Want more free stock footage and other video editing assets? Check out our countdown of the Top 10 Free Stock Video Websites: ruclips.net/video/vVSGwOCpPAI/видео.html
kay mixkit ke transaction ,fonts,presets ,use karane se copyright strike or copyright claim ata ha kay bhai plzz message i want this for premire pro plz reply
Hi, I have question plzzz fist of all thank for this Video. its very helpful. could you mauby explain how to use those template in Vertical? I tried to change the sequence sitting from 1920x1080 to 1080x1920 but it didn't work very well because you must to re-edit the size of the transition. when I tried to edit them I couldn't get the same results of the same horizontal transition. can you please help? many thanks, Amer
Big Thanks & Prayers for U. You are really kinf hearted, you are not asking for email and free download everything free... Thank you so much dude.. you are a life saver.. I Subscribed & liked your video.
Thanks for the tutorial, watched several videos for importing transitions but found your video very easy to understand...You ve got wonderful voice. keep it up
Hello. Firstly, thanks for the video. It's great. But I have an issue. I want to do all these effects to a 9:16 ratio. When the sequence is 9:16, the effect's not work well. What should I do?
Hi Undu. I really appreciate your work and was very excited using them all. But could you help me on fixing some problems? I'm just kinda bit new to premier pro (updated 2023). whenever I import and open the project file (for example zoom), it would always have this 4 frames during the transition itself (where the cut is located). actually all the 10 templates i had had the same problem. any tips on how to fix it? thanks !
Two quick questions: 1. What are your computer specs? Make, year, processor, RAM, graphics card, etc. 2. Have you tried rendering the timeline (or at least the transition section on the timeline)? My first guess is that you might not have the processor speed or GPU to properly preview the transition in the timeline... but it may actually work just fine when rendered.
@@UnduMedia the specs fits the job but it's really due to the transition from an old version of Premier to the new one (tempalte was made from an older version of premier). I think its a bug but I still haven't found solution to it :(
@@rickyricardo58 yup you need to downgrade your premier. i got the newest one but the template was made on a earlier version. thats the only way to fix it
In my project, the Left Sideways Swipe Transition effect is not working as expected. Instead of creating a smooth swipe transition, the video splits into four blocks, and the effect only applies within those blocks. I'm unsure if this is a settings issue or a bug.
I guess my only question being: Do the video clips need to be slow moving/slow motion for these to effectively work? I noticed all (if not most) of these clips are slow moving. Would these transitions work for fast paced clips, or am I watching the wrong video?
Great question. That will only work if your nest INCLUDES the video clips you want to apply the transition to. I.E. You can't nest the transition layers and drop that nest above your footage in the timeline. But you can drop the transition layers in your timeline, and then create a nest with those layers AS WELL as your footage. OR replace the placeholder clips in the transition with the end/start portions of your two clips (which is actually required for a few of the transition templates I didn't explicitly cover in the tutorial).
"Thank you for creating the instructional video; it's excellent. I'd like to ask, I've tried using it with 4k video files, and I encountered issues where it doesn't seem to work. Can you provide some guidance? I noticed that the video you created is in 4k resolution and transitions work seamlessly."
This is going to sound crazy... The transition templates are really only made for 1080p. You CAN manually upsize most of them... but that requires manipulating values for every layer in the transition. And it's time consuming. BUT... I really prefer uploading only 4K videos to this channel. So what I actually did was create the entire transition montage in 1080p (at which size the transitions work great)... then I upsized that video in After Effects (with Detail Preserving Upscale) and exported a lossless version of the montage at 4K, which I then added into my 4K tutorial. I screen-recorded the tutorial in 4K. But within Premiere Pro I was actually working on a HD sequence. Long answer... sorry. BUT it's worth pointing out that with the right settings (and decent source video) you can often export a 4K video from HD footage... and most people would never be able to distinguish the difference (particularly after RUclips adds its own compression).
No, sorry. If you really wanted to, you could try rotating the entire effect (many are left-right or up-down... so just use the one that's 90 degrees of what you want). You could also edit each layer in the effect appropriately, but it's a little time consuming.
