2023 Honda CR-V Hybrid - Oil Change
HTML-код
- Опубликовано: 28 авг 2024
- WARNING ⚠️
To remove Shield screws, please use PH3 size of the bit. It's a philips bit with cut off point that can be found in most screws bit sets. If you damaged the screw already, you can cut into it with a grinder and use flat screwdriver to turn it. New screws can be found at your local dealership, they always have them in stock for about $2 a peace.
Oil filter is the same filter that goes on 1.5L and 2.0L engines.
Oil type is 0W- 20 (fully synthetic only)
Oil Capacity:
1.5L - 3.7 Quarts
2.0L - 4.2 Quarts
Old part number: 15400-PLM-A02
New part number that ships in boxes now: 15400-RTA-003
If you found this information useful. Please award me with at least "Like".
Thank you.
WARNING:
To remove Shield screws, please use PH3 size of the bit. It's a philips bit with cut off point that can be found in most screws bit sets. If you damaged the screw already, you can cut into it with a grinder making cut in on the middle to use flat screwdriver so you can turn it. New screws can be found at your local dealership, they always have them in stock for about $2 a peace.
Oil filter is the same filter that goes on 1.5L and 2.0L engines.
Oil type is 0W- 20 (fully synthetic only)
Oil Capacity:
1.5L - 3.7 Quarts
2.0L - 4.2 Quarts
Thank you. I just changed my oil using your video. For the 2nd time. I changed at 2000 miles and now at 6000 miles. I didn't reset, so my next one will be free at the dealer. Mine is currently at 50%. Hopefully, I can take advantage of the free service at 10000 miles. I should do a tire rotation now, too. Thanks again.
I did my tire rotation at like 8k
official honda oil drain bolt Torque spec is 30ft lb. Oil filter is 3/4 turn from gasket contact.
Never click your torque wrench more than once. This is a practice learned from Honda factory rep. You are always supposed to change the crush washer. It helps to seal when the plug is properly torqued
Looks like I finally have an excuse to buy that impact driver I always wanted!
Yes yes yes buy it . !!! I never regretted. And it's affordable!! Not like $600.. Milwaukee always have deals . Includes battery charger. Or come with the extra ratchet. But please read description to this video!!!
I had the exact same problem with the four metal retaining screws. I managed to loosen two of them, but they were much tighter than necessary. I had to use a manual impact driver to break the last two free.
You’re the man what a great video thank you
I had the same issue with the screw on my 2024 accord hybrid! I did my first oil change at 850 miles getting ready to do my second at 3500 miles. The third will be a free one at 7500 by the dealer. After that I will do an oil change every 5000 miles. You need to get all the initial wear metal out of the engine!!
You can buy replacement screws as your dealership for $2. If u strip them. I put some silver antiseize on new ones and make sure you use Phillips screwdriver bit that market PH3. It's that thick one with cut off nose.
@@IvanRossS I didn't strip mine, but I could see they would be easy to strip. When I re-installed mine, I just snugged them up.
Watching because I have to do the job on this very car tomorrow.
Just bought a hybrid crv. I’ll miss how super easy it was to do an oil change with my Subaru. That aluminum shield and screws is too much extra work removing and putting it back on.
Will they do protect from any kind of damages, water and they provide better are dynamics which I rather have all these benefits and mess with this Shield.
It’s crazy the number of screws you have to unscrew to remove a shield that doesn’t fully cover😢.
Technically you only have to do it once.
Great video
Am taking my 2024 Honda Sport CRV Hybrid for the first oil change/filter at 550 miles. After that I will be change oil/filter at 3000mi/3 months intervals. I have been following this procedure on all my new vehicles since 1969. Always served me well. Have never been that strapped for money - no brag, just fact. 'Nuf said.....
I was told by Honda not to change the FIRST engine oil too early. The special engine oil from the factory is designed to lube and coat the engine and it is best to remain in the engine until the first manufacturer recommended oil change schedule. After the first oil change, you can change the engine oil early if you want. Prematurely doing the FIRST engine oil change will shorten the engine life.
Yes first oil do not change at 1000 or 2,000 miles.... some people do that lol. 6000 miles on first oil is more then enough
you was told? Well, then you should think and make your own decision whether you want to do so or not! As for me, all of my Honda and Toyota break in oil will get changed at 1000-1500 miles. Never, aside the one who got a turbo, has any problem. I sold the one with Turbo, you know what brand! The rest made it to 200k miles, so you decide yourself, what you got told is just a told!
You were told by Honda or a Honda dealership? I sincerely doubt either one of them knows what they are talking about.
