Whenever a set like this leaves the shop it is a weird emotion of wanting to keep them, but also being extremely happy someone else is going to get to enjoy them! Thanks for the support!
@@LoggerheadGolf by the way Miles your production efforts don't go unnoticed either, the various camera angles, zooms and changing focus for depth shots is great stuff!! Also the music throughout the entire video is cool, noticable but not shooting by any stretch... There is no RUclips channel without your time and effort!!! Appreciate you!!
Brother you truly a craftsman and your attention to every detail shows your incredible skills. Enjoyed watching every minute of this build. Keep them coming and God Bless
This is awesome to watch!! If someone were to send you all the components to make an iron set, could you assemble them? I don't know of anyone local who takes this much pride in making clubs. I'd love to have my set built by you guys!
100% You can definitely send in club components and we would be happy to assemble them for you. Send us an email and we will get you taken care of! media@loggerheadgolf.com
Yep you got it! We put however many wraps the client wants, rolled up in the grip so that way our swing weight isn't off in the end. Every gram counts!
@@LoggerheadGolf Had I know what I know now! I was lucky my Boss was close with Mr. Stites. My set was pretty interesting I did a split set. 7- PW was ground like an MP 9 and 2-6 I believe was a Pro Cavity back his guys were amazing and did their magic and the set was beautiful and playable. The only knock I had was the grooves would wear. This was all pre Nike and many of the concepts Mr. Stites and his staff were in development years before Nike. I was pretty lucky my Boss was friends with him. Plus the range I practiced at would become the hub for Nike Golf in Fort Worth. Looking at your work you would have fit right in with Tom and his staff they were next level geniuses.
Just used those Lamkins on a wedge reshaft, guy brought in 2017 masters edition DG S400's, was a really fun build - The UTX cords compliment so many builds, so damn well. Awesome work as always 👊
learn a lot from this video.. especially on the steps need t be performed. thanks loggerhead golf. may i know what type of saw disc you use to cut graphite shaft? can it be used to cut steel shaft as well?
It’s a Gryphon ultra fine fiberglass reinforced abrasive blade (mouth full) but yes! You can use this blade for graphite/composite shafts as well as steel shafts!
Not always! It depends if a tip weight will fit in the composite shaft. With the Axioms it didn’t, so our option was tungsten powder in the epoxy. This all comes down to what swing weight you are trying to achieve. 2 grams is about 1 swing weight. Hope that helps!
Amazing - love the work. I was fitted into this combo this summer. Have not pulled the trigger yet. One of the reasons is that my builder really wants to spine the shafts. I think it messes with the whole idea of having something truly beautiful in your bag though.. What difference does it really make? I play Baldo 568MC Competizione with 10th anniversary Modus 115 today. I need more lift and a smoother turf interaction though.
Thanks! We had a podcast with Fujikura a while back that is on our channel and they said that the new Axiom shafts don't have a spine. We still check but it lets you keep the beauty of the clubs if that is what you're worried about.
@@LoggerheadGolf right now I'm playing Cobra S9-1M driver, Cobra Baffler XL hybrid, Cobra t rails, Cleveland CBX2 wedges. Many years ago I played a Thomas at705 hybrid set 2-gw for a many years. Decided to reorder a new set half the set looks great the other half looks totally opposite as someone slapped them together not knowing what they were doing.
@@jayhales3822 Sadly that's the case sometimes. Give us a call at the shop or shoot us an email if you ever have any questions. You can also send clubs in and we can rebuild them to your desired spec! media@loggerheadgolf.com
All we are doing with the drill is roughing up the inside of the hosel. Allows the epoxy to have a better grip so the shaft won’t slip or slide out over time. The weight lost is next to nothing, but every club is swing weighted to the desired swing weight in the end.
@@LoggerheadGolf , Understood. So the same goes for the ferrule when that gets shaved down, too, correct ? Awesome work, by the way. Onward & Upward ☝️💯
@@misterc6012 We do check final swing weight once the build is complete. The weight lost when turning the ferrules is next to nothing so it doesn't have a major effect on swing weight. Sometimes the ferrules match the hosel almost perfect, so we are just turning them with a bit of acetone to clean them up. And we use a felt belt to minimize the amount of material that comes off.
