Looks great but in the Northeast. I can’t see it lasting more than 5 Freeze , thaw cycles without breaking apart. Old time masons always say never coat concrete
I’m so glad I ran into this video ! Can you please tell me what roller frame and pole your using. And also what’s the UV protection like? I’m from Southern California and my pool deck gets absolutely zero shade. And I subscribed ti both of you 🫡
@@thatsallfolks3115 18" frame, 3/8" to 1/2" nap will work fine. Pretty resistant to UV and can be recoated years down the line with power wash and recoat.
crazy u made this video. I literally just posted a similar video this weekend. the pool deck we did was better structurally. (no cracks) We used a tinted sealer (not translucent) that is not paint. The concrete supplier we use actually tints it in the shop, they can do tons of colors so it's an acrylic sealer. not a paint. not water based. we just power washed it and as hot as it was last week it dried in an hour. of course just like w stamp concrete you can blow dry it w a leaf blower. I prefer the 3/4 roller as well. i couldn't tell if it was the same product we use, I think it is, but the say it's not a paint, it's a sealer, but I really am thinking about offering this as a service, especially since it is getting harder and harder to get concrete. but overall I think it made her pool deck look basicly brand new again. it's crazy when u see another creator post a video that is basically the same video as you!!!! (btw the stuff we used is called a sealer but it's more like a paint but they Def say it's not a paint) we only needed to do 1 coat. so it may not have been the same stuff
the thing about the stuff we used it has xyelene in it, so if it has solvent based sealer on it prior too it will bond because I t obviously re-emusifys the prior sealer. I like how u went over 3 products to be able to get at least an 8 min video. because like I said w only 1 product there was just not enough to talk about w only 1 product. I watch your channel not only to learn about concrete stuff that I may do a different way or maybe have never seen like turning the chute around backwards for basements but I also like to watch your videos to learn about youtube stuff like the affiliate links or different things like how to talk to a customer. I was talking to my buddy from Cadillac concrete products and he said he knows you too and had good things to say about you
I had Mortex Kool Deck invented in 1962 can't get anything cooler to walk on bear foot., I'm in AZ where it's hotter then hell in the summer. I had been talked into acrylic lace that stuff was like walking on hot coals in the summer. After about 10 years it peeled up in sheets that Acrylic lace.
@@Guvnor1923 Haven't called them yet I think the price will be high to remove the old stuff well see. Probably getting too hot to install it even if they say it can be done I'm not so sure rather wait till the fall. Unless it's super expensive I'm going to have the Mortex Kool Deck put back in like it was prior to 2007.
Hi Mike, Awesome info and videos, thank you. 🙏 I have one quick question, that concrete hand held grinder… can you tell me the make, model and what disc pad you utilized? Was it connected to a vacuum? Can you tell me which one that was? Thanks again.👍
Great content as always. It looks like Sherwin Williams isn't going to have any of their elastomeric products for a year or 2. Not sure why, but they are really falling behind the curve with industrial coatings since last year. Cheers Mike & crew!
Great video. I have an issue with my concrete around my in-ground pool it’s Stained with sherwin Williams H an C ColorTop. I power wash and clean the concrete every year before staining I’m trying to figure out why the concrete stain is peeling every year i get the same results.I contacted Sherwin Williams. Seen this video looking for some help. Thank you.
I use quartz crystal blends- s grade in polyphatic resin. Double broadcast. With a texture coat on top. So durable natural antiskid. Awesome for pool patios
Great video! What grinder do you recommend to use to remove that top layer? Maybe where I can buy something similar to the handheld grinder that you used on this job. Thanks
Hi Mike. Just love your video and helped so much. Can you please tell me the color that you used in the above video when painting the pool deck?. Would like to use the same color myself. Thanks so much..
Love your channel, I'm learning so much. Im getting ready to paint/coat my pool deck and am considering grinding instead of pressure washing it like you did in this video. Is the grinder tool your using something that can be rented?
