Awesome shooting! Looks like a really laid back range. I just got the same rifle in a 338 Lapua and looking forward to shooting it in the next couple of weeks. You motivated me. Thank you for the video.
Just got a bergara HMR wilderness in the 300 prc. That thing is a true tack driver, absolutely love it. Threw a area 419 sidewinder on it, very minimal recoil for a 300
X-Ring, by the way, definitely don’t feel bad about that first shot. Got home and the rail had loosened up on it. Locktite and all... I’m going to red LT apparently.
Good video as always. Have you tried the Mossberg MVP? Interested in getting that in .308 what is your opinion about that rifle especially compared to the Tikka Tac A1?
I'm ready for for Fall to be back so we can have more Flannel Channel lol. I was out at the Clinton House yesterday but missed you guys out there. Maybe next time!
Also it could just be a poorly calibrated shoulder on my end, but the 300RPC seemed to have less recoil than your typical 300WM. I went 6.5PRC myself, but looked strongly at the 300. Can't go wrong with either.
Can’t remember on the 300 PRC. However, you will typically be in the 23-26 mils up from 100 yard zero based on conditions, bullet speed , Air density etc. for 6.5 Creedmoor. 👍🏼
@@XRING I believe the 300 prc is typically around 60 MOA up from zero to 1 mile based on most videos I've seen,, it surprisingly has a slightly flatter trajectory than the 338 Lapua
Xring have you ever shot any bergara rifles? Specifically the hmr in 6.5? I have a brand new rifle sitting here since i bought it back in January and have yet to shoot it due to the boogaloo and all the ranges shutting down out here in ohio.
Im torn between 300prc and 28 nosler. I have been told nosler is more of a hunting round, but it is screaming fast, so im sure it could be pushed pretty far.
With regards to barrel length is the length determined by the total distance of the rifled section of the barrel or chamber plus rifled section of the barrel, the reason behind my question is I recently had a proof research barrel fitted too a rifle I look for 24 inch barrel and I've measured it and can't seam to get 24 inches so it's either cut short or the inches on my tape have gotten bigger
Knocked my 2nd gen viper pst upper n all through the porch banisters nailed the ocular hard enough to bust scope cap on wood then flopped 4’ to the ground….re zeroed and never knew I dropped it….spent the $$$ on there hd4000rf and hit 2440yrds offhand
Hi Mr. Ray. Been watching your channel for a while now and was wondering if the 1 mile rifle range that you be shooting on is privately owned or a public range. I stay in the south eastern part of North Carolina and we don't have any public range with over 500 yards within 100 miles of me.
Ok thanks for the information. I enjoy watching your channel. Where exactly is your store located. Would like to stop by and see what different kinds of ammo you have.
Gavintoob has been doing a lot with 300PRC. I've considered putting one together. I need more info from multiple "trusted" sources to sell me. I do think it has potential. Does the speed make up for the cross sectional area though? Lot of surface area for wind and drag.
I own a Ruger Precision Rifle in 300 PRC nice rifle but the problem is not being able to find ammo for it. Hornady who developed and marketed thing is a joke. I feel like I bought a rifle that takes either boutique or wildcat ammunition. I live in Pennsylvania and can't find the stuff anywhere here on the east coast. The few times I've been able to buy any it was from people out west 1500 miles away. My advice is really think long and hard about purchasing a rifle in 300 PRC. I wish I would have baught it in 300 Win Mag or 338 Lapua. Only reason I didn't go with the 338 was cost of ammo for it. Instead I bought the hype from Hornady and went with their 300 PRC they obviously don't want to make ammo for... Again think long and hard about the 300 PRC when a 300 Win Mag or 338 Lapua will get it done for long range shooting...
@@XRING Is 6.5 PRC another creation of Hornady? Don't get me wrong I like Hornady ammunition I believe they manufacturer some good ammo, I've always had great results with it in other calibers. But to market something and then not manufacture is a real disappointment. Thanks for your reply glad I'm not the only one who's experienced this with Hornady ammunition...
