I've seen so many of these but YOUR design is the BEST I've seen and very well explained. LOVE IT! Finally found the one that I will try to replicate nearly exact. Only thing I'll do different, is make it 2 separate rolling workbenches that can bolt together when desired for the extra length, but otherwise can be separated so I'm not always stuck with an 8 ft table.
Interesting piece of work. I will definitely be using this idea. Something helpful you may or may not know or think about. Cover your top plywood for your table saw run and the bottom of the miter saw with formica fairly cheap at Lowe's or home depot. Get some turtle wax to put on the formica every once in a while to help your wood glide off your table saw with ease.
I made this bench this week, but added a router table to the opposite end. Thanks for the walk through and instructions. Now subscribed. Dom p.s. I tried to add images, but for some reason, I can't.
Thank you for sharing your build. I can definitely identify with your space issues. I have use of one side of a two car garage, so the ability to easily move equipment is vital for me. I enjoyed the way you included your thought processes while moving along with the build. Thanks again and keep building and filming!
this is what i will be making this fall when it cools down here in AZ... looks exactly like i was wanting. i just dont have a plainer to smooth things out..
I like it. Simple and functional. A lot of videos with stuff like this get overly complicated. And yeah, maybe it looks better but you just take more time and money to build it for no real functional benefit. I just got a miter saw and was looking for content like this. Looks good, I will reference your build when planning my own. Thanks.
Great job. I really like the order in which you added the bottom and saw platform. I’ve watched several of these builds and this was the smoothest I’ve seen.
I always like DIY’er video’s like this of which contain both a list of materials, an audio narrative by the builder (and possibly the exact dimensions), as well. - Why? - Because. - ONE - The builder thinks of others who may, or may not be trained and experienced enough to build their own but which both need a certain item for themselves and of which are possibly inspired and motivated to do so themselves as a DIY’er by watching video’s of what others have already built for themselves. - TWO - The builder explains “HOW”, he has done something during the building of that item, as well as “WHY”, he has done something a particular way during the building of that item. - THREE - The builder lists all the materials necessary for building that particular item. Yes. A standard “Run-of-the-Mill” DIY’er video containing nothing but the builder building something (which sometimes generally contains a speeded up sequence), which also only contains background music (of which generally consists of music that the builder enjoys, but many times others themselves do not enjoy listening to), with no audio narrative of “HOW” and “WHY” something is done in a particular way, or sequence, and for a particular specific reason, may inspire someone else to build that item because they need it for themselves. But in overall essence, it many times leaves the viewer and the potential builder of such an item in a predicament of “RED-FACED, SHAME” at the end of their own build because either during the building process, they overlooked something and/or left out a specific step, sequence, item, or even a necessary item (or items), from the needed and required materials list, and therefore have to keep returning to the store for further necessary and required materials to complete the build. Also Not to mention that at the end of the build their own item of which they so proudly built themselves either: - ONE - It does not stand up to long-term usage. - TWO - It does not look good overall. - Three - It leaves the inspired and motivated potential builder in "Red-Faced-Shame". And many times, - FOUR - It does not even come close to matching the original item except in a slightly off-hand general sort of way. Thank You for "A Job Well Done" - This is the way all of them should be done.
I agree with everybody else here, this table seems great and would really suit my new workshop (garage). I would love it if you would send me a copy of the plans for the build. Not sure if I need to send you a PM or not?
This is a pretty good guide. Some tips: 1) Make sure you really want a 40" bench top before you follow his plan. Standard countertop height is 36", so 40 is pretty high. I didn't check before I started and ended up taking it apart and lowering it. 2) This workbench is way overbuilt. You could really cut down on your material costs, build time and reduce work if you need to alter the design at some point in the future if you just simplify the build. You can safely eliminate four of his eight legs, though I haven't added the miter saw yet. Those four supports should need no more than one 2x4 each. Mine is pretty rigid and only has corner legs with doubled up 2x4s. Just overlap everything. He used 20, 2x4''s. I needed only 12. 3) The casters he uses are terrific.