I don't think this works with the new PP update. I did everything as the video, but the transition displays 4 square boxes in the middle from other random clips that are within my timeline. Rendered and all that, on the latest MAC release as well.
Hello! Anybody knows how to save a multiple layers transition to a preset? As you can see, most of transitions in Mixkit are coming in a project file. I want to save this transition resulting from the project file in a preset, but I can't because of the multiple layers. Also, if I want just to save the sequence in a preset, it doesn't work..
Thank you for your video! But [In and out zoom transition 47] doesn't work well. It says there is no "Elastic Transition" what should I do? Please help me.
It does look like the In and Out Zoom Transition 47 is missing a file... "Power Zoom Transition.mp4". But that isn't necessary for the transition effect... it's just a placeholder video clip I think. If you get a "Missing Media" warning when you import the project file (mixkit-47.prproj), just select "Offline" in the bottom right of that dialogue box. Once you've imported the project file, you should see a folder containing a sub-folder named "Assets" and a sequence named "Power Zoom Transitions". Open that up. You'll probably see a red "Media Offline" in the program monitor, and the missing media clip on the Video 1 track in the timeline. DELETE the clip on Video 1... you don't need it. After you deleted it from the timeline, you can also delete it from the Assets folder. All you need the are the adjustment layers on Video tracks 2, 3 and 4. Copy those 3 layers to YOUR sequence (with the cut points aligned with your cut point). That should do the trick.
Just found your channel. And man it's a life saver. Thank you for making this video. However. Downward split and bounce and all the others like that are kicking my but. I have no clue how to work out the placeholder stuff. The others are simple, copy and paste. But these are kicking my ass. Anyone else figured it out? Help?
Thank you, but I'm getting a bug with transitions that contain the zoom element. For example, with Zoom Transition and Sideways Zoom Transition, it starts off well, but then the second scene (the video that it transitions into) suddenly becomes a quarter of the screen. In Zoom Transition, I found out that it's the Mirror in the Adjustment Transition layer that is causing the problem. Though if I delete the Mirror in Effects control, the transition doesn't look as good as it does. How can I fix this? Much thx and appreceation.!
I'll try help as best I can. But first... 1. Have you tried rendering your sequence (or at least the section with the transition applied)? 2. Have you tried completely deleting the cache and preview files. 3. If neither of those solve the issue, what version of Premiere Pro are you using? And what are your sequence settings. In particular... Timebase, Frame Size, Pixel Aspect Ratio, Display Format, Working Color Space and which of the bottom three checkboxes are checked. Let's start with that.
@@UnduMedia Thank you so much for your quick reply as I'm in a hurry to fix this. 1. Tried render now, it didn't fix. 2. Deleted all cache and preview files, didn't fix. 3. I am using adobe premiere pro 2024 timebase: 23,976 frame size: 640 to 360 to 16:9 pixel aspect ratio: square pixels (1.0) display format: 23,976 working color space: Rec. 709 Only the Composite in Linear Color is checked. It turned out, the bug existed because of the frame size.Now that I changed it to 1920 to 1080 it works perfectly. Thank you very much
Did you turn "Insert and overwrite sequences as nests or individual clips" off? (Top-left icon in the timeline panel... should be white, not blue.) My first guess is that you didn't toggle that icon off, and that you dragged the full transition sequence into your timeline, rather than the individual clips from that sequence. If that doesn't solve it, I'd need to know which version of Premiere Pro you're on, which transition you're having trouble with, and what you mean by "dragged the transition to my sequence" (i.e. describe exactly what you did).
hi bro plz share with me the violin sound track link. really need it for my travel video project. will be grateful to you. tried a lot but failed to find it in mixkit or any other platform.
My first thought is that you may not have as recent a 2020 version as the transitions were created in. Only way to test that theory would be by updating to either (a) the most current version of Premiere Pro; or barring that... (b) 2020 release 14.9 (I think that's the last 2020 release... although you may won't find that available anymore). Until you're on a more current version, I don't know how to help you. I haven't come across anyone else being unable to open the files with a recent version of Premiere Pro. If you DO decide to update... I'd recommend NOT doing so if you're in the middle of a project. Premiere Pro is notorious for mucking up projects when you update major versions (and even more so if you skip a couple versions... like going from 2020 to 2023). It likely won't destroy your project entirely... but cuts between clips might change by a frame or two, or audio tracks may be slightly off... stuff like that.
