son buenas ideas,si llevan algun riesgo,pero aun con herramientas originales los hay,por no saber usarlas correctamente o darles usos que no se deben,por lo tanto al tener la precaucion debida estos proyectos pueden ser utiles
That last project of yours, adding a extra fin thus increasing surface area giving you more air torque thus more blowing power, resulting in negligible loss of battery power due to increased air resistance 🔧..
This is for Dr.Hacker. I don't know if you will read this comment or not. I hope you do. But I wanted to tell you thank you for posting these videos. I find it very relaxing and therapeutic to your stuff up on a playlist and just let your videos play while I am working on my stuff. It's nice to be able to watch someone NOT do the things that would trigger that very negative OCD side of me. I always find the need to make everything perfect and what could potentially be a really awesome project turns into a nightmare and a pile of shit because I get hung up on simple stuff and have to undo and re-do over and over until eventually I have ruined what I am working on and have to either start over on what I'm working on, or give up on the project and never finish anything. It's nice to see with your videos that I don't have to always strive for perfection all the time. To just keep going and that when things get finished, these tiny things don't even matter because the final results are so much better. You are a very good craftsman and you are very skilled and very good at what you do. I envy your ability to look beyond the "flaws" I fear this coming across very badly. But I also feel lile you know what I am talking about. So I guess I'll finish with saying this. Forget about all the negativity you will see from other people. Don't let that stuff drag you down. And I'm not going to say that other peoples opinions matter to you. Because there are those people out there that also think highly of what you are doing. On the same note don't let yourself drag ypu down with your own negativity in the same way. But I think sometimes our own opinions of ourselves will affect us more than other peoples.
I gotta get back to my projects now haha. Amother odd way of complimenting I guess haha, but. Your videos are nice because with ADHD I can play your videos and get back on task easier. The music choices in your videos aren't too distracting and kind of nice sometimes as background noise. Thank you for making these videos.
In the 3rd part of the video you have connected the motor with positive and connected the negative in switch mode. Is it right.? Sorry to say this please and rectify the same.
20:59 Well, it's easier/faster/economical to use a machete, but the idea is good though. This method is way better when it's use as a brush cutter, just use the appropriate blade of course.
Lol, That's a good example of how to determine the best time to use the safety gear. Just be sporadic and hope for the best. Who needs a safety glasses when your cutting weeds with a homemade saw anyway. But don't forget your gloves when you're handling a drill or a motor so can get caught around the bit.
U can use planetary gear motor or reduction gear motor...... Other tan that while using drill chuck for angle grinder blades instead use angle grinder chuck it comes custom built for 775 motor it's well balanced for 4" blade
Sir, Instead of giving sound or music you give the specification of the products used for the purpose with speech or write ups alongwith the video uploaded above.
In regards to the last video or the last segment of this video I should say few things when it comes to building your own DIY DC fan what any fan for that matter be sure to aim the prop blades turning in the direction towards the motor you need air to go across the motor to prevent from overheating and prolong the life of your project always be sure to use capacitors as they take the initial load off the battery also help and filtering any kind of frequency waves or stray frequency waves that you may have I guess better known as EMP interruption electro magnetic pulse which most of your 110 120 220 240 volt omit from time to time another cool suggestion you can completely take the battery away from that fan install it's called a blocking diode this prevents energy from going one way so it only allows electric to flow in One Direction a charge controller motor choke or simple resistor all parts you can find miscellaneous places online reinstall the battery ensuring that the diode is installed to receive power from the fan Take It Outside put it on your roof it may take a little while today or two however that fan will keep that battery charged maybe not enough to power a whole house but definitely enough to get your foot in the door and get you started my little 12-volt fan only generates 1/2 maybe 3 volts at a time however I do have a little tiny shed that I can keep actively lit-up with the Standalone battery and small stage wind turbine as long as you aren't living in such a place this would be ideal DIY Ben electrician for a long time still up watching these videos good job God bless good English by the way confidence is key my friend
Please, wear protections and tell your viewers that this is dangerous! To viewers, Please, if you do try to attempt these "hacks" (wich are just very dangerous), protect yourself and the others.
Simply superb sir. I bow my head to your excellance. I really have a doubt, how you are able to cut the stone slab corner with the help of a DC motor fixed in a wood with the screws. Is it possible really? Is it possbile to do all jobs? Any how ,, let me try. You could have thought that I am an experienced person in this jobs. No. Really I am a Commerce student. But would like to experiment in all the engineering jobs like you are doing. Thanks a lot.
Хобби
Worth watching buddy....👍
your style is very funny!!! a lot crazy!!! and you
not even seems swedish!!! i like it!!!
Like it very much, how they do it, more videos so that more people know & learn,thanks and god bless
One more thing. It's nice to see someone else venturing off from the RC hobbie to other forms of tinkering. 😁
Lots of good ideas there.
Thank you very much....Dr.Hacker.
That's is so cool, nice video my friend!