Agreed. Check your height to make sure that’s where you want it. I call this out in my plans I’ve sent some people. That ends up being your preference. For the legs, agreed you can add single legs. The double up of 2x4s can be eliminated by just using 4x4s instead of single 2x4s. The double up is just for aesthetics. I don’t recommend eliminating 4 of the legs in the middle. If you do add the miter saw section, it will bow in the middle over time. It also depends on the miter saw you have. A heavier one will definitely make it bow. So for those reading this, don’t eliminate the legs in the middle if you add a miter saw. If you prefer to, that’s your choice but it will bow over time with all the movement in the middle.
I have watched quite a few of these builds and this one is by far the most practical, and looks amazing too, love the content mate, keep it coming! a follow from me 100% - keen to get started on this very build myself in a few weeks!
This is beautiful, and exactly what I'm looking to build! I emailed for the step-by-step and already received them; I can't wait to get started this weekend! I'm going to see if I can figure out how to mount my Kreg jig or some other low profile tool to the other side of the miter flip top. Then it could be covered with a temporary plate while in use as an outfeed. Thank you again!
You mentioned that you received your plans for the build. Can you tell me how you contacted Jay? I emailed him a few days ago to ask for the plans. I haven’t received a reply Really like to get started on this bench. Any help appreciated.
Very nice design. I would recommend putting some diagonal bracing on it though, to prevent the bench from racking/moving over time. That would greatly improve the longevity of the bench.
You can use 1-1/4" to 1-1/2" wood screws and washers to secure the miter saw to the tray. Just ensure they do not protrude through the other side of the plywood. (that's what he wrote in the video description)
Wow. Well done. Thought the framing was a bit elaborate for a workbench though. Still trying to figure out why? I’m the same way, though. I got myself bogged down sometimes on the job and I had a boss woh would come along and go, “we’re not building a piano here…”
That's a great table. I only have a small woodworking workshop (10'x13'), so my cutting table will need to go in my garage (which is also the laundry and storage). I need a table that is this neat and won't bother my partner. Will email you for the plans!
Excellent video that anyone should be able to understand! Best video series so far with very clear instructions! I appreciate and thank you for sharing your wonderful and professional experience with all of us and keep up the good work plus the nice videos you are providing! By the way, what's your location!
You can use 1-1/4" to 1-1/2" wood screws and washers to secure the miter saw to the tray. Just ensure they do not protrude through the other side of the plywood. (that's what he wrote in the video description)
This is great and all but you left out how you actually secured the saw to the table with no-show screws and how you avoided interference with the saw and the rear cross brace when the saw is flipped under.
This is awesome. I am currently renovating my garage, have my miter and table saws just awkwardly sitting on the ground. This would be perfect but as simply as you laid it out I am pretty brand new to woodworking and it still feels like too much for me to take on especially considering that I would need to reduce the length to 5.5 or 6'. Just a little too complicated for me! Plus I don't have a jigsaw or planer @ the moment : \ Really great vid, though.
I like the design, but you lost me on the post, which I thought was really really interesting. I need a workbench like this because I’m also working off of a picnic table lol
How did you figure out where to drill the hole for the bolt to get the flip top to flush with the table and still get the 3.5" depth for the miter saw to be flush with the table when in use? Can you provide that depth and center location to drill the hole for the bolt? Thanks.
Nice design and I am building it now with some mods. Question on the table top, why not just set it on and clamp it, trace the underneath side, then remove and cut out the pieces? This would save a lot of time trying to make sure you have an accurate measurements.
Awesome build J. I am searching for a build to do a mobile work bench and i like yours. It's simple for the average DIYer to complete, and after watching your video a couple of times I want to tackle this project this coming spring. How do I get a copy of the build plans and my miter and table saws are different so what are the critical measurements I should be aware of for proper installation. Again, great video looking forward to doing this. Terry....
@@jbuildsdiy 5:03 J, what a great job on this table. I’ve been looking for this exact table for a year. I’ve even downloaded another version to build because I thought it was the closest I could get to what I wanted. Luckily, I saw your video and have thrown those plans away. How can I get I get a copy of the plans for this? Happy to pay! Thanks so much! Terry
This is exactly what I'm looking to do with a miter saw station I want to build. How is it holding up with the lag bolts? I've seen other videos and people used 1" pipe for the spin factor. Overkill? Anything you would do differently now after using it for a while?