I pressure washed my patio good, and took it down to the concrete in most areas, but some previous paint will not come off. There is no flaking at all, but wonder if I can still paint right over what existing paint there is, or do I have to etch or prime the patio first? Advise needed badly :)
No. Any dirt, leaf, sand or anything that gets on it stands out shockingly bad. Have to clean it everyday. I wish I'd made some kind of pattern in coloring. Anything would've looked better.
My friend from grade schools Concrete Company went under, handed down from his Dad, been running since before '91 when I started hanging with him on BMX bikes, not sure what happened or why it closed. Kinda a bummer.
what do you think about a thin coat of quickcrete to repair? need to work out a solution for my dads house. ill keep this paint in mind and being from NJ i should get it fast
@Mike Day Thank you for your service of sharing your expertise! Do you recommend this for garage floors? If not, then what do you recommend? Thanks in advance.
I just put on Foundation Armor SX5000 sealant on my new concrete decking. Looking to color the concrete. Would this product bond properly over my sealant? If not, is there another product you recommend?
Hello I’m interested Tom Sarem how to paint my concrete under my deck that someone destroyed the design with the grinder with her was pressure washing it supposedly
I have 2000 square feet of concrete that was coated with resurfacer 15 years ago. Half of it has popped up. It was colored with bright white. Could this work if I ground the concrete smooth?
Extremely helpful video,do you have to keep a wet edge,would you experience a difference if you roll the edges and roll a few minutes later? Do you charge by the square footage? I would like to start doing this because it looks profitable
Hi Mike, my pool has what I've been told is something called cool pad? You have to stipple it and then trowl down the stippling. In my opinion, it was a botched job, because they didn't trowel the stipling well, so you can't walk barefooted on it in a lot of places and there are several places where it's coming up off the concrete. My question is how would you redo this?
I called my local Sherwin Williams and Lowe’s and neither of them carry them. Is there another location to try or a similar product from a different brand? Thanks
God I wish you guys were local cause I had a concrete surface poured last fall in back of my home and the people who did it had no freaking clue what they were doing. Long story short, I need need to have the whole surface refinished and sealed cause it looks absolutely horrid.
I have a few questions for you. How does this Mapecoat coating work on a concrete carport? Does it do ok with car tires on it? Any suggestions for that type of application? I have just a porch and patio paint on there now and it is flaking very bad especially after all the rains we got this last winter. Thanks!
Putting more energy into the application process, like lifting your roller on the fwd stroke each time in the last rolling as you go, so as to mot leave roller marks, in the end. Jus sayin.
Hi Mike, How many years would the paint last? I have over 1000 sq feet concrete backyard uncovered. Its almost 40+ years old and looks old and tired. I am planning to paint it using porch and floor paint from Sherwin williams, what is are your thoughts? Is it worth the investment? will it last? I am in CA.
Love that you grind instead of pressure washing👍 totally trust that bond!
Always!
Looks great but in the Northeast. I can’t see it lasting more than 5 Freeze , thaw cycles without breaking apart. Old time masons always say never coat concrete
In Midwest best to use color dye mixed in with the motar. No worries of peeling, flaking etc. 👍
our stuff was $75 a gallon so it's pretty pricey but I thought it was so worth it compared to what it looked like b4 hand
Looks nice in the beginning but how long does that product last and when it starts to peel you have to repeat the whole process.
Mike this is Alessio from NJ Decorative Concrete Supply, I appreciate your video and your shout out in the description. Keep up the good work
Thanks, I love all the work you do to. I should come to NJ and work with you guys on a project!
I’m so glad I ran into this video ! Can you please tell me what roller frame and pole your using. And also what’s the UV protection like? I’m from Southern California and my pool deck gets absolutely zero shade. And I subscribed ti both of you 🫡
Alessio, I live in NJ and I am interested in this Mapecoat Deck T. Can I order it from you? Thanks.