I had a set of their Baby Blades , but went back to my custom fit Kenneth Smith Stainless Steel blades , they had better feel . AND I still have them from my 1993 fitting , sold the baby blades many years ago.
Hello, can you sell me some irons from 6 to pw and send them to me, I live in Texas I would like a shaft of about 80 g maximum and the irons km 700. Thank you
Every bit of weight added to the handle, past the fulcrum point will affect the swing weight. Depends on the weight of your tape, but general rule of thumb is every 5 grams of weight added to the handle is about 1 swing weight.
Way to much BS building those clubs, Great for show absolution does nothing for performance. Watch the tour trailers build a club, shaft out of 5 dozen in the draw, head out of the draw set SW rock on. NO CPM, NO FLO'ing zero BS. Nice work but useless. OBTW been building for 20 years
Curious which step/steps you think aren’t important? Besides CPM’ing, which we do to make sure we have a nice stepping in the irons. It also is a nice way to double check that the shaft wasn’t damaged in shipping.
All shafts that are made for the tour already have been sorted by cpm and raw weight before they make it to the vans . ( also another fun fact most grips golf pride sends to players are also all sorted by the exact weight of the grip ) And every van does flow and check swing weight . OBTW Former tour van tech 7 year employee
@@LoggerheadGolfinteresting his criticism is that you went further than required to build the set. Not that you missed a step. Also maybe I’m reading the comment in an unintended way but this guy sounds fun to be around 😂
Sorry diese Arbeit ist nicht gut, die Bearbeitung der Schäfte ist dilettantisch, kein Frequent Bau keine richten des Schaftes. Über die verwendeten harten Ferulles kann man auch streiten.
@@LoggerheadGolf Sorry das sind nicht meine Ansprüche sondern Sie sollten wenn Sie es öffentlich zeigen richtig bauen, Sie suggerieren eine Arbeit als toll die so nicht richtig ist. Schäfte einfach nach Tabelle schneiden sollte man den Fabrik Herstellern überlassen. Miura Köpfe haben eine besser abgestimmtes Arbeit verdient.
@@LoggerheadGolf sorry wollen Sie mich für dumm verkaufen, gerade bei diesen Schäften ist ihre Vorgehensweise besonders falsch. Noch dazu Graphit. Kommen Sie vorbei ich zeige ihnen wie man exakt einen Eisensatz baut, das danach alles stimmt.
Yes, no doubt a skilled craftsman at work. However, as a man who hates hybrids and even 5 woods, uhm....I'm not paying £4000 for six irons. I play Driver then 2 iron to gap wedge sw and lob. Guy whose paid for these us gonna stick them in his bag with all sorts of weird hybrids combinations and then wants to show em off to his club pals and bet envy points. Prob wont even get iron covers for them and they'll get bag chattered to fuck. Uhmm.....no thanks....only ultra rich iron collectors need apply. Golf is about putting a set together to enable you to get ball in hole with fewest strokes. Get custom fit..yeah...but this...just ridiculous
Nothing wrong with a little bag chatter. These irons are meant to be played. Definitely more on the expensive side, but they also fall into a collectors category for someone who appreciates the highest quality of forged irons. We can't control what people order, or what they do with their clubs after they receive them, but we can control the effort and quality we put into building them.
It's truly amazing. The attention to detail, methodical, efficient...you sir are a craftsman!
Appreciate it! 👊🏼⚡️
Beautiful job
Appreciate it!
Fantastic work.
So clean! Could watch this all day! Just started my own in the garage.
Aye thanks! Good luck with your build!
So satisfying to watch, makes me want to put a little build shop in my garage to play in
Ain’t no one stopping you! Do it 🤘🏼There’s always something you can’t tweak!
I like it... That's how i like to build my clubs, too. I do everything but the frequency but only since i don't have a freq meter. Quality build.
Thanks! Appreciate it! 👊🏼 It’s definitely not 100% necessary but also a good little improvement if you can get yourself one 👍🏼
Artist at work… brilliant job bro!!!!
Thank you! Cheers!