Yep if you're an idiot like him. :-))
Unique developments! I really like the crafts of this author
your remix of kayleigh sounds good please can you put a link for it thanks and grate video
Never seen so many ads in my life lol good ideas though
Hey there🕶️, whats the name of that market or pen (white) is that.im look for some too. And nice work and great content With the DC motors
Thanks
good video, Dr. hacker
where do yu get all those LiL motrs ? lotta neat ideas !
wow.. i like this video. i want make it too.
usefull ideas, very good works
Got a list of materials you used for these projects?
Realy awesome bro
i don't think Dewalt or Makita have anything to worry about at the moment :) thanks for the entertaining video though
Perfect
son buenas ideas,si llevan algun riesgo,pero aun con herramientas originales los hay,por no saber usarlas correctamente o darles usos que no se deben,por lo tanto al tener la precaucion debida estos proyectos pueden ser utiles
bien, el ultimo fue ingenioso LIKE.
so good
Very good ideas, but missing some safety gadgets and easy general improves.
26:00 you dont need a larger battery u need a geared motor for more torque less speed. or just a stronger motor.
For the car jack just hook up a car 12v plug with a switch and just plug it into your car.
That last project of yours, adding a extra fin thus increasing surface area giving you more air torque thus more blowing power, resulting in negligible loss of battery power due to increased air resistance 🔧..
This is for Dr.Hacker. I don't know if you will read this comment or not. I hope you do. But I wanted to tell you thank you for posting these videos. I find it very relaxing and therapeutic to your stuff up on a playlist and just let your videos play while I am working on my stuff. It's nice to be able to watch someone NOT do the things that would trigger that very negative OCD side of me. I always find the need to make everything perfect and what could potentially be a really awesome project turns into a nightmare and a pile of shit because I get hung up on simple stuff and have to undo and re-do over and over until eventually I have ruined what I am working on and have to either start over on what I'm working on, or give up on the project and never finish anything. It's nice to see with your videos that I don't have to always strive for perfection all the time. To just keep going and that when things get finished, these tiny things don't even matter because the final results are so much better. You are a very good craftsman and you are very skilled and very good at what you do. I envy your ability to look beyond the "flaws" I fear this coming across very badly. But I also feel lile you know what I am talking about. So I guess I'll finish with saying this.
Forget about all the negativity you will see from other people. Don't let that stuff drag you down. And I'm not going to say that other peoples opinions matter to you. Because there are those people out there that also think highly of what you are doing. On the same note don't let yourself drag ypu down with your own negativity in the same way. But I think sometimes our own opinions of ourselves will affect us more than other peoples.
I gotta get back to my projects now haha. Amother odd way of complimenting I guess haha, but. Your videos are nice because with ADHD I can play your videos and get back on task easier. The music choices in your videos aren't too distracting and kind of nice sometimes as background noise. Thank you for making these videos.
Muy buenos tus proyectos
Pero en Argentina donde consigo los motor citos
Muy bueno el video, ese motor grande en que máquina está ... Para conseguirla gracias.
Very Best
You using a MIG welder. What code electrodes you are using? 6013?
how did you loose your finger tip? in a hack creation , or something like that?
Nice
Genial...
Que motor é esse da furadeira e qual é o sistema de alimentação?
Saw blade on a jackobs chuck. Better hide behind a blast shield when that thing fails.
In the 3rd part of the video you have connected the motor with positive and connected the negative in switch mode. Is it right.? Sorry to say this please and rectify the same.
never hit the shaft of a motor in this way, you can break the engine or pull out one of the brushes
Nnnn
Good job 👍🏻👍🏻 🇮🇳 || Kuki 23|01|2022
Your Work is just Amazing !!!!
The Idea Blaster ğskskfjdhfhdbdjdcijsf
What do you call that you put in the dc motor on the 1st video?
wow, good job, these are actually useful if you want to build them!
cool
bhaiya please ye bata do a motor Upar Jo Lagaye hai Yeh Kahan Se milti hai
20:59 Well, it's easier/faster/economical to use a machete, but the idea is good though. This method is way better when it's use as a brush cutter, just use the appropriate blade of course.
nice
Muy pelígroso tiene cuidado capo
Lol, That's a good example of how to determine the best time to use the safety gear. Just be sporadic and hope for the best. Who needs a safety glasses when your cutting weeds with a homemade saw anyway. But don't forget your gloves when you're handling a drill or a motor so can get caught around the bit.
Without making such a long video, making a shortcut video would be very good
the disc oscilate too much you should fix that detail
wah keren banget...
Имитатор разума!))
U can use planetary gear motor or reduction gear motor...... Other tan that while using drill chuck for angle grinder blades instead use angle grinder chuck it comes custom built for 775 motor it's well balanced for 4" blade
Beast
nise video
Hello friend I love your videos and my one question where are you from?
An institute for the mentally ill probably!
But were we will get those moters
Notice 2nd henge on spring board added
mettre le bouton power en dessous est très étrange, car vous ne pouvez pa descendre pour couper les choses, haha
Dove le trovi quelle batterie che usi nei primi 3 video?
these are certainly heath n safety infringements to say the least - wonder if you ost the tip of your index finger using any of these?