@@thatsallfolks3115 18" frame, 3/8" to 1/2" nap will work fine. Pretty resistant to UV and can be recoated years down the line with power wash and recoat.
@@Alessiothetruth thanks
Looks brand new! I have a 10'x25' patio to paint. Thanks for sharing this! 💯
Hi Mike. Incredibly inspirational video. For the 9" hand grinder, what type of blade did you use?
crazy u made this video. I literally just posted a similar video this weekend. the pool deck we did was better structurally. (no cracks) We used a tinted sealer (not translucent) that is not paint. The concrete supplier we use actually tints it in the shop, they can do tons of colors so it's an acrylic sealer. not a paint. not water based. we just power washed it and as hot as it was last week it dried in an hour. of course just like w stamp concrete you can blow dry it w a leaf blower. I prefer the 3/4 roller as well. i couldn't tell if it was the same product we use, I think it is, but the say it's not a paint, it's a sealer, but I really am thinking about offering this as a service, especially since it is getting harder and harder to get concrete. but overall I think it made her pool deck look basicly brand new again. it's crazy when u see another creator post a video that is basically the same video as you!!!! (btw the stuff we used is called a sealer but it's more like a paint but they Def say it's not a paint) we only needed to do 1 coat. so it may not have been the same stuff
the thing about the stuff we used it has xyelene in it, so if it has solvent based sealer on it prior too it will bond because I t obviously re-emusifys the prior sealer. I like how u went over 3 products to be able to get at least an 8 min video. because like I said w only 1 product there was just not enough to talk about w only 1 product. I watch your channel not only to learn about concrete stuff that I may do a different way or maybe have never seen like turning the chute around backwards for basements but I also like to watch your videos to learn about youtube stuff like the affiliate links or different things like how to talk to a customer. I was talking to my buddy from Cadillac concrete products and he said he knows you too and had good things to say about you
Is the paint slippery or can you add a sealer with grit in it
@@GRUBB-MUDDwhat's the tinted sealer you used?
Great job, guys!
We have the pea gravel concrete around our pool. Wondering what options there are for that surface.
Certainly makes that old worn pool apron look new again, nice job Mike.
Yo Miike, any thoughts on the H&C Acryla Deck "Cool Feel"?
I had Mortex Kool Deck invented in 1962 can't get anything cooler to walk on bear foot., I'm in AZ where it's hotter then hell in the summer. I had been talked into acrylic lace that stuff was like walking on hot coals in the summer. After about 10 years it peeled up in sheets that Acrylic lace.
What did you end up going with??? I’m in AZ as well
@@Guvnor1923 Haven't called them yet I think the price will be high to remove the old stuff well see. Probably getting too hot to install it even if they say it can be done I'm not so sure rather wait till the fall. Unless it's super expensive I'm going to have the Mortex Kool Deck put back in like it was prior to 2007.
Hi Mike,
Awesome info and videos, thank you. 🙏 I have one quick question, that concrete hand held grinder… can you tell me the make, model and what disc pad you utilized? Was it connected to a vacuum? Can you tell me which one that was?
Thanks again.👍
Great content as always. It looks like Sherwin Williams isn't going to have any of their elastomeric products for a year or 2. Not sure why, but they are really falling behind the curve with industrial coatings since last year. Cheers Mike & crew!
I used the Sherwin Williams one and STAY AWAY from it, it started peeling after 4 months, horrible!
Looks great. Any products to cut the heat of the summer sun that can be painted on?
Thank you so much for sharing! Looks fantastic!
Does the coating stay cool in the sun?
We use cool deck paints in Florida
Great video. I have an issue with my concrete around my in-ground pool it’s Stained with sherwin Williams H an C ColorTop. I power wash and clean the concrete every year before staining I’m trying to figure out why the concrete stain is peeling every year i get the same results.I contacted Sherwin Williams. Seen this video looking for some help. Thank you.