Beautiful set of irons. Outstanding attention to detail and meticulous craftsmanship. Well done!
Thanks! It’s all about the little things!
What a awesome set of irons. Perfect job well done.
Whenever a set like this leaves the shop it is a weird emotion of wanting to keep them, but also being extremely happy someone else is going to get to enjoy them! Thanks for the support!
@DJ - It is so cool to watch you in your element - and it really is YOUR element!! So talented!!!!!
Always appreciate the support Tom! Your Miura's are next!
@@LoggerheadGolf by the way Miles your production efforts don't go unnoticed either, the various camera angles, zooms and changing focus for depth shots is great stuff!! Also the music throughout the entire video is cool, noticable but not shooting by any stretch... There is no RUclips channel without your time and effort!!! Appreciate you!!
Brother you truly a craftsman and your attention to every detail shows your incredible skills. Enjoyed watching every minute of this build. Keep them coming and God Bless
Appreciate the kind words! Was a fun set to build
Very good work my dude ~ gets the nerd juices flowing !
Right?! Haha it’s a fun process
This is awesome to watch!! If someone were to send you all the components to make an iron set, could you assemble them? I don't know of anyone local who takes this much pride in making clubs. I'd love to have my set built by you guys!
100% You can definitely send in club components and we would be happy to assemble them for you. Send us an email and we will get you taken care of! media@loggerheadgolf.com
@LoggerheadGolf Just spoke with you guys on Monday! Can't wait to send my clubs in!
@@haydenbriggs Let's go!
Ok im sending my next set to you to build my friend! that was mesmerizing
Would be happy to build them for you! 👊🏼⚡️
Craftsmanship and attention to detail. I know where to go in Wilmington for my next set now.
Would be happy to build you a set ⚡️
@@LoggerheadGolf When recovered from hip replacement, I’ll be there.
@@MrLabanimal Sounds like a plan! Speedy recovery!
Simply incredible attention to detail. Beautiful irons 👌
Cheers! ⚡️
This music reminds me of metroid prime. Sweet irons.
Good call 🤘🏼and appreciate it!
Phendrana drifts son!
A master at work, have to keep you in mind on my next set
Please do! We would be happy to build them 🤘🏼⚡️
this is my dream set! i’m playing miura mb5005 and km701 wedges. saving up😊
we know a place that can build them for you
Piece of Art…well done 👍🏻
👊🏼⚡️
Absolutely beautiful irons!!
🙌🏼 hard to beat’em
Those lamkins looking extra cordy
What are you putting in the grip on swingweight machine @6:16? Rolled up grip tape?
Yep you got it! We put however many wraps the client wants, rolled up in the grip so that way our swing weight isn't off in the end. Every gram counts!
best kombination out there. playing the same
awesome set of irons!
I wished I had my prototypes of these from the 90’s when Tom Stites had his shop
That would be an interesting mashup
@@LoggerheadGolf Had I know what I know now! I was lucky my Boss was close with Mr. Stites. My set was pretty interesting I did a split set. 7- PW was ground like an MP 9 and 2-6 I believe was a Pro Cavity back his guys were amazing and did their magic and the set was beautiful and playable. The only knock I had was the grooves would wear.
This was all pre Nike and many of the concepts Mr. Stites and his staff were in development years before Nike. I was pretty lucky my Boss was friends with him. Plus the range I practiced at would become the hub for Nike Golf in Fort Worth.
Looking at your work you would have fit right in with Tom and his staff they were next level geniuses.
@@taragrantham1338 That's a cool story! Thanks for the kind words!
Ive been following for a while on Insta but just found this on RUclips. This video is phenominal. Its nice to see folks checking CPM!
Aye! Thanks! On most of these new composite shafts the build quality is so good from the manufacturers, but it's always a good idea to double check!
Just used those Lamkins on a wedge reshaft, guy brought in 2017 masters edition DG S400's, was a really fun build - The UTX cords compliment so many builds, so damn well. Awesome work as always 👊
Sometimes it feels like people forget about lamkin, they always look and feel great on a club!
That’s art 🖼️
Appreciate that!
