawings of the country manor out of the Downesplans book, except I covered the walls in red brick rather than stone, the bricks were separately applied, and supplied by someone who sold them at model railway shows.
I can’t remember the name of the person who made them.
I’m so using all these tips from now on.
Great video. Beautifully produced.
Love this, thank you - especially liked the tip for filler, adding relief and plasticard - hadn't heard of that!
I have been thinking exactly the same as you with the lack of texture on the otherwise excellent Metcalfe models. I scratch build but I am thinking that I could use the Metcalfe models as a kind of underbody for the more detailed work that takes them from good but flat models to believable miniature building. Thank you for this.
Great tips. Thank you!
Just picked up on your video, I do the same with roofs, I also use stick on ready printed and weathered sheets
I've built a few Metcalfe kits for others (I model in a different scale) and I've carried out similar modifications, plus guttering, down pipes, roof/chimney flashing etc.
They make into charming, realistic models doing so.
Very informative Phil. Thank you.
Glad you enjoyed it
Really interesting tips and tricks 👍🏻 I like these kits too. I usually paint the corners and recess and use scales scenes printed roof tiles and other bits and bobs to enhance these wonderful reasonably priced kits 👍🏻
Thank you for the video
These video are great therapy for me as I recover from my brain tumour and😢 stroke as I try to get back to my modelling my modelling
Another thing I do is add strips of card around the insides of the door and window openings, so the window frames are set further back in the wall.
Thank you for another brilliant info
I think the Chimneys from Scenic3D add great detail as well
Brilliant thank you
Excellent suggestions! I think these could also be used in N gauge, and do give a bit of variety to Middletonville!
I was about to criticize your choice to overlay a perfectly good brick image with plasticard until I remembered I'd done just the same thing. Old Scale Structures Limited kits used printed "textures" which did, in their defense, have a slight texture to them but didn't offer nearly the same relief as actual scribed material. However in that particular example the base card of the structure is blank and you can add whichever texture you wish; those that came with the kit or your own. The plain printed sheets still have their use in the background where the lack of actual texture is less obvious but up front it makes sense to use a better texture.
Cheers, thanks for the great tips!
Some brick papers can be run through a Sizzix Big shot embossing machine using Wills plastic brick sheets as an emboss.
I’v also tried this method with art sketch pad paper, and other Wills sheet, although as yet I haven’t tried painting them yet.
I think there is room to experiment much more with that process, though I haven’t had time yet.
Thank you 🥳👍
Good tip thanks lee
Phil I could not hear the brand of roof tiles you used. Can you or someone state the name and from where they can be bought?
Thanks, Mark
I normal put down pipes and gutters Bill
Anybody know the name of the pointy tool with the ball on the end ??
In the US we call them embossing tools. They come in different sizes and usually sold as a set.