Use car battery and jumper cables next time battery to weak
السلام عليكم ورحمة الله وبركاته اليوم صباح اليوم الأحد في هذا المجال ليكون منارة للعلم والمعرفة في
Sir, Instead of giving sound or music you give the specification of the products used for the purpose with speech or write ups alongwith the video uploaded above.
good idea
Yeah j really like the disc plate sander but what the heck do I need and where can I get some type of step by step instructions in a list
All you need is some wings for the fan and you can fly to the shops. Lolol
2 things, 1 learn how to join wire with solder and 2. Put a guards on that saw, you are an accident waiting to happen.
Terrible workmanship dangerous underpowered
Hes still got 10 Fingers !! Lets watch further Videos and count his Fingers !! :-)
Impressive work.
Shum e mir shqipe po paksa sa e rrezikshme ken ato sharrat klm..
gdzie takie silniczki kupić dajcie znać?
bela ideia
10:00 the chopper has running in wrong direction . 13:56 the disc sander out of round. Woow
Am I a bad person for hoping, just a little bit, that the second diy would teach the lesson of why we have guards on high rpm saws? Just a little?
Alguien sabe que tipo de motor es el que levanta la gata de auto del min 25
More like a 8 DIY finger chopping ideas, and by looking at your finger it looks like they really work.
Stfu
You know its safe when a guy with 9 1/2 fingers uses a grinding wheel for cutting...
😂😂😂👍👍👌
people do that all the time
🤣🤣🤣
Yakuza best carpenter, number one.
good
In regards to the last video or the last segment of this video I should say few things when it comes to building your own DIY DC fan what any fan for that matter be sure to aim the prop blades turning in the direction towards the motor you need air to go across the motor to prevent from overheating and prolong the life of your project always be sure to use capacitors as they take the initial load off the battery also help and filtering any kind of frequency waves or stray frequency waves that you may have I guess better known as EMP interruption electro magnetic pulse which most of your 110 120 220 240 volt omit from time to time another cool suggestion you can completely take the battery away from that fan install it's called a blocking diode this prevents energy from going one way so it only allows electric to flow in One Direction a charge controller motor choke or simple resistor all parts you can find miscellaneous places online reinstall the battery ensuring that the diode is installed to receive power from the fan Take It Outside put it on your roof it may take a little while today or two however that fan will keep that battery charged maybe not enough to power a whole house but definitely enough to get your foot in the door and get you started my little 12-volt fan only generates 1/2 maybe 3 volts at a time however I do have a little tiny shed that I can keep actively lit-up with the Standalone battery and small stage wind turbine as long as you aren't living in such a place this would be ideal DIY Ben electrician for a long time still up watching these videos good job God bless good English by the way confidence is key my friend
Using a philips bit whith pozidriv screws...sinner!
Please, wear protections and tell your viewers that this is dangerous!
To viewers, Please, if you do try to attempt these "hacks" (wich are just very dangerous), protect yourself and the others.
Very dangerous tools.
Pussies!
Mõnel pole midagi teha kui tahab leiutada jalgratast- kasuta tööks mõeldud riistu, pole lasteaiamänge vaja reklaamida.
You should use these skills to make money for yourself. Build stuff for people and charge them money.
Awesome work, dude! 😃
thank you 🙏
Pila batería o algo así dónde lo consigo
Battery how many volt?
hi bro, video useful
thank you 🙏
From where can i order this type of dc motor...also how should i calculate the load requirement to rotate a gear from this dc motor...??
Search 775 DC motor on Google, that's all I know, but it might be a different motor
EXELENTE Vdeo Máster 💪👀
thank you
It would have been helpful if you showed the names of the parts and where we can purchase them!!
I showed the names in my project though: ruclips.net/video/XSJGQf82sg8/видео.html
Berapa volt or amper ????
Simply superb sir. I bow my head to your excellance. I really have a doubt, how you are able to cut the stone slab corner with the help of a DC motor fixed in a wood with the screws. Is it possible really? Is it possbile to do all jobs? Any how ,, let me try. You could have thought that I am an experienced person in this jobs. No. Really I am a Commerce student. But would like to experiment in all the engineering jobs like you are doing. Thanks a lot.
excelente, sólo cambiaría el sentido de giro del motor en 9:50 para evitar recibir la rebaba en el rostro. Saludos.
Johnatan Serrano disculpe sabe q motor es el que se integro para levantar la gata
What's that at 0:30 on dc motor
बङी मोटर के कितने रुपये लगते है बताईये
Belle vidéos ces superbes merci beaucoup
new you tubers , i want to grow together.
Bravo!!! Super!!! Good Jop!!!
thank you
Продолжай искать...ищи себя,дружок-ищи...
Hi , mr , how do you charge your batterys??regards from Buenos Aires
You made a drill sander with a drill? Why not just put the sander in the drill?
no outlet for hot air to get out of motor
thin wires used which won't be able to take load of this 775 motor
soldering not done on switch
Herramientas sin proteccion. Mucho peligro