I just want to hit those irons now omg
ha you’re not alone 😂
I have a PI 401 set love em
pretty set 🤘🏼
learn a lot from this video.. especially on the steps need t be performed. thanks loggerhead golf.
may i know what type of saw disc you use to cut graphite shaft? can it be used to cut steel shaft as well?
It’s a Gryphon ultra fine fiberglass reinforced abrasive blade (mouth full) but yes! You can use this blade for graphite/composite shafts as well as steel shafts!
@@LoggerheadGolf thank you... Great work with the videos.
Beautiful
Cheers man! 👊🏼⚡️
Could watch this all day!
It's like morning coffee
@@LoggerheadGolf Coffee will stunt your growth! haha
Love it!
👊🏼⚡️
Sweet vid. What grit sand paper do you use to work down the ferrules so that you don't scratch up the hosel?
Thanks! We use a felt belt for all of our ferrules.
Amazing work, Quick question. Are you always using tungsten powder in your epoxy and how much does it affect the Swing weight? 😁⛳️
Not always! It depends if a tip weight will fit in the composite shaft. With the Axioms it didn’t, so our option was tungsten powder in the epoxy. This all comes down to what swing weight you are trying to achieve. 2 grams is about 1 swing weight. Hope that helps!
Amazing - love the work. I was fitted into this combo this summer. Have not pulled the trigger yet. One of the reasons is that my builder really wants to spine the shafts. I think it messes with the whole idea of having something truly beautiful in your bag though.. What difference does it really make? I play Baldo 568MC Competizione with 10th anniversary Modus 115 today. I need more lift and a smoother turf interaction though.
Thanks! We had a podcast with Fujikura a while back that is on our channel and they said that the new Axiom shafts don't have a spine. We still check but it lets you keep the beauty of the clubs if that is what you're worried about.
Super, thanks!
Is it possible to soft step the Axiom 2 times? Might have to send my clubs and shafts in
technically yes, as long as your set starts with a 4 iron. Send us an email if you have more questions! proshop@loggerheadgolf.com
Sure wished you would have built my hybrid set.
haha what setup are you currently running?
@@LoggerheadGolf right now I'm playing Cobra S9-1M driver, Cobra Baffler XL hybrid, Cobra t rails, Cleveland CBX2 wedges. Many years ago I played a Thomas at705 hybrid set 2-gw for a many years. Decided to reorder a new set half the set looks great the other half looks totally opposite as someone slapped them together not knowing what they were doing.
@@jayhales3822 Sadly that's the case sometimes. Give us a call at the shop or shoot us an email if you ever have any questions. You can also send clubs in and we can rebuild them to your desired spec! media@loggerheadgolf.com
Wish I could afford these irons..
haha you’re not alone 😂
The cost from.Miura is not that high.Its the insane mark.ups along the way.
How do you have time to run a club builder when you are out caddying for Max Homa?
LOL
What’s the best way to get in contact for a custom build?
Just send an email to media@loggerheadgolf.com
Does the Lamkin logo end up being in the same spot on every club?
Yep! DJ just doesn’t lay then all on the rack exactly the same
Do you apply ( + or - ) the weight that you lose when shaving the hosel into the overall weight of the club ?
All we are doing with the drill is roughing up the inside of the hosel. Allows the epoxy to have a better grip so the shaft won’t slip or slide out over time. The weight lost is next to nothing, but every club is swing weighted to the desired swing weight in the end.
@@LoggerheadGolf ,
Understood.
So the same goes for the ferrule when that gets shaved down, too, correct ?
Awesome work, by the way.
Onward & Upward ☝️💯
@@misterc6012 We do check final swing weight once the build is complete. The weight lost when turning the ferrules is next to nothing so it doesn't have a major effect on swing weight. Sometimes the ferrules match the hosel almost perfect, so we are just turning them with a bit of acetone to clean them up. And we use a felt belt to minimize the amount of material that comes off.
I had a set of their Baby Blades , but went back to my custom fit Kenneth Smith Stainless Steel blades , they had better feel . AND I still have them from my 1993 fitting , sold the baby blades many years ago.
Hello, can you sell me some irons from 6 to pw and send them to me, I live in Texas
I would like a shaft of about 80 g maximum and the irons km 700.