What do i do if the transition isnt the same size as my video? I keep trying to scale to fram size but the transition is only covering one part of the vid
Unfortunately there's no "one-click" way to scale these transitions. And it would definitely be a case-by-case situation (depending on the layers/effects/clips making up the transition). Many of the transitions can be edited by scaling up each individual layer in the effect, and then adjusting the parameters of each effect on the layer. I've actually done this. But, to be perfectly honest, it can take a little time to get right. Sorry I don't have an easier solution for you.
I used your tutorial already in my last video editing "Alexandria" I upload it on my RUclips channel from 3 days, I hope you like it .. I promise to put your channel in the final of my next video in special thanks final list with all of my appreciation, Thank You :)
Unfortunately there's no simple, "one-click" method for resizing these transitions. They were all built for 1920x1080 resolution. Keep in mind... they ARE freebies. Several of the transitions CAN be scaled by scaling up each individual layer in the effect, and then adjusting the parameters of each effect on the layer. I've actually done this before myself. But, to be perfectly honest, it can take a little finessing/experimenting to get right. And, in your case... with a completely different aspect ratio as well... it might be tough.
I think that is probably due to your computer specs (possibly slow CPU or graphics card). Try rendering your timeline (or at least the portion with the transition). I'm betting it'll work then.
I've answered this numerous times in the comments. So to save a little time I'm copy/pasting a previous reply: Unfortunately there's no "one-click" way to scale these transitions. And it would definitely be a case-by-case situation (depending on the layers/effects/clips making up the transition). Many of the transitions can be edited by scaling up each individual layer in the effect, and then adjusting the parameters of each effect on the layer. I've actually done this. But, to be perfectly honest, it can take a little time to get right. Sorry I don't have an easier solution for you.
Dear @UnduMedia, Truly extraordinary skill and effort. Bless your hands and heart. Of course, it would be unfair not to congratulate this beautiful work. I would like to get information about the violin music you used in this video. Where can I get it? Is it free, if not where can it be purchased? Is it possible to share the link? Thanks
Thanks, Stefan. Most of my editing is on a spec'd out 2020 27" iMac (yup... I was one of those dummies who was too impatient to wait for the M1's at the time).
this so helpful, however i have downloaded my transition and i dont know how to download the " unzipped file" of the transition, so i dont get the the project file of the transition. please help.
PLEASE HELP, im following the steps you gave but in my asset folder there is only a adjustment transition not the zoom transition. Any way you can tell me what Im doing wrong?
Hey, Avery. Can tell me: 1. Specifically which zoom transition. 2. When you say "asset" folder, are you referring to the physical folder on the drive or the asset folder in the Premiere Pro project. If you can give me that info, I'll try help you more.
Only if you either: (a) Rotate them. But then of course any effects will be rotated. ... or... (b) Are willing to go into each effect layer and edit the necessary parameters to fit. I've done this before. But it can be a tedious process.
Hi Bro how are you ? Hope you are doing great ! I tried the transitions they are working great in 1080p resolution but when i am implementing it in 4k videos its not working properly and every resolution is not matching. will will plz make a tutorial on how we can implement these transitions in 4k videos especially downwards split and bounce transition that you are using n the beginning of transition. Plz help me out. I am trying to fix it from last one month but failed to do so. hope you will help me out.
None of them work as expected. Even after rendering, the effects still look subpar, and I'm better off without them, relying on default or downloaded presets instead. I've tried using adjustment layers, but they simply refuse to work as intended.
Want more free stock footage and other video editing assets? Check out our countdown of the Top 10 Free Stock Video Websites: ruclips.net/video/vVSGwOCpPAI/видео.html
You just a genius... More videos hv subscribed already... my entire class will hit the button soon
Thank you
kay mixkit ke transaction ,fonts,presets ,use karane se copyright strike or copyright claim ata ha kay bhai plzz message i want this for premire pro plz reply
I really like your honesty that you are not asking for email and free download everything free... Thank you so much dude.. you are a life saver..
