Important info: You can not use any usb-c cable with this system. you must use the usb c cables that they provide you with the gimble, or else it will not work.
So unless you use the focus pro hand grip, you only get 3 saved lens profiles rather than 15? Is there a way to use the focus hand grip in conjunction with the RS3pro and RS4 Pro?
When calibrating and fill the focal lenght of lens do i have to aply the cropfactor of the camera sensor size. For example do i fill in 24mm when i have a 16mm lens on a apsc sensor?
Does it mean that now i'm stuck with original DJI quick release plate and have no means on changing it? i can't find info anywhere on how to change to other quick release systems and still be able to use the focus motor with my Ronin =(
Probably because you were trying to use a photo lens (with no hard stops at minimal distance and infinity). There is no solution for this atm, but grabbing the lens focus ring and preventing it from rotating when the motor reaches the extreme points might help. Not from the first attempt though.
Important info: You can not use any usb-c cable with this system. you must use the usb c cables that they provide you with the gimble, or else it will not work.
Nice tutorial I finally got mines to work, I'm super excited to start shooting my next video
So unless you use the focus pro hand grip, you only get 3 saved lens profiles rather than 15? Is there a way to use the focus hand grip in conjunction with the RS3pro and RS4 Pro?
Same problem 😭
Awesome
NiC 😊 Good Information. To Anyone.. I ❤ DJI.. 😊😊
When calibrating and fill the focal lenght of lens do i have to aply the cropfactor of the camera sensor size. For example do i fill in 24mm when i have a 16mm lens on a apsc sensor?
@dji - Did all Focus Pro combos sell out and we are waiting new shipments or are new orders shipping later this week?
Does it mean that now i'm stuck with original DJI quick release plate and have no means on changing it? i can't find info anywhere on how to change to other quick release systems and still be able to use the focus motor with my Ronin =(
I bought the Pro LiDAR but I’ve only got a 2022 focus motor. Are these products incompatible?
nope only
talks to the new FF
@@markhoon7931 mine works fine with 2022 motors
Looking for a tutorial for the DJI Focus Pro in conjunction with a camera.
Where can I buy those arms for mounting the lidar when shooting vertically? I cannot find them on the website and it looks like they are DJI brand.
DUDE SAME. Legit cannot find this anywhere
@@zytnpltr I contacted support and they were unable to locate them for me, so I am assuming these are no longer made.
My PIP isn’t correct compared to my focus
Mine keeps failing to calibrate
Same here
Probably because you were trying to use a photo lens (with no hard stops at minimal distance and infinity). There is no solution for this atm, but grabbing the lens focus ring and preventing it from rotating when the motor reaches the extreme points might help. Not from the first attempt though.
Use two usb cables that worked for me however it keeps getting jammed when it hits the buckle of the focus belt
If my lens is 20-60mm. How much do I put when setting my focal length?
I heard half way between the minimum and maximum
Photo lenses don't work.
@@tecno8335photo lenses do work, you can either set manual start and end points OR apply a rubber titla focus ring with hard stops.
Is the system compatible with RS3 Pro?
yes, i use to use with my rs 3 pro before i switched everything over to rs4 pro