What do you do with the gap on the rotary tray when the miter saw is up and in use, did you just shim the saw up 1/4" to make up for that gap so the saw is flush with the tabletop? I'm having trouble with why it was gapped almost a 1/4" if the 2x4's and plywood are the same measurements(it should just rotate the plywood from top to bottom and the 2x4 is 3.5" flush as is, is it because some of the wood is planed?
At the beginning of the video, it showed him squaring off the 2x4s to lose the rounded edges, by trimming off +/- 1/8” from each side, then running through the planer. I suspect this is where the lost 1/4” came from.
Loved the project. Nicely done! Great result. I was pretty confused about your use of your tools a few times though. Not saying you did wrong since it worked. Like cutting the top with the tablesaw at the floor instead of using the perfectly fine circsaw, and drilling with the impact instead of using the drill thats laying next to you. Was there a reason for doing this?
there was a metal one we used 20yrs ago, we called it the trimbox, held the power miter had big drawers for routers and jigsaws and such small drawers for fasteners had a light multiple electrical outlets compressor and had wings so she got about 1214 feet of table space when you put both wings out. Anybody ever seen one of those? I’ve been looking for him for 10 years
I've seen so many of these but YOUR design is the BEST I've seen and very well explained. LOVE IT! Finally found the one that I will try to replicate nearly exact. Only thing I'll do different, is make it 2 separate rolling workbenches that can bolt together when desired for the extra length, but otherwise can be separated so I'm not always stuck with an 8 ft table.
Sounds like an excelent idea to me.
i like how u listed the materials at the start of the video. no one ever says what they start out with. great video
Interesting piece of work. I will definitely be using this idea. Something helpful you may or may not know or think about. Cover your top plywood for your table saw run and the bottom of the miter saw with formica fairly cheap at Lowe's or home depot. Get some turtle wax to put on the formica every once in a while to help your wood glide off your table saw with ease.
Copied this but made it my own dimensions, one of the coolest things I've ever made, thanks for the idea!
As it should be done. Not all people have the same available space for either building or using the item, or for theirs to have the same dimensions.
Incredibly gifted and entertaining. Not only a high quality workbench but tornado shelter. Lol
Excellent build! I think that this would work in my garage. Thnaks for sharing 🪚
Your use of the 2x4 half lap combined with the laminated square cut but joint supporting top and bottom is great methood. Well done!
Nice job. I liked how you done your table. It does inspire me. I am going to build one myself. Thanks.
Thank you, looking for way to add the miter saw exactly the way you made it. I didn't want it hanging, thank you.
I like this and totally doable, Just what I was looking for. What I may add to this, is a router at the other end, similar to the table saw.
I made this bench this week, but added a router table to the opposite end. Thanks for the walk through and instructions. Now subscribed. Dom
p.s. I tried to add images, but for some reason, I can't.
Cool! Really like the fixed miter saw flip. 👍👍
Thank you for sharing your build. I can definitely identify with your space issues. I have use of one side of a two car garage, so the ability to easily move equipment is vital for me. I enjoyed the way you included your thought processes while moving along with the build. Thanks again and keep building and filming!
this is a great idea! I'm just starting out so I'll be messaging you for those plans - I can't wait to get started!
Congratulations on your work table and for sharing and we can use your idea. thanks
Like the video really like the way you did the miter saw great job
thank you so much for such a great detailed video. I'm still working on my build and I just appreciate the way you walked through it.
this is what i will be making this fall when it cools down here in AZ... looks exactly like i was wanting. i just dont have a plainer to smooth things out..
Very cool project bro! The turning miter saw section is really simple and smart! good job
nicely done video, great thought on the build with the flip for the miter saw.
I like it. Simple and functional. A lot of videos with stuff like this get overly complicated. And yeah, maybe it looks better but you just take more time and money to build it for no real functional benefit.
I just got a miter saw and was looking for content like this. Looks good, I will reference your build when planning my own. Thanks.