My pleasure. Thanks for taking the time to leave a note!
This channel deserves millions of views and subscribers for the quality of work being done...
Extremely kind of you to say. We'll get there. Thanks!
dude, what is the voilin backgroung music and from where it is? i want that
I never seen before like this clear and effective explanation. I'm very impressed by this tutorial and also your voice so good. Thank you for all.
Thank you, that's very kind of you. I'm glad you enjoyed it.
Hi, I have question plzzz
fist of all thank for this Video. its very helpful.
could you mauby explain how to use those template in Vertical?
I tried to change the sequence sitting from 1920x1080 to 1080x1920 but it didn't work very well because you must to re-edit the size of the transition.
when I tried to edit them I couldn't get the same results of the same horizontal transition.
can you please help?
many thanks, Amer
WHERE YOU ABLE TO FIGURE IT OUT ?
Love from India ... Thanks for sharing these resources mate.💙💙
No problem. Thanks for the love!
Big Thanks & Prayers for U. You are really kinf hearted, you are not asking for email and free download everything free... Thank you so much dude.. you are a life saver.. I Subscribed & liked your video.
Thanks for the wonderful comment!
Thanks for this great tutorial. I still have a question, if I apply this transition to a vertical video, how can I adjust the size?
Damn I needed this. Subscribed and thanks for the great content!
Glad I could help. Thanks for subscribing and thanks for the great comment!
A Green Beret left a comment on my silly little video editing channel. How cool is that?
Thanks for the tutorial, watched several videos for importing transitions but found your video very easy to understand...You ve got wonderful voice. keep it up
Thank you very much for the encouragement!
@@UnduMedia My Pleasure .
Thank you so much bro, your tutorial worked, keep going!!!
Thanks! I appreciate the comment and encouragement.
Love these transitions so easy to use and install
Glad you like them!
but i failed to download it
I'm trying to edit this in reel format (1080 x 1920) but it distorts the image when I drag and drop the transiiton. Is there any way to fix this?
Hello. Firstly, thanks for the video. It's great. But I have an issue. I want to do all these effects to a 9:16 ratio. When the sequence is 9:16, the effect's not work well. What should I do?
Great way to help beginners...I wish u have other videos on affect effect
Hoping to get to After Effects as well at some point. Just not enough hours in the day, lol. Thanks for taking the time to leave a a comment!
Yr welcome...all great deeds deserve at least some kind of grated
Discovered your channel. Liked. Subscribed. Thanks! All the best!
Awesome. Thank you. And likewise!
thanks man this thing worked thanks a lot man love lots keepsafe!!!
You're welcome. Glad it helped!
Hi Undu. I really appreciate your work and was very excited using them all. But could you help me on fixing some problems? I'm just kinda bit new to premier pro (updated 2023).
whenever I import and open the project file (for example zoom), it would always have this 4 frames during the transition itself (where the cut is located). actually all the 10 templates i had had the same problem. any tips on how to fix it? thanks !
Two quick questions:
1. What are your computer specs? Make, year, processor, RAM, graphics card, etc.
2. Have you tried rendering the timeline (or at least the transition section on the timeline)?
My first guess is that you might not have the processor speed or GPU to properly preview the transition in the timeline... but it may actually work just fine when rendered.
@@UnduMedia the specs fits the job but it's really due to the transition from an old version of Premier to the new one (tempalte was made from an older version of premier). I think its a bug but I still haven't found solution to it :(
@@SucculentsandSpikes did you finally figure it out? I am having the same issues, about to give up.
@@rickyricardo58 yup you need to downgrade your premier. i got the newest one but the template was made on a earlier version. thats the only way to fix it
@@SucculentsandSpikes thanks for your reply.
Man, you really deserve a big round of applause. Thanks!
Thank you very much. Appreciate the support!
Thank You for this amazing exposition.
You're very welcome. Thanks for the comment!
In my project, the Left Sideways Swipe Transition effect is not working as expected. Instead of creating a smooth swipe transition, the video splits into four blocks, and the effect only applies within those blocks. I'm unsure if this is a settings issue or a bug.