@@gsnicholas8522 Hey Nicholas with all do respect not sure where you live in Pa. But trust me where I purchased the rifle at Cabela's, which isn't far from my home, they never stock 300 PRC like ever. I should have known when I bought the rifle over two years ago, and they didn't have the ammo it was a mistake. The only place I've found it at a reasonable price has been in the mid west states if they can get it. Note called Hornady to find those locations, they hyped the 300 PRC and never delivered on it. That's the sad fact with Hornady lesson learned with that company and their BS...
@@VIKING-SON I'm in the central/north central part of the state close to Lock Haven. My LGS is tiny, but he has ammo and powder. Maybe I should feel fortunate?
Ray, I'm looking for a hunting and getting back into long range shooting because this 300prc is very interesting. I never heard much, good/bad about this brand and model but the price is right: Bergara HMR .300 PRC MATTE/MOLDED MINI-CHASSIS. This Christianson is 500 more. I have a CZ 455 with a updated stock and liked your latest video of the replacement, I think it is 457. I used to shoot 7.62mm 800m on the Army's National team in the 80s.
@@WheeledandWellArmed I think the mesa is poor. The one with the carbon fiber barrel is better. I have shot it and it is very nice. Ibhave had several comments about the mesa being poor
@@WheeledandWellArmed I have two begera and they are both shooters,but not in 300 PRC. BUT, I have had many people tell me to chunk the CA and get the Begara. Several have told me it is the real deal.
That is correct. However, I am still working on a video from that day where I took my 6mm Creedmoor with no dope and hit it like 3 out of 5 shots. Also hit it with a 77gr 5.56mm. Hopefully, I’ll get that video out this week. The mile target was 24”x48”.
Just another overbore powder wasting cartridge like the Weatherby and the RUM etc etc. Not trying to burst your bubble boys have fun. Try the old .308 Norma mag.🇨🇦🤠
Dang! One mile hit on 2nd shot! Good shooting X-RING. That's a hell of a rifle for that price.
Awesome shooting! Looks like a really laid back range. I just got the same rifle in a 338 Lapua and looking forward to shooting it in the next couple of weeks. You motivated me. Thank you for the video.
Just got a bergara HMR wilderness in the 300 prc. That thing is a true tack driver, absolutely love it. Threw a area 419 sidewinder on it, very minimal recoil for a 300
That sounds like an awesome setup! Area 419 makes some great stuff.
@@XRING That they do
What kind of ammo and accuracy do you see with this bergara setup?
@@paytonwoodruff3621 Just using the hornady factory ammo, probably half MOA consistently
3:35 is by far the best part of the review.
Nice shooting Ray! I really like the Christensen Arms rifles
Great shot! The rifle looks awesome.
That was awesome to hit on the 2nd shot as nice job....Sweet rifle....Good stuff....
2nd shot and hit the target at a mile. Way to go Ray. 👍
Dude, awesome shooting.
300 prc vs. 300 norma mag?
Ok.... sold, next cartridge is a 300 PRC haha. Thanks Ray!
LOL! Thanks for watching Ken. I still have to review that item here soon. Couldn’t go down range with it yesterday.
That is One Bad Ass Rifle from , Christensen Arms !!!!!!!!!!!!!
Great review I own same scooe and mount works great
Very nice. Great rifle.
love that range!
"son of a bitch" lol...i know the feeling man
X-Ring, by the way, definitely don’t feel bad about that first shot. Got home and the rail had loosened up on it. Locktite and all... I’m going to red LT apparently.
Good to know Joe! Thanks again and have a great weekend!
Good video as always. Have you tried the Mossberg MVP? Interested in getting that in .308 what is your opinion about that rifle especially compared to the Tikka Tac A1?
I'm ready for for Fall to be back so we can have more Flannel Channel lol. I was out at the Clinton House yesterday but missed you guys out there. Maybe next time!
Also it could just be a poorly calibrated shoulder on my end, but the 300RPC seemed to have less recoil than your typical 300WM. I went 6.5PRC myself, but looked strongly at the 300. Can't go wrong with either.