I use quartz crystal blends- s grade in polyphatic resin. Double broadcast. With a texture coat on top. So durable natural antiskid. Awesome for pool patios
Looks great. Looks like sand. Perfect.
Wow! Impressive results!
Great video! What grinder do you recommend to use to remove that top layer? Maybe where I can buy something similar to the handheld grinder that you used on this job. Thanks
Hi, what is the average cost for this service? I am in houston.
Nice videos. What is the quick drying grout product that you use ?
Quik Fix: www.deco-cretesupply.com/MikeDay/QuikFix
Weed sprayer 😮 I have to try that
Wow, looks amazing! What would you recommend to update flagstone..can anything be put on top, i can't afford to replace. Thanks
Great video. What product do you recommend for a garage floor that you do drive on
I have not found any paint or stain to hold up outside on concrete. With any amount of foot traffic they wear away.
Hi Mike. Just love your video and helped so much. Can you please tell me the color that you used in the above video when painting the pool deck?. Would like to use the same color myself. Thanks so much..
Love your channel, I'm learning so much. Im getting ready to paint/coat my pool deck and am considering grinding instead of pressure washing it like you did in this video. Is the grinder tool your using something that can be rented?
I pressure washed my patio good, and took it down to the concrete in most areas, but some previous paint will not come off. There is no flaking at all, but wonder if I can still paint right over what existing paint there is, or do I have to etch or prime the patio first? Advise needed badly :)
does help with keeping the concrete cooler during the summer?
How well does this product go over already painted decks? I need to repaint my deck as it has some areas that are beat up and chipped. Thanks.
My first thought was that color was to light and when it was done I’d say it looks great 👊🏼👊🏼🪚🔨✌🏼🇺🇸🇺🇸
Thanks 👍
Lighter the color the cooler the surface on bare feet
No. Any dirt, leaf, sand or anything that gets on it stands out shockingly bad. Have to clean it everyday. I wish I'd made some kind of pattern in coloring. Anything would've looked better.
I can’t find anywhere to buy it either in the US
My friend from grade schools Concrete Company went under, handed down from his Dad, been running since before '91 when I started hanging with him on BMX bikes, not sure what happened or why it closed. Kinda a bummer.
if I have previously filled narrow cracks with Vulkem116, do you know if this product will work over those cracks?
Always great info from u Mike, thanks 👍
My pleasure!!
what do you think about a thin coat of quickcrete to repair? need to work out a solution for my dads house. ill keep this paint in mind and being from NJ i should get it fast
@Mike Day Thank you for your service of sharing your expertise! Do you recommend this for garage floors? If not, then what do you recommend? Thanks in advance.
I just put on Foundation Armor SX5000 sealant on my new concrete decking. Looking to color the concrete. Would this product bond properly over my sealant? If not, is there another product you recommend?
Hello I’m interested Tom Sarem how to paint my concrete under my deck that someone destroyed the design with the grinder with her was pressure washing it supposedly
Beautiful job 👏 👌 🙌
How do you handle stamped concrete which has been previously painted?
Awesome job!
I have 2000 square feet of concrete that was coated with resurfacer 15 years ago. Half of it has popped up. It was colored with bright white. Could this work if I ground the concrete smooth?
Extremely helpful video,do you have to keep a wet edge,would you experience a difference if you roll the edges and roll a few minutes later?
Do you charge by the square footage? I would like to start doing this because it looks profitable
Nice work
Hi Mike, my pool has what I've been told is something called cool pad? You have to stipple it and then trowl down the stippling. In my opinion, it was a botched job, because they didn't trowel the stipling well, so you can't walk barefooted on it in a lot of places and there are several places where it's coming up off the concrete. My question is how would you redo this?
I called my local Sherwin Williams and Lowe’s and neither of them carry them. Is there another location to try or a similar product from a different brand? Thanks
I do Lots of that stuff up in New England I work for triad they should’ve done spray deck would have came out nicer
Looks great!