LIFESAVER, AWESOME
Glad it helped!
could you please tell us what is the name of the music that used on this video? by the way thank you so much for this free transition
I guess my only question being: Do the video clips need to be slow moving/slow motion for these to effectively work? I noticed all (if not most) of these clips are slow moving. Would these transitions work for fast paced clips, or am I watching the wrong video?
Thank you very much for video 🙏. Is it possible to nest transition layers and put nested layer top?
Great question. That will only work if your nest INCLUDES the video clips you want to apply the transition to. I.E. You can't nest the transition layers and drop that nest above your footage in the timeline. But you can drop the transition layers in your timeline, and then create a nest with those layers AS WELL as your footage. OR replace the placeholder clips in the transition with the end/start portions of your two clips (which is actually required for a few of the transition templates I didn't explicitly cover in the tutorial).
Great Hundu, all great 👍. For music maybe... it's found in "envato elements", title Epic Strings (speeded up and adapted) ??
you have done a great job it is really helpful
Thank you very much. Glad it helped.
dude, amazing work! Thank you so much!
Thank you! Very glad you enjoyed it.
Very clear tutorial . Thanks bro 😍
Thank you very much. Glad you enjoyed it.
Thanks for Sharing and you got yourself a new Sub!
Fantastic! And thanks!
Bro thank u sooooooo much I work's bro I look up so much tutorial and this is the only one that work
No problem. I'm glad it helped!
Im definitely trying this tonight!!!
Great to hear!
I have 4k video but the transition is lot smaller. How can i Simply fix it? Can you give some basic instruction?
I have same issues too. Did you by any chance find a way to fix it?
Hey buddy , I got the same issue , have you found anything to solve it?!
i tried to put it on a vertical video.. how can i adapt it to 1080x1920??
This is insane! Thank you for introducing me to MixKit!
Glad you found it helpful. Thanks for the nice comment!
"Thank you for creating the instructional video; it's excellent. I'd like to ask, I've tried using it with 4k video files, and I encountered issues where it doesn't seem to work. Can you provide some guidance? I noticed that the video you created is in 4k resolution and transitions work seamlessly."
This is going to sound crazy...
The transition templates are really only made for 1080p. You CAN manually upsize most of them... but that requires manipulating values for every layer in the transition. And it's time consuming.
BUT... I really prefer uploading only 4K videos to this channel. So what I actually did was create the entire transition montage in 1080p (at which size the transitions work great)... then I upsized that video in After Effects (with Detail Preserving Upscale) and exported a lossless version of the montage at 4K, which I then added into my 4K tutorial.
I screen-recorded the tutorial in 4K. But within Premiere Pro I was actually working on a HD sequence.
Long answer... sorry. BUT it's worth pointing out that with the right settings (and decent source video) you can often export a 4K video from HD footage... and most people would never be able to distinguish the difference (particularly after RUclips adds its own compression).
Hey buddy , I got the same issue , have you found anything to solve it?!
Very clear and well-delivered tutorial. Thanks!
You're very welcome! Glad you enjoyed it.
Is there anywhere to change this for vertical videos?
No, sorry. If you really wanted to, you could try rotating the entire effect (many are left-right or up-down... so just use the one that's 90 degrees of what you want). You could also edit each layer in the effect appropriately, but it's a little time consuming.
Thanks so much for this tutorial!!
You're very welcome. Thanks for leaving a comment!
You are such a great tutor. It was easy to digest...
Thank you very much! I appreciate the kind words.
this was AMAZING!
Thanks! Glad you enjoyed it.
I don't think this works with the new PP update. I did everything as the video, but the transition displays 4 square boxes in the middle from other random clips that are within my timeline. Rendered and all that, on the latest MAC release as well.
Which transition?
I also have this problem with the zoom transition from mixkit
Hey buddy , I got the same issue , have you found anything to solve it?!
This is amazing. Thanks a lot!
Glad it was helpful!
how to use these transactions to diffrent vertical sequences? I tryed copy paste but it's not working?
when i copy to my 4k sequence clip, its not working properly. please help
Awesome No Words For U 🤟🤟
Thanks so much!
Great channel. Great content
Thank you very, very much! Appreciate it!