Nice shooting
How many Mils or MOAs of vertical adjustment were you on with that 212 grain factory ammo to hit 1 mile?
Can’t remember on the 300 PRC. However, you will typically be in the 23-26 mils up from 100 yard zero based on conditions, bullet speed , Air density etc. for 6.5 Creedmoor. 👍🏼
@@XRING thanks
@@XRING I believe the 300 prc is typically around 60 MOA up from zero to 1 mile based on most videos I've seen,, it surprisingly has a slightly flatter trajectory than the 338 Lapua
I love the stock
Very minimalist but nice.
You didn’t notice the shiny washers for spacers😁?
Xring have you ever shot any bergara rifles? Specifically the hmr in 6.5? I have a brand new rifle sitting here since i bought it back in January and have yet to shoot it due to the boogaloo and all the ranges shutting down out here in ohio.
I’ve been looking to get a bergara. Let me know what you think of it! It’s either bergara or a savage 110 for me
Wow 😮 awesome shooting Xring . That’s a very nice rifle for the price . Are these barrels button or cut rifled?
You liken it to a 30-06, but like shooting a 150 or 180 or like 200 grain bullet? 150 feels alot less than even say a 180.
Out of the Christensen MPR and the Mesa Long Range which do you like best?
Might be my next cartridge 😜
Im torn between 300prc and 28 nosler. I have been told nosler is more of a hunting round, but it is screaming fast, so im sure it could be pushed pretty far.
With regards to barrel length is the length determined by the total distance of the rifled section of the barrel or chamber plus rifled section of the barrel, the reason behind my question is I recently had a proof research barrel fitted too a rifle I look for 24 inch barrel and I've measured it and can't seam to get 24 inches so it's either cut short or the inches on my tape have gotten bigger
Barrel length includes the chamber. Typically measured from the front of the bolt face. I
Knocked my 2nd gen viper pst upper n all through the porch banisters nailed the ocular hard enough to bust scope cap on wood then flopped 4’ to the ground….re zeroed and never knew I dropped it….spent the $$$ on there hd4000rf and hit 2440yrds offhand
The break works really well but its freakin loud.
Hi Mr. Ray. Been watching your channel for a while now and was wondering if the 1 mile rifle range that you be shooting on is privately owned or a public range. I stay in the south eastern part of North Carolina and we don't have any public range with over 500 yards within 100 miles of me.
Hey Johnny, the mile range is open to the pubic once a month. Check out the schedule at Clinton House Plantation, in Clinton, SC
Ok thanks for the information. I enjoy watching your channel. Where exactly is your store located. Would like to stop by and see what different kinds of ammo you have.
Feeding issues probably due to the massive 3.600 OAL
Gavintoob has been doing a lot with 300PRC. I've considered putting one together. I need more info from multiple "trusted" sources to sell me. I do think it has potential. Does the speed make up for the cross sectional area though? Lot of surface area for wind and drag.
Whenever you start getting up in the heavy 30 cal bullets (220gr-230gr) the BC starts to get well up in the 0.700 g1 bc range
I own a Ruger Precision Rifle in 300 PRC nice rifle but the problem is not being able to find ammo for it. Hornady who developed and marketed thing is a joke.
I feel like I bought a rifle that takes either boutique or wildcat ammunition. I live in Pennsylvania and can't find the stuff anywhere here on the east coast. The few times I've been able to buy any it was from people out west 1500 miles away. My advice is really think long and hard about purchasing a rifle in 300 PRC. I wish I would have baught it in 300 Win Mag or 338 Lapua. Only reason I didn't go with the 338 was cost of ammo for it.
Instead I bought the hype from Hornady and went with their 300 PRC they obviously don't want to make ammo for...
Again think long and hard about the 300 PRC when a 300 Win Mag or 338 Lapua will get it done for long range shooting...
I think that also applies to 6.5 PRC. You cannot find it anywhere.