Great job. I really like the order in which you added the bottom and saw platform. I’ve watched several of these builds and this was the smoothest I’ve seen.
Such a great video to following alone with. Especially for beginners like me
This is excellent! Thank you for inspiring my next build!
Greetings from the UK 🇬🇧
Might also be helpful to cut a hole under the table saw to catch sawdust then put a bucket underneath to remove it when it gets full.
@jbuildsdiy thanks for the lesson. Fully explained and simple enough for me to understand
I want to build something just like this so it was really helpful seeing your build. I love the flip miter saw section. Thank you!
exactly what i was looking for, since i was using that exact table with what looks like those exact saws. great build.
I always like DIY’er video’s like this of which contain both a list of materials, an audio narrative by the builder (and possibly the exact dimensions), as well. - Why? - Because.
- ONE - The builder thinks of others who may, or may not be trained and experienced enough to build their own but which both need a certain item for themselves and of which are possibly inspired and motivated to do so themselves as a DIY’er by watching video’s of what others have already built for themselves.
- TWO - The builder explains “HOW”, he has done something during the building of that item, as well as “WHY”, he has done something a particular way during the building of that item.
- THREE - The builder lists all the materials necessary for building that particular item.
Yes. A standard “Run-of-the-Mill” DIY’er video containing nothing but the builder building something (which sometimes generally contains a speeded up sequence), which also only contains background music (of which generally consists of music that the builder enjoys, but many times others themselves do not enjoy listening to), with no audio narrative of “HOW” and “WHY” something is done in a particular way, or sequence, and for a particular specific reason, may inspire someone else to build that item because they need it for themselves.
But in overall essence, it many times leaves the viewer and the potential builder of such an item in a predicament of “RED-FACED, SHAME” at the end of their own build because either during the building process, they overlooked something and/or left out a specific step, sequence, item, or even a necessary item (or items), from the needed and required materials list, and therefore have to keep returning to the store for further necessary and required materials to complete the build.
Also Not to mention that at the end of the build their own item of which they so proudly built themselves either:
- ONE - It does not stand up to long-term usage.
- TWO - It does not look good overall.
- Three - It leaves the inspired and motivated potential builder in "Red-Faced-Shame". And many times,
- FOUR - It does not even come close to matching the original item except in a slightly off-hand general sort of way.
Thank You for "A Job Well Done" - This is the way all of them should be done.
Simple, functional, I like this. Great job man! 👍
Love this setup!
Amazing build! I’m building this exact bench!!! Love it! You Rock!
Outstanding video, thank you so much!
I agree with everybody else here, this table seems great and would really suit my new workshop (garage). I would love it if you would send me a copy of the plans for the build. Not sure if I need to send you a PM or not?
I like it. I m copying it with minor hight changes.
the simpler approach i was looking for, thanks for sharing
I enjoyed this tremendously.
fire bench
This is a pretty good guide. Some tips:
1) Make sure you really want a 40" bench top before you follow his plan. Standard countertop height is 36", so 40 is pretty high. I didn't check before I started and ended up taking it apart and lowering it.
2) This workbench is way overbuilt. You could really cut down on your material costs, build time and reduce work if you need to alter the design at some point in the future if you just simplify the build. You can safely eliminate four of his eight legs, though I haven't added the miter saw yet. Those four supports should need no more than one 2x4 each. Mine is pretty rigid and only has corner legs with doubled up 2x4s. Just overlap everything. He used 20, 2x4''s. I needed only 12.
3) The casters he uses are terrific.
Agreed. Check your height to make sure that’s where you want it. I call this out in my plans I’ve sent some people. That ends up being your preference.
For the legs, agreed you can add single legs. The double up of 2x4s can be eliminated by just using 4x4s instead of single 2x4s. The double up is just for aesthetics. I don’t recommend eliminating 4 of the legs in the middle. If you do add the miter saw section, it will bow in the middle over time. It also depends on the miter saw you have. A heavier one will definitely make it bow. So for those reading this, don’t eliminate the legs in the middle if you add a miter saw. If you prefer to, that’s your choice but it will bow over time with all the movement in the middle.
@@jbuildsdiyare a hard copy of these plans available?