Great Tutorial! Really easy to follow. Thank you!
Thank you so much. Glad you enjoyed it!
Hello! Anybody knows how to save a multiple layers transition to a preset? As you can see, most of transitions in Mixkit are coming in a project file. I want to save this transition resulting from the project file in a preset, but I can't because of the multiple layers. Also, if I want just to save the sequence in a preset, it doesn't work..
Hey will you please tell me which background music did you use in this video?
AWESOME!!!!!! Thank you!!!
You're welcome! Glad you liked it!
Thank you so much🙏
You're very welcome! Thanks for the comment!
Thank you for your video! But [In and out zoom transition 47] doesn't work well. It says there is no "Elastic Transition" what should I do? Please help me.
It does look like the In and Out Zoom Transition 47 is missing a file... "Power Zoom Transition.mp4". But that isn't necessary for the transition effect... it's just a placeholder video clip I think.
If you get a "Missing Media" warning when you import the project file (mixkit-47.prproj), just select "Offline" in the bottom right of that dialogue box.
Once you've imported the project file, you should see a folder containing a sub-folder named "Assets" and a sequence named "Power Zoom Transitions". Open that up. You'll probably see a red "Media Offline" in the program monitor, and the missing media clip on the Video 1 track in the timeline.
DELETE the clip on Video 1... you don't need it. After you deleted it from the timeline, you can also delete it from the Assets folder.
All you need the are the adjustment layers on Video tracks 2, 3 and 4. Copy those 3 layers to YOUR sequence (with the cut points aligned with your cut point).
That should do the trick.
@@UnduMedia THANKS SO MUCH!!! It works well!!! Have a great day
You're very welcome. Have a fantastic day as well!
Just found your channel. And man it's a life saver. Thank you for making this video. However. Downward split and bounce and all the others like that are kicking my but. I have no clue how to work out the placeholder stuff. The others are simple, copy and paste. But these are kicking my ass. Anyone else figured it out? Help?
this was awesome. thank you so much!
Glad you liked it. Thanks!
Excellent!
Thanks!
thanks for your efforts
My pleasure. Thanks for the comment.
nice, whats the music title Again? thanks for the wonderful video
Thanks man !
You bet! Thank you!
God bless you. You are the best🥰
Thank you very much. That makes us tied for the best!
name of starting music pls
Thank you, but I'm getting a bug with transitions that contain the zoom element.
For example, with Zoom Transition and Sideways Zoom Transition, it starts off well, but then the second scene (the video that it transitions into) suddenly becomes a quarter of the screen.
In Zoom Transition, I found out that it's the Mirror in the Adjustment Transition layer that is causing the problem. Though if I delete the Mirror in Effects control, the transition doesn't look as good as it does. How can I fix this? Much thx and appreceation.!
I'll try help as best I can. But first...
1. Have you tried rendering your sequence (or at least the section with the transition applied)?
2. Have you tried completely deleting the cache and preview files.
3. If neither of those solve the issue, what version of Premiere Pro are you using? And what are your sequence settings. In particular... Timebase, Frame Size, Pixel Aspect Ratio, Display Format, Working Color Space and which of the bottom three checkboxes are checked.
Let's start with that.
@@UnduMedia
Thank you so much for your quick reply as I'm in a hurry to fix this.
1. Tried render now, it didn't fix.
2. Deleted all cache and preview files, didn't fix.
3. I am using adobe premiere pro 2024
timebase: 23,976
frame size: 640 to 360 to 16:9
pixel aspect ratio: square pixels (1.0)
display format: 23,976
working color space: Rec. 709
Only the Composite in Linear Color is checked.
It turned out, the bug existed because of the frame size.Now that I changed it to 1920 to 1080 it works perfectly.
Thank you very much
Hey buddy , I got the same issue , have you found anything to solve it?!
Thanks for the tutorial man. But may I know why in my situation when i dragged the transition to my sequence, there's just black
Did you turn "Insert and overwrite sequences as nests or individual clips" off? (Top-left icon in the timeline panel... should be white, not blue.)
My first guess is that you didn't toggle that icon off, and that you dragged the full transition sequence into your timeline, rather than the individual clips from that sequence.
