6:36 I struggle with this the most, is it ok if I flood the neighbouring caps with solder mask, any negative effects? electronically speaking I keep on bridging the other caps to the flex, and getting it out is a nightmare.
Use better flux and solder. Like kester 60/40 0.031", and MG Chemicals 8341. Could also be your tip or temperature. I wouldn't put solder mask on anything unless you need to insulate something.
They are in the section where you find clay and sorry paint for small scale cars and toys. It’s a set of 4-6 I believe all silver and with different shaped ends.
Good afternoon, please tell me. The indicator lights up constantly white like in your video when you first connect to the network! I tried connecting the battery, but it didn't help. white incl. Where to watch?
I personally use a xacto knife to expose vias. What flux are you using? Try Stirri if you haven't already. The way it was explained to me is Stirri is Amtech formulas, just you can buy directly from Stirri unlike Amtech. Would love to see a video on it. I'm waiting to go through my MG Chemicals syringe before I buy some Stirri. Great work as always, thank you.
Been extremely busy plus had a small incident but we are back on track. Send us a message via our site we’ll reply promptly. Thank you for your support.
thanks for your efforts, but lad... why are you in such a RUSH!!!!!??? LOL CALM DOWN!!! 😂😂😂 by the way i just installed it the way that you did, i didn't dare to do the Kamikaze! i just destroyed another one...
this was beautiful, you made it look so easy
Thanks for the great video! Did you use leaded solder at what temperature?
We do use leaded solder 720 f.
Hey do you mind telling me what brand of sodder and the wire you used?
I love these chips. They're all I use.
A grinding pen works wonders on the CLK point, RST point, and for Kamakaze as well.
Thank you for the advice my friend.
I can’t find these chips anywhere at all.
@@NinjaAj_1990 shoot me a PM..
Where do you get these Instinct chips? I found one on Aliexpress, but the review photos look nothing like the real one, kinda looks counterfeit
What tips are you using for your iron? What type of tips would you recommend to perform this modchip?
I believe it’s CK-115 fit halko
6:36
I struggle with this the most, is it ok if I flood the neighbouring caps with solder mask, any negative effects? electronically speaking
I keep on bridging the other caps to the flex, and getting it out is a nightmare.
Use better flux and solder. Like kester 60/40 0.031", and MG Chemicals 8341. Could also be your tip or temperature. I wouldn't put solder mask on anything unless you need to insulate something.
I found solder mask can cause shorts.
@@Wayayeo
The UV ones? doubt it. Maybe your multimeter is too sharp?
Great video. Can you show the metal pick or a link to it? I have a hobby lobby not far from me. I would like to pick one up.
They are in the section where you find clay and sorry paint for small scale cars and toys. It’s a set of 4-6 I believe all silver and with different shaped ends.
@Wayayeo Thanks!
I like your work and soldering.. nice job ❤❤
Thank you very much!
Good afternoon, please tell me. The indicator lights up constantly white like in your video when you first connect to the network! I tried connecting the battery, but it didn't help. white incl. Where to watch?
Check your soldering. Use multimeter in continuity mode. Check for bridges or shorts. Good luck
What’s the real difference between rp2040 and the v6?
Faster glitch times, more reliable, and zero risk of corrupting the NAND.
@@PaulFlart-MallBlart i cant find the instinct v6s sold anywhere
@@italonelli1233They're out there. I buy them in bulk.
I personally use a xacto knife to expose vias. What flux are you using? Try Stirri if you haven't already. The way it was explained to me is Stirri is Amtech formulas, just you can buy directly from Stirri unlike Amtech. Would love to see a video on it. I'm waiting to go through my MG Chemicals syringe before I buy some Stirri.
Great work as always, thank you.
Thank you for the tip. Will try that flux and use on future video.
Gr8 vid wonder if that was my oled beeing worked on lol… expecting mine to come in tomaro via ups.. thanks!
It Probably was. Thank you 🙏
Are you closed for business? Tried emailing and contacting u guys but got no answer. Looking to mod my switch oled
Been extremely busy plus had a small incident but we are back on track. Send us a message via our site we’ll reply promptly. Thank you for your support.
Im thinking qbout getting this installed on my oled, how ling would it take?
2-3 days after receiving depending on the day and how busy we are. Reach out. Let me know if I can help.
Se pasa de vrg con la instalacion parece que nacio con un cautin!!! Buen trabajo
😂
thanks for your efforts, but lad... why are you in such a RUSH!!!!!??? LOL CALM DOWN!!! 😂😂😂
by the way i just installed it the way that you did, i didn't dare to do the Kamikaze! i just destroyed another one...
That’s funny 😄. Thank you for your comment.