There is a Toyota guy on YT that rips an engine apart and shows you what happens to an engine if you listen to the manufactures maintenance schedule. They want you to trash your engine outside of the warranty.
I changed my oil the day I bought it.
@@mccalejk2 general rule if the manufacturer says 10k miles they are bs you change it every 5k miles or slightly lower. I wouldn't change the oil in a new car immediately since the oil that comes from factory does help with break in. I think everyone knows you should baby your engine during the first 5k miles to help break it in so no harsh acceleration and such.
Change at 500 miles.
2:15 the screws of my 2024 crv has the same way over tighten 😆, I put synthetic grease on them for the next time it will be more easier to crack open them, nice video
I just changed my oil again myself. I had to replace all these damn screws and I went to dealership to get them for $2 each because I strip thread on all of them even worst. Originally using a wrong bit. You Have to use PH3 bit, the one with the flat nose. But I ended up putting antiseize on the thread not synthetic silicone. Hopefully they will come off easy next time.
@@IvanRossSyou can’t do nothing with them it’s way over tighten for no reasons, I opened them with big screw driver after i socked them with penetrating oil
Just a tip dont put the shield back up till you have fired it up to make sure there is no oil pressure light, you dont want to remove shield again if you forgot to tighten something or realized shoot forgot the filter :).
Well that's on you buddy
Pro tip: Don’t forget to torque drain bolt and put filter on tight…
Nice video!
I agree 👍🏽
Es increíble como pasa el tiempo cuando te vi la primera vez con tu fit y ahora una CRV 😇
Fit is my mother's car lol. She had it since 2012. Still running strong. Since 2012 I already changed 4 cars. Cadillac Catera then I was driving BMW 320i, Toyota RAV4 and now CRV.
My comment would be if you don't reset the oil % when you change the oil, can you wait till it's at say 15% can you have the dealer do every other oil change because they in California offering 2 years 24000 miles of free oil changes. So you can get at least every other oil change for free?
The Honda oil filter has torque spec on the filter if you rather tighten it to spec. Believe it’s around 13nm
Every 6 months or 5k whichever comes first. I am not waiting no 10k between oil changes hybrid or not per Honda recommendation.
I may consider doing some surgery on the shield. Having to remove and reinstall it with every oil change is ridiculous.
Yeah, Bad design. I have a RAV4 Hybrid and we have just 4 10mm bolts. Not torqued on.
You have issues with the screws because it’s a Japanese vehicle and you are using Phillips screwdrivers. It’s a JIS no 3 screw not Phillips. Please update your video description and stop telling people to use Philips screwdrivers.
@@thepiecesfit5049 ph3 work just fine here in America... it's very popular size and can be found in pretty much any bit it sets .. I was told by certified Honda mechanic to use ph3 and not to worry about it...
I have a new RAV4 Hybrid. Changed at 1.1k. Will change again at 5k. and then 5k intervals. Old school. I doubt very much that Honda uses break in oil.
Yes it’s more than sometimes 5k depending on your driving. The monitor and car should know how many miles you’ve driven from hybrid to gas only. 1k is too short to break it in.
i personally would use Amzoil oil and Honda has a oil filter cap tool
sure crush washer is a good idea, depends on the condition of it.
I have a oil cap tool all sizes, I just wanted to show the video something that you can buy pretty much everywhere. Even Walmart sell those pliers
@@IvanRossS i found that tool sometimes will crush the filter if it was too tight
i see you are using Milwaukee tools, awesome stubby, love the M18 inflator
@@TranTek well I'm not worried about crushing old flter lol. As long as it's not going to bust through and let oil come out. I never had this problem with this pliers
Those 2 screws that feel over tightened are exposed to the elements and rust. I recommend putting some grease on those 2 screws to prevent corrosion
get JIS #2 screw driver tips, they don't round out. Hondas use Japanese Industrial Standard Phillips which are slightly different
Please read descriptions to the videos !!!!! you can find a lot of useful information there !! Where I mentioned the same. But it's actually bit PH 3. JIS #2 still to round. I spoke actually with Honda mechanic and that what they use: PH3 bit. It's very common here in US and can be found pretty much in every bit set.
My 2023 CRV the same issues with the screws extremely tide.
Can you send me pictures of the level stick i took my honda for service but the oil level a show low the is normal
Thanks for the video.... When using the ramps, does that effect the drainage? (if the car is on an angle will it prevent all the old oil from draining?) Thanks
No lol. Of course not. And it will help to drain actually haha.