If that doesn't solve it, I'd need to know which version of Premiere Pro you're on, which transition you're having trouble with, and what you mean by "dragged the transition to my sequence" (i.e. describe exactly what you did).
This is very helpful
Glad it helped. Thanks!
Thank you so much man! You have no idea how much this helped me with my gaming montage.
Glad it helped! Thanks for leaving a comment!
hi bro plz share with me the violin sound track link. really need it for my travel video project. will be grateful to you. tried a lot but failed to find it in mixkit or any other platform.
Thanks for the tutorial but I can't import or open the asset with my premiere pro. I'm using Premiere 2020 version... I really need your assistance.
My first thought is that you may not have as recent a 2020 version as the transitions were created in. Only way to test that theory would be by updating to either (a) the most current version of Premiere Pro; or barring that... (b) 2020 release 14.9 (I think that's the last 2020 release... although you may won't find that available anymore).
Until you're on a more current version, I don't know how to help you. I haven't come across anyone else being unable to open the files with a recent version of Premiere Pro.
If you DO decide to update... I'd recommend NOT doing so if you're in the middle of a project. Premiere Pro is notorious for mucking up projects when you update major versions (and even more so if you skip a couple versions... like going from 2020 to 2023). It likely won't destroy your project entirely... but cuts between clips might change by a frame or two, or audio tracks may be slightly off... stuff like that.
@@UnduMedia Thanks for your help... I was able to get the updated version.
I absolutely don't know, how to get there Falling Box Transition.
Thank you for this video, you're a lifesaver
You're welcome. Glad it helped!
Amazing job here! Well done and thank you.
Thank you! Cheers!
Hey Undu, great job. Kindly tell me the sfx name you used with transition 8, or the link to the sfx.
Thank you!!
Transition names and links are in the description. Follow this link and look for "Falling Box":
mixkit.co/r/undu-transitions
@@UnduMedia thank you. What about the sound effect you used on transition 8?
Ah... right... I used "Mechanical Tool Click", which you'll find here:
mixkit.co/free-sound-effects/click/
(I kinda sliced it up to make it work)
@@UnduMedia fantastic, thank you so much for your help.
No problem!
What do i do if the transition isnt the same size as my video? I keep trying to scale to fram size but the transition is only covering one part of the vid
Got the same problem. Any Ideas?
Try using the transform effect to scale everything up instead of the motion drop down.
Select the fx and go to effect control and at the align ment you can set it in to centere at the cut
Hey buddy , I got the same issue , have you found anything to solve it?!
Very nice but what if I have a total other sequence sizes like when shooting on 1.33 anamorphic? Is there a way to scale the transition?
Unfortunately there's no "one-click" way to scale these transitions. And it would definitely be a case-by-case situation (depending on the layers/effects/clips making up the transition).
Many of the transitions can be edited by scaling up each individual layer in the effect, and then adjusting the parameters of each effect on the layer. I've actually done this. But, to be perfectly honest, it can take a little time to get right.
Sorry I don't have an easier solution for you.
Thank you for this video
My pleasure. Thanks for the comment!
What's the version of pre premier pro, I'm using older version but its says it's compatible for newer version...
Premiere Pro 2020.
@@UnduMedia thanks
Thank you alot, it was very useful tips .. I am honor to subscribe your channel :)
Thanks. Appreciate it!
I used your tutorial already in my last video editing "Alexandria" I upload it on my RUclips channel from 3 days, I hope you like it .. I promise to put your channel in the final of my next video in special thanks final list with all of my appreciation, Thank You :)
plz can you me the bgm you are using in the starting of your video
Just discovered your channel. WOW. Great work on this one! Informative and super clean. Well. Freaking. Done.
Thank you very, very much. Appreciate the encouragement more than you know.
Thanks so much, I have liked and Subscribed
Thank you very much for both!
thanks bro 😍😍😍
You're welcome!
I want to apply those transition in 2560x1080 size video, but transition size is 1920x1080, so it doesn't work properly. How can I solve this problem?
Unfortunately there's no simple, "one-click" method for resizing these transitions. They were all built for 1920x1080 resolution. Keep in mind... they ARE freebies.