@@XRING Is 6.5 PRC another creation of Hornady? Don't get me wrong I like Hornady ammunition I believe they manufacturer some good ammo, I've always had great results with it in other calibers.
But to market something and then not manufacture is a real disappointment. Thanks for your reply glad I'm not the only one who's experienced this with Hornady ammunition...
That’s odd. I’m in Pennsylvania too, but my LGS has had 300 prc and 6.5 prc ammo in stock for the past year at least.
@@gsnicholas8522 Hey Nicholas with all do respect not sure where you live in Pa. But trust me where I purchased the rifle at Cabela's, which isn't far from my home, they never stock 300 PRC like ever. I should have known when I bought the rifle over two years ago, and they didn't have the ammo it was a mistake. The only place I've found it at a reasonable price has been in the mid west states if they can get it.
Note called Hornady to find those locations, they hyped the 300 PRC and never delivered on it. That's the sad fact with Hornady lesson learned with that company and their BS...
@@VIKING-SON I'm in the central/north central part of the state close to Lock Haven. My LGS is tiny, but he has ammo and powder. Maybe I should feel fortunate?
Ray, I'm looking for a hunting and getting back into long range shooting because this 300prc is very interesting.
I never heard much, good/bad about this brand and model but the price is right:
Bergara HMR .300 PRC MATTE/MOLDED MINI-CHASSIS. This Christianson is 500 more.
I have a CZ 455 with a updated stock and liked your latest video of the replacement, I think it is 457. I used to shoot 7.62mm 800m on the Army's National team in the 80s.
I have sent my CA 300 PRC back to he fa they twice now. It will not shoot sub MOA. IF IT GETS WARM US IS ALL IVER THE PLACE
@@SGT1911 thanks, you sound experienced, is the gun overall poorly designed or just the barrel not right or maybe just a one off bad luck?
@@WheeledandWellArmed I think the mesa is poor. The one with the carbon fiber barrel is better. I have shot it and it is very nice. Ibhave had several comments about the mesa being poor
@@SGT1911 Any thoughts on the Bergera I mentioned above. I think this is now USA made now.
@@WheeledandWellArmed I have two begera and they are both shooters,but not in 300 PRC. BUT, I have had many people tell me to chunk the CA and get the Begara. Several have told me it is the real deal.
What the name of the range. Need a mile range for mine.
How big is the plate you're shooting at?
The 1 mile the target is 24” wide and 48” tall.
@@XRING Is this the place doing those 1 mile shots with psa 6.5 ar10 with their scope with that old Jarhead?
Yes.
You hit on YOUR 2nd shot, but he had fired this rifle before the same day and the dope was already entered, correct?
That is correct. However, I am still working on a video from that day where I took my 6mm Creedmoor with no dope and hit it like 3 out of 5 shots. Also hit it with a 77gr 5.56mm. Hopefully, I’ll get that video out this week. The mile target was 24”x48”.
What happened to the Proof 6.5 PRC?
LOL! It is resting in storage. Haven’t had time to get it out to the range.
You should test a rifle chambered in 6,5x55 Swede for long range, Way better than 6,5 cm.
Nice! That’s huge, a little bigger than mine 😜🔫🤪🔫🤣. I want that!
You should take that 6mm and 6.5 out to that range
I did. The 6mm killed the 1 mile. Still working on the footage. I used to shoot there all the time. It’s a haul down there.
Can you show us a target you shoot
What was the hold for the mile shot?
Bryan DuChane 60 MOA
Sir do u own sniper shop?? Lol
Second great video
meesa long range -jar jar binks
Where is this, Clinton House?
Yes sir, 1mile shoot once a month for $75
I’m in G’ville. Belong to the local club, but considering joining there.
I will pass on this one.
First
Just another overbore powder wasting cartridge like the Weatherby and the RUM etc etc.
Not trying to burst your bubble boys have fun.
Try the old .308 Norma mag.🇨🇦🤠
You should do some research before commenting. It’s on par with a 300 win mag. You know what else is similar to a 300 win mag? A 308 Norma.