Three different screws? Honda please
changed my oil at 4800 miles thanks to your very good video are you going to rotate you tires I have a floor jack and jack stands bit I am unsure where to place floor jack to safety jack to crv up to get it on the jack stands where is safe place jack in the rear thanks
I take my car to Costco, $20 to balance all 4 wheels and rotation!!. Best deal ever. And I already did that 3 month ago. Rotation is just have of the job you have to balance wheels at least ever 10k too.
thanks I live in small town no Costco closeby maybe I can find some other place the last place I had it done local cross treaded wheel nut and I had to get lug replaced cost me 60 @@IvanRossS
Just curious if can change the two silver exhausts looking rings on the front bumper. Im going to buy this car, that is the only thing i want to mod.
You can change them on the OEM black ones. That’s what I did with mine
Can you show How to change transmission fluid Honda crv hybrid 2023 please 🙏
Maybe one day. Way to early for my car. I've 13k miles at this moment
@@IvanRossS Thank you 😊 🙏
When checking the dip stick, I find on my ‘24 Hybrid it’s in the center after just 3.5 quarts. Isn’t that odd? Curious what your dip sticks shows after adding 4.2 qts.
I just did an early oil change on mine at 500 miles . The oil was at the top hash mark of the stick . I measured what came out. 4.75 quarts . 😮 . I put 4.20 qts in, started vehicle, let it rest for 10 minutes and it was exactly half way between marks . So now I know correct position on dip stick .
Not 150 ft pounds on the screws. Factory assembled with blue loctite to keep the screws from vibrating loose
To break loose lpl. Probably took 150 if not 200
That bottom engine plate looks very light weight. Guess it will be no problem holding it up while you remove and replace the fasteners.
😊
Yes it's very very thin sheet of aluminum
Thanks for doing these I have the same car only 3600 on mine so far so I will be watching, the owner manual doesn't even show were the air filter is, been thinking of doing my own oil change I have had bad luck on my last car with free dealer oil change but it was not at not at Honda, I like to change oil at 5000 miles or 6 months i don't know if Honda will change it that soon for free so may have to do my self-thanks
They definitely will not change so early for free.
Dealers LOVE over torquing simple shit
My question is? I have a CRV 23 and it already has a little more than 3 thousand miles on it and I am in doubt about whether to take it to the dealership or change the oil myself!!!! I'm of the idea that if I want things to turn out the way I like them, do it yourself, let me explain!! Thank you..
Just change your oil yourself. Badoo not reset your oil change interval. When it reach to 15 present go ahead and take it to a dealership for a free oil change every Honda comes with two free oil change
Instead of adding oil to the filter, why not add a bit more while filling up from the top?
I don't think so you really listened to what I was explaining in the video....
I cannot understand why Honda attached the cover with 4 phillips screws and 4 slotted screws. Why not make them all one or the other?
Yes it's very stupid I'm going to replace mine with something else....
One more question can you change out the bolts on the bottom tray to hex head screws so they could be changed out with fewer issues from the overtightened screws?
Why not lol.... just get the screw, go to Ace Hardware store or any Home Improvement and make sure you get stainless steel screws and washer.
You probably added more oil than you should have. You don’t drain all the old oil out. You should always check the dipstick before you add the last quart or so.
Also, an impact wrench on plastic is never a good idea.
Trust me it's been checked and it's at the proper level.... I just never recorded it. Also where do you see a plastic ???... screws on the bottom are metal, threats that they going in are metal, shield on the bottom is also metal too
That aluminum shield...just another thing the dealership mechanic can cross thread for the customer. Why don't they make some kind of twist fasteners that you just twist with your fingers?
I'm looking to replace my bolts with hex, allen wrench Style head
@@IvanRossS I have a Tacoma with the factory skid plate that needs to be removed for an oil change. Dealership "mechanics" cross threaded a couple of them. Too many of these guys start their bolts using an impact wrench/socket. So dumb.
bc then they may just come off too easy on their own just from where theyre placed.
...но говорят наполнять фильтр не стОит. Воздух из системы лучше выходит пока фильтр сухой
Какой воздух ? :)
Doesn't Honda offer 2 years or 24K miles of complimentary oil changes with all new cars?
No. Only 2 free oil changes in that period
If you’re going to pre fill do it from the outside holes so it is filtered otherwise might as well leave it empty
The oil soaks through the filter, so it will be level in the filter. Therefore, it doesn't matter whether you fill from the middle or the outside. If you don't believe me, fill from the outside and then watch the oil fill up the middle of the filter.