I have watched quite a few of these builds and this one is by far the most practical, and looks amazing too, love the content mate, keep it coming! a follow from me 100% - keen to get started on this very build myself in a few weeks!
This was a great idea thank you for sharing from Edmonton Alberta Canada
Very cool design. I think this is exactly what I need.
Very great and perfect.
Thumps up!
Greetings from holland.
I would love to see what size screw you used to attach Mitre to the base and where you attached it
Great build!! Very nice!
Great build, Definitely will be referencing this video for help in the near future.
Very cool design!
This is beautiful, and exactly what I'm looking to build! I emailed for the step-by-step and already received them; I can't wait to get started this weekend! I'm going to see if I can figure out how to mount my Kreg jig or some other low profile tool to the other side of the miter flip top. Then it could be covered with a temporary plate while in use as an outfeed. Thank you again!
You mentioned that you received your plans for the build. Can you tell me how you contacted Jay? I emailed him a few days ago to ask for the plans. I haven’t received a reply Really like to get started on this bench. Any help appreciated.
Sent you and email for the plans! You did an awesome job on this one!!
Very nice design. I would recommend putting some diagonal bracing on it though, to prevent the bench from racking/moving over time. That would greatly improve the longevity of the bench.
Nice! Giving me great ideas!
thank you ,great build
How did you attach the miter saw, so there are no bolts or screws on the top side when flipped
You can use 1-1/4" to 1-1/2" wood screws and washers to secure the miter saw to the tray. Just ensure they do not protrude through the other side of the plywood. (that's what he wrote in the video description)
Wow. Well done. Thought the framing was a bit elaborate for a workbench though. Still trying to figure out why? I’m the same way, though. I got myself bogged down sometimes on the job and I had a boss woh would come along and go, “we’re not building a piano here…”
this is exactly what i am looking for! nice job!
Dope build thank you for that one
Good job man. 👍
That's a great table. I only have a small woodworking workshop (10'x13'), so my cutting table will need to go in my garage (which is also the laundry and storage). I need a table that is this neat and won't bother my partner. Will email you for the plans!
I have my workshop in the attic, but I need a stable workbench. Not yet there 🤣At least I have an idea / inspiration from you :D
Excellent video that anyone should be able to understand! Best video series so far with very clear instructions! I appreciate and thank you for sharing your wonderful and professional experience with all of us and keep up the good work plus the nice videos you are providing! By the way, what's your location!
Awsome build ! Im just curious how you secured the miter saw to the plywood so it doesnt show on the other side thanks
Good question,
You can use 1-1/4" to 1-1/2" wood screws and washers to secure the miter saw to the tray. Just ensure they do not protrude through the other side of the plywood. (that's what he wrote in the video description)
Great idea and just what I am looking for. I will email you for the plans.
You skipped the whole part where you marked and cut out the table saw section with the cut outs on the plywood.
This is great and all but you left out how you actually secured the saw to the table with no-show screws and how you avoided interference with the saw and the rear cross brace when the saw is flipped under.
This is awesome. I am currently renovating my garage, have my miter and table saws just awkwardly sitting on the ground. This would be perfect but as simply as you laid it out I am pretty brand new to woodworking and it still feels like too much for me to take on especially considering that I would need to reduce the length to 5.5 or 6'. Just a little too complicated for me! Plus I don't have a jigsaw or planer @ the moment : \
Really great vid, though.
I would love to get the plans for this bench before I start my own. Is there any way to obtain them? Thank you so much!
Nice!!!
Great job. I too just emailed for some plans. Thanks in advance
I like the design, but you lost me on the post, which I thought was really really interesting. I need a workbench like this because I’m also working off of a picnic table lol
Could you please send me the plans for this?? I love your design! Well done.
Awesome build! Is there a way to get the plans for this?
How does one get your plans?
How did you figure out where to drill the hole for the bolt to get the flip top to flush with the table and still get the 3.5" depth for the miter saw to be flush with the table when in use? Can you provide that depth and center location to drill the hole for the bolt? Thanks.
Great video. In the future, you should either turn the music WAY down, or get a mic so I can hear what you're saying.