Thank you
Hi Juan!
Send us an email: proshop@loggerheadgolf.com
We can ship builds to Texas no problem!
@@LoggerheadGolf thanks !
does sanding graphite affect spec(flex, weight)?
Nope! 👍🏼
What orange grips are hanging on the wall?
Those are the Iomic Sticky 2.3 grips
How many wraps of tape b4 it starts to affect swing weight?
Every bit of weight added to the handle, past the fulcrum point will affect the swing weight. Depends on the weight of your tape, but general rule of thumb is every 5 grams of weight added to the handle is about 1 swing weight.
If only I had 3000 pounds lying around gathering dust I would buy a set of these.
HA welcome to the club!
What ruler is that?
Maltby benchtop ruler 🤘🏼
Put some damn safety glasses on ffs
good idea!
Gotta find better background music, I could only stand 3 min of it before muting the vid to watch the rest.
open to suggestions
Way to much BS building those clubs, Great for show absolution does nothing for performance. Watch the tour trailers build a club, shaft out of 5 dozen in the draw, head out of the draw set SW rock on. NO CPM, NO FLO'ing zero BS. Nice work but useless. OBTW been building for 20 years
Curious which step/steps you think aren’t important? Besides CPM’ing, which we do to make sure we have a nice stepping in the irons. It also is a nice way to double check that the shaft wasn’t damaged in shipping.
All shafts that are made for the tour already have been sorted by cpm and raw weight before they make it to the vans . ( also another fun fact most grips golf pride sends to players are also all sorted by the exact weight of the grip )
And every van does flow and check swing weight . OBTW Former tour van tech 7 year employee
@@LoggerheadGolfinteresting his criticism is that you went further than required to build the set. Not that you missed a step. Also maybe I’m reading the comment in an unintended way but this guy sounds fun to be around 😂
This coming from a 22 handicap. You know he’s been divorced at least twice. Worked his whole life and can’t even look forward to golf as a hobbie. Lol
Might be building clubs at a Dicks or something maybe lol tour trucks have already gone through everything they know what they have
Sorry diese Arbeit ist nicht gut, die Bearbeitung der Schäfte ist dilettantisch, kein Frequent Bau keine richten des Schaftes. Über die verwendeten harten Ferulles kann man auch streiten.
Danke für die Rückmeldung. Wir streben stets nach höchster handwerklicher Qualität. Es tut mir leid, dass es nicht Ihren Ansprüchen entspricht.
@@LoggerheadGolf Sorry das sind nicht meine Ansprüche sondern Sie sollten wenn Sie es öffentlich zeigen richtig bauen, Sie suggerieren eine Arbeit als toll die so nicht richtig ist. Schäfte einfach nach Tabelle schneiden sollte man den Fabrik Herstellern überlassen. Miura Köpfe haben eine besser abgestimmtes Arbeit verdient.
@@GolfFitService Haben Sie schon einmal mit einem 370er Schaft gearbeitet?
@@LoggerheadGolf sorry wollen Sie mich für dumm verkaufen, gerade bei diesen Schäften ist ihre Vorgehensweise besonders falsch. Noch dazu Graphit. Kommen Sie vorbei ich zeige ihnen wie man exakt einen Eisensatz baut, das danach alles stimmt.
@@GolfFitService 👍
Yes, no doubt a skilled craftsman at work. However, as a man who hates hybrids and even 5 woods, uhm....I'm not paying £4000 for six irons. I play Driver then 2 iron to gap wedge sw and lob. Guy whose paid for these us gonna stick them in his bag with all sorts of weird hybrids combinations and then wants to show em off to his club pals and bet envy points. Prob wont even get iron covers for them and they'll get bag chattered to fuck. Uhmm.....no thanks....only ultra rich iron collectors need apply. Golf is about putting a set together to enable you to get ball in hole with fewest strokes. Get custom fit..yeah...but this...just ridiculous
Nothing wrong with a little bag chatter. These irons are meant to be played. Definitely more on the expensive side, but they also fall into a collectors category for someone who appreciates the highest quality of forged irons. We can't control what people order, or what they do with their clubs after they receive them, but we can control the effort and quality we put into building them.