Makes no sense! he's putting in clean oil. And as he stated the oil will absorb into the filter. . Good luck putting it through the holes..lol
What is the oil filter number for the CR-V hybrid sport?
Oli filter actually the same filter goes across all CR-V. So yes for 1.5L and 2.0L it's the same filter.
Old part number: 15400-PLM-A02
New part number that ships in boxes now: 15400-RTA-003
Great, thanks!
All Hondas except the S2000 use the same filter
Не можна заливати масло в новий фільтри. Це стара тєма. Буде воздушна пробка
😅😂😂😅😂😅😂😅 яка там пробка?
My is not the Hybrid version but the lx, is the oil change method is the same?
Should be the same it takes the same oil same filter the only the amount probably different because it's smaller engine 1.5 L not 2.0 L . Also every new Honda comes with two free oil changes. Look for a free oil voucher in your manual
@@IvanRossS does it need any extra maintenance?
Can you do a transmission fluid change video?
I will lol. Way to early for me. Have 15k on my car
@@IvanRossSI don't believe hybrid has transmission
Hi, Could you please provide all the tools required for maintainance and where to buy
Really....
А старое масло куда потом сдавать? Ну и фильтр тоже
Это всё сдаётся бесплатно в магазины деталей. Advance Auto Parts , AutoZone, O'Reilly. У меня большая канистра я потом когда на собираю большое количество Еду туда сливать
What is the oil change interval?
About 10k. Honda never tells you in miles... it's Honda. When it reached 15% on dash that's when you change
Watching this video tells me Honda is stopping at nothing to get the owner to bring it in for what ever reason.
Always remove oil filter first for new car.
Huh ?.... what are you talking about? You never remove oil filter first you have to drain the oil and then remote filter... Da......
@@IvanRossS Not remove but loosen - had issues where oil filter was difficult to remove - had to buy new wrench. Think about it. Oil drained and oil filter cannot be removed.
@@user-hz9dm6ji1w bro. I work on cars. I have all kind of oil filters in my shop. And with wrench I'm showing in the video you can pretty much remove Any filters
@@user-hz9dm6ji1w specially on New Car it will be Super easy to Remove because they installing filters using automatic torque wrench.... lol it's not like you took it to Jiffy Lubes and one of the guy who was high put 300 ftlbp on the filter
How much will you save if you do it yourself?
If not to be bougie by purchasing OEM oil you can get 5 quarts Castro or Mobil1 for $30 top + $10 for OEM filter or you going to pay roughly the same price for aftermarket Bosch or Mobil1 filter. So you're going to pay top $40 for full oil change if you do you self. If you take it to the dealer you going to pay over $100. If you take it somewhere to a cheap quick lube services it might going to be cheaper but you do not know if actually changed oil or filter properly. I do not trust those places
I think the main argument to change your own fluids is you knowing 100% what is happening. Even going to dealers, you get inconsistent information. For expample I went to 2 dealers and they gave me different information on my inspection reports. Any time I get a recommendation for a repair, I get a second opinion.
@@user-fx7wm8dt2r exactly, I've been changing my own oil on all of my cars for the pass 10 years.
I thought all of these new CR-Vs have two free oil changes. Why do this yourself when you already paid for it?
I did it just for the video lol. Just to put out video and be first!!
I change my oil every 5,000 miles. Honda won't do that, so I'll change mine at 5,000 and then let them change it at 10,000.
Be sure to leave the bottom panel off when you go for your oil change so they don't cross thread those fasteners. They'll probably also over-torque your plug and underfill your oil. If you want something done right, do it yourself.@@bretak74
Didn’t you get 3yr 36,000 free oil changes from Honda ! I did maybe it’s a Cali thing ✅
No. They change here for maintenance plan, alot of money when you buy a car. It did came with 2 free oil changes voucher only, but I will use it later. First oil change I wanted to do it myself and for this video
I would check. All 2023 Hondas come with 2 year of maintenance, by Honda. Check your sticker!
@@mchaarprado I will check but I'm in United States and I only had a voucher for two free oil changes
Слава Україні
ГЕРОЯМ СЛАВА
Слава Україні! 🇺🇦💙💛❤️
Slava UKRAINI!
Героям Слава
Political video
Sure. of course.. like I have nothing else to do and create all this videos and spent all this time just to wear ukrainian t-shirt... dude get lost, get a life, don't like it, don't watch it, goodbye....
Welcome to 🇺🇸 1st Amendment - freedom of speech!
Proud to be Ukrainian 🇺🇦 your Ivan !