Little less coffee talk, but cool design!
Nice design and I am building it now with some mods. Question on the table top, why not just set it on and clamp it, trace the underneath side, then remove and cut out the pieces? This would save a lot of time trying to make sure you have an accurate measurements.
Your bench is great, exactly what I have been looking for. Do you have plans that I can download.
Thank You
Jon
what are the measurements for where to drill the hole pivot point for the miter saw mount? Would you be able to explain that?
Do you have a cut list? Mitre saw opening?
Id love to get the plans for this
I was going to just have a lower platform for the drop-saw and have lid I could put on when the drop-saw wasn't in use, but might rethink that issue.
Hi, what dust extraction do you use for your dewalt table saw?
Awesome build J. I am searching for a build to do a mobile work bench and i like yours. It's simple for the average DIYer to complete, and after watching your video a couple of times I want to tackle this project this coming spring. How do I get a copy of the build plans and my miter and table saws are different so what are the critical measurements I should be aware of for proper installation. Again, great video looking forward to doing this. Terry....
Hello Terry, please email me at jbuildsdiy@gmail.com
@@jbuildsdiy 5:03
J, what a great job on this table. I’ve been looking for this exact table for a year. I’ve even downloaded another version to build because I thought it was the closest I could get to what I wanted. Luckily, I saw your video and have thrown those plans away. How can I get I get a copy of the plans for this? Happy to pay! Thanks so much! Terry
@@ccatt28 Thank you! Please email at jbuildsdiy@gmail.com
Where can I find the plans for this (shopping list, cut list, step by step, etc)?
Can I get the plans too! This is great😮
Email me at jbuildsdiy@gmail.com. I’ll send them right over. 👍🏼
Great video!!
Would love to have the opportunity to build one.
Is it possible to get the plans?
👍🏼 Go ahead and email at jbuildsdiy@gmail.com
Nice job! Do you sell the plans for this work table?
Awesome!! Subscribed! I would love to do the flip thang with my miter saw, but I have the rigid 12 inch compound slider and think it's too big
I have the 12" rigid as well and believe this can still be done with some modification to the design.
Can you show the calculations or the formula you used to determine where to put the bolts for the miter flip top?
I hope your slap was flat/level. Good video, gave me some ideas
Could I get the plans?
Hi Jamie, Love this plan how can I get a copy of them?
Can i get the plan to
This is exactly what I'm looking to do with a miter saw station I want to build. How is it holding up with the lag bolts? I've seen other videos and people used 1" pipe for the spin factor. Overkill? Anything you would do differently now after using it for a while?
What do you do with the gap on the rotary tray when the miter saw is up and in use, did you just shim the saw up 1/4" to make up for that gap so the saw is flush with the tabletop? I'm having trouble with why it was gapped almost a 1/4" if the 2x4's and plywood are the same measurements(it should just rotate the plywood from top to bottom and the 2x4 is 3.5" flush as is, is it because some of the wood is planed?
At the beginning of the video, it showed him squaring off the 2x4s to lose the rounded edges, by trimming off +/- 1/8” from each side, then running through the planer. I suspect this is where the lost 1/4” came from.
@jbuildsdiy any idea what the clearance needed to flip that saw? I have the same saw was curious since you never showed the saw mounted. Thx
CanI please get the plans? Im looking to build it this weekend.
Thanks
Loved the project. Nicely done! Great result. I was pretty confused about your use of your tools a few times though. Not saying you did wrong since it worked. Like cutting the top with the tablesaw at the floor instead of using the perfectly fine circsaw, and drilling with the impact instead of using the drill thats laying next to you. Was there a reason for doing this?
there was a metal one we used 20yrs ago, we called it the trimbox, held the power miter had big drawers for routers and jigsaws and such small drawers for fasteners had a light multiple electrical outlets compressor and had wings so she got about 1214 feet of table space when you put both wings out. Anybody ever seen one of those? I’ve been looking for him for 10 years
Do you still have step by step build plans? If so how could I access them. Thanks!
how did you attached the miter saw without going all the way through the plywood into the top?
I really want these plans!!! Do you heave them anywhere to purchase?