CNC Router upgrades from PreciseBits.com
HTML-код
- Опубликовано: 7 сен 2024
- I recently found out I could upgrade the Dewalt 611 I use on my Shapeoko CNC to make it a little easier to use. I purchased the CNC router upgrades from Precisionbits.com I hope this information is helpful to those of you using the 611 on your CNC. I was never a fan of the collet that came standard and when I found out there was a way to improve it with a Crown Collet from Precisebits.com I was on the internet placing an order. I am really happy with the upgraded Collet and Collet Nuts that I ordered. I was really pleased with the quality of the machining as well. Watch for my upcoming videos on the Workbee from Ooznest.com I plan on finishing that build over the next week or so and posting a video as well. Thanks for watching and your support. It means a lot.
Amazon Affiliate Links to Items in the video:
Router amzn.to/2QeO29h
My first Bit Kit amzn.to/2LvAoKq
Shop Vac amzn.to/2LvAoKq
How I get the most out of my ShopVac amzn.to/2LvAoKq
Not affiliate links, but I did receive the bits mentioned at no charge. This kit was 100% purchased by me to improve my CNC experience based on a friends experience and advice.
www.precisebit...
Best Dust Boot I've used. Game Changer www.suckitdust...
My CNC Shapeoko XXL shop.carbide3d...
#cncrouter #shapeoko #dewalt611
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
Very new to my X Carve and can't tell you how much help this was!
Awesome. Glad it helped.
Wow, I don't know why I have never thought about not having to constantly probe the z-height. I came for the review of the collet, but now all of a sudden I have bits on my shopping list. Also, check your Amazon links in your description. There are 3 copies of the Amana bit set.
Thank you ! Very cool just getting started with my xxl, I thrive on smarter not harder👍
Awesome. Congrats. Glad it was useful.
Pretty sweet setup there. I will gave to check them out. tha ke for sharing
Patrick's WorkShop thanks Patrick’s. How you doing? Keeping busy with the 3D printing?
Patrick's WorkShop you have the exact same Dewalt in your Shapeoko right?
Nice upgrade! I like that crown nut design!
DCD Laser & CNC it’s really nice being able to get in there and tighten and losses without having to rotate the bit with my other hand.
Collet Collars? Who knew??? I'm so tired of resetting Z every time. I'm definitely going this route! Thanx Chad!
Rick game changer for sure. Let me know what you think.
Recommend you don't tighten a collet/collett nut without a bit in it; it can distort and damage the collet.
I bought a three collet kit for my PC-7518, and it is really nice.
I didn't realize the bit collars are fixed in place.
Richard Farwell good tip. Thanks. I wouldn’t normally, but I wasn’t confident I would film the process without cutting myself. 🤣
@@ManCrafting Understand that -- having reached under the router (with the dust shoe ON so I can't see the bit) and scraped my knuckles -- Doh! At least the router's off. ;-)
I think we’ve all been there. Router bites from router bits. Dang they are sharp.
Thanks just ordered it for my S3
I've been meaning to order one more for my MiniMill, or maybe I did. I need to check my emails.
The collet collars is freaking awesome! Not having to re-set the z height would be great!
MakeTinkerShare you have no idea how much I like the idea of not having to mess with resetting.
@@ManCrafting oh I have an idea!!!
Very cool solution and well explained!
Thanks Eloy. Hopefully it helps someone.
Way cool. I need to look into that system for my Bosch.
They should have what you need. www.precisebits.com/gateways/ColletsNutsHome.htm
Compatible with:
Bosch families
1320, B1350, B1450 (all configurations)
1604A, 1606A, 1613, 1613EVS, 1613AEVS (all configurations)
1617, 1617EVS,1618, 1618EVS, 1619, 1619EVS, 1649 (all configurations)
MRC23EVSK, MRF23EVS, MRP23EVS (all configurations)
Hitachi family
M12VC, KM12VC (all configurations)
Nice improvement Chad. Im going to get a CNC one day and this info will come in handy. Thanks Bro. 👍👍
Thanks Mike. I can't wait to see what your creative mind comes up with when you finally get a CNC in your shop. I'm sure it will be amazing.
@@ManCrafting Thx Bro
@@TheMuzShop Have you made plans for WBC in 2020?
ManCraftingTM not yet but really thinking about going. February right?
@@TheMuzShop FEBRUARY 20-22, 2020 Tickets are selling fast.
Cool stuff Chad! 😃👍🏻👊🏻
Thanks Fred. I always appreciate your support. I hope we can get together soon.
@@ManCrafting 😃🤞🏻🤞🏻
Good tip, thanks for sharing!
Thanks, Doc! I hope all is well.
6-Points of Locking/UnLocking Points...
SWEET SETUP!
Do they make buts for Aluminum or Steel, as well as Wood & PVC?
What would you recommend for an Automatic/Directional Oiler? I'd like to have an Automated System with filtering...
I'd love to have a CNC Machine for Custom Small Engine Parts!🤔
Thank's for sharing!
Take care,
🤓 -Thomas
Western Washington State
Thanks for watching. There are definitely some guys that are doing amazing machining with the Shapeoko platform. I'd check out @vince.fab on Instagram for some idea of what all is possible. He's doing lots of custom engine parts. Also, Winston on the Carbide3D channel is doing a lot of aluminum machining. Precision Bits does carry bits for metal. I just took a look at their site and found this. www.precisebits.com/gateways/EndMillsHome.htm
Its funny I did these stoppers a week ago to my stock bits with drill stops very nice. How is the collet for sliping bits?
Todd Molloy I haven’t had any slippage. Extremely well made.
Do you just use the bigger 1/4 inch bits? Most of my bits are 1/8
Hey John, I didn't focus on it in the video, but the kit came with 1/8" and 1/4" collets. They also make the bits with the precision collars in the 1/8 size as well.