Great job Mike, thanks. It appears I could use this product on my concrete pool coping. Do you see an issue with that? Thanks for advising.
Really nice work. Thank you.
Looks great
What color deck seal is the coolest temperature?
Where did you buy, please, MAPECOAT DECK T in USA ? Thanks so much.
I can’t find anywhere to buy it either in the US. Did u
what head did you use on the floor buffer to smooth the concrete?
Ever put a sealer on after? We did and had fantastic results
Have you ever done a chemical etch before painting? Like an acid?
Which paint would you recommend can be driven over if any?
Looks pretty good, what was the name of the color? or any Id#? Thanks
Do you need to add a slip proof grit to the paint.. I’m getting ready to do a paint job on our pool area
How long does this product last, and will you ever end to strip this product off. Is the Quickrete epoxy concrete repair product good for cracks?
Can you use this on kitchen concrete?
Hey mike what do you use to repair exposed agg concrete?
Can you layer it or use colors in a pattern formation?
Does this work in a garage? My garage had cracks in year 1. It’s year 2 now and I want it to last decades.
What are you using for the quick patches? What material
God I wish you guys were local cause I had a concrete surface poured last fall in back of my home and the people who did it had no freaking clue what they were doing. Long story short, I need need to have the whole surface refinished and sealed cause it looks absolutely horrid.
1. Will it work on my pebbled pool deck ? 2. Can i use it in my garage ?
Could you paint like this over paver around the pool?
Could it work on pavers too?
👍thanks for the video
You bet
Is there any reason(s) why you stopped using the Sherwin-Williams line of concrete paint used a few back?
My pool is 16 years old and I used white cement and it lasted 12 years and looks great I had it redone and hopefully it will last another 12 years
I love painted concrete,what a refresh
will this go over exposed aggregate pea gravel?
What is the tool you are using to remove the old paint?
I have a few questions for you. How does this Mapecoat coating work on a concrete carport? Does it do ok with car tires on it? Any suggestions for that type of application? I have just a porch and patio paint on there now and it is flaking very bad especially after all the rains we got this last winter. Thanks!
I wouldn't use it to drive on
@@MikeDayConcrete Thanks for your response. What would you use instead?🚙
Great video. Thank you.
Niceeee. Btw what color paint is this
How long actually the paint can last like in NJ weather? Without chip out ?
What's the name for feeling in the cracks
How long would something like this last in a dry hot climate?
What is name of crack filler? Thank you
Hey Mike, love your channel..have you ever done a pool deck epoxy overlay? Just curious.
Not yet!
Wht was the cost and material plus final bill? Just was curious
What is the name of the yellowish material poured and use to cover the chipped area?
The link is in the description.
Do you put anything on it? Or is that apply straight?
Sherwin williams moved to selling Loxon-XP instead of the Conflex. Works pretty good.
What color is the top coat?
Mike, do you now prefer this product for pool decks over the Stone Edge product? Please advise. Thanks in advance.
did he reply
He did not
Is this like cool deck?
U have a coarse on patching a day painting pool deck and sidewalks and drivew a ys
Great job as usual!
Thanks again!
How would you clean this a year later ?? Could you lightly power wash it ?
Wash it like washing a car.
How gallons did u end up using
What color is this pool deck paint
Putting more energy into the application process, like lifting your roller on the fwd stroke each time in the last rolling as you go, so as to mot leave roller marks, in the end.
Jus sayin.
Hi Mike, How many years would the paint last? I have over 1000 sq feet concrete backyard uncovered. Its almost 40+ years old and looks old and tired. I am planning to paint it using porch and floor paint from Sherwin williams, what is are your thoughts? Is it worth the investment? will it last? I am in CA.
I wouldn't use that product. Look at REVIVE from Deco-cretesupply.com. It will last much longer.
@@MikeDayConcrete thanks. I am planning to with a dark color. Do you suggest otherwise?