Several of the transitions CAN be scaled by scaling up each individual layer in the effect, and then adjusting the parameters of each effect on the layer. I've actually done this before myself.
But, to be perfectly honest, it can take a little finessing/experimenting to get right. And, in your case... with a completely different aspect ratio as well... it might be tough.
@@UnduMedia Thank you for your kind answer. One more question, what is '1920x1080.jpg' used for?
Thanks, now i'm have to collect and put them in one sequence for future use😢
Been there. Done that.
sometimes transitions doesn't work, the screen split to 4 same picture during the transition, how can I fix that?
I think that is probably due to your computer specs (possibly slow CPU or graphics card). Try rendering your timeline (or at least the portion with the transition).
I'm betting it'll work then.
how can we edit the duration of the transitions?
I'm not sure but you can probably use adjustment layer in this one
thanks for
your help
You're very welcome. Thanks for commenting.
How to change transition resolution size for different resolution size sequence.
I've answered this numerous times in the comments. So to save a little time I'm copy/pasting a previous reply:
Unfortunately there's no "one-click" way to scale these transitions. And it would definitely be a case-by-case situation (depending on the layers/effects/clips making up the transition).
Many of the transitions can be edited by scaling up each individual layer in the effect, and then adjusting the parameters of each effect on the layer. I've actually done this. But, to be perfectly honest, it can take a little time to get right.
Sorry I don't have an easier solution for you.
Thank you for your response.@@UnduMedia
Thanks!❤🔥
You're very welcome!
WOW...awesome
Thank you very much. Glad you enjoyed!
Dear @UnduMedia, Truly extraordinary skill and effort. Bless your hands and heart. Of course, it would be unfair not to congratulate this beautiful work. I would like to get information about the violin music you used in this video. Where can I get it? Is it free, if not where can it be purchased? Is it possible to share the link? Thanks
Nice video man.. What Mac do you use?
Thanks, Stefan. Most of my editing is on a spec'd out 2020 27" iMac (yup... I was one of those dummies who was too impatient to wait for the M1's at the time).
Thanks for informing 😅
You're very welcome. Thank you!
bro i have downloaded but , in that zip file there is only an sample and a project there are no assest..... so what should i do ?
Which transition?
this so helpful, however i have downloaded my transition and i dont know how to download the " unzipped file" of the transition, so i dont get the the project file of the transition. please help.
Do you not have an unzipping utility/app on your computer? On most, you should be able to right-click the zip file and extract the contents???
PLEASE HELP, im following the steps you gave but in my asset folder there is only a adjustment transition not the zoom transition. Any way you can tell me what Im doing wrong?
Hey, Avery. Can tell me:
1. Specifically which zoom transition.
2. When you say "asset" folder, are you referring to the physical folder on the drive or the asset folder in the Premiere Pro project.
If you can give me that info, I'll try help you more.
from where you got this background music and is it free to use?
Will these transitions work on 1080 x 1920 vertical videos as well?
Only if you either:
(a) Rotate them. But then of course any effects will be rotated.
... or...
(b) Are willing to go into each effect layer and edit the necessary parameters to fit. I've done this before. But it can be a tedious process.
any way to save this bin file of transitions so that i can import it to new projects
Any of the transition project files can be imported into any other project.
Hi Bro how are you ? Hope you are doing great ! I tried the transitions they are working great in 1080p resolution but when i am implementing it in 4k videos its not working properly and every resolution is not matching. will will plz make a tutorial on how we can implement these transitions in 4k videos especially downwards split and bounce transition that you are using n the beginning of transition. Plz help me out. I am trying to fix it from last one month but failed to do so. hope you will help me out.
Hey buddy , I got the same issue , have you found anything to solve it?!
I've replicated the process step-by-step, but my transition remains awfully clunky. What's the missing piece?
Which transition, if I may ask. And... have you rendered the sequence (or at least the transition portion)?
Hey buddy , I got the same issue , have you found anything to solve it?!
None of them work as expected. Even after rendering, the effects still look subpar, and I'm better off without them, relying on default or downloaded presets instead. I've tried using adjustment layers, but they simply refuse to work as intended.