Conseguí ponerlo en hora manualmente, a punto de tirarlo ya. * presionar con un lápiz el botón set y soltar. *volver a presionar el mismo botón sin soltar hasta que llegue a la hora deseada, y soltar entonces.
I encountered the same problem. There is a button on the left "Set" hold that button until it starts moving when you release it it's stops. After you set the right hour press the button in the middle once and the clock is set.
I just played around with one of the many clocks on the job, and figured it out. I wish there was a simpler way, because what if the clock is 8 hours behind? You gotta keep that button pressed until you get the right time 😂
Question: My Lidl radio-controlled wall clock operated 2 years perfect antil yestarday. Its self change the time-zone. I am in eastern european time zone and when I remove batary and try to reset it, arrows are stop on 2 o'clock enstead 1 o'clock. How I can change time zone on model HG05089.
From the leaflet: RECEIVING THE RADIO CONTROL SIGNAL The radio-controlled clock will automatically receive the radio signal 12 times every day. It will take 3-12 minutes to receive the radio signal. During force DCF reception, by pressing the REC button (3) for 3 seconds, the clock will go to 12 o’clock and start receiving the radio signal for 3-12 minutes. Once it has received the DCF signal and processed it accordingly, the clock automatically displays the correct time. If the clock still has not set itself after 12 minutes, reception is faulty and it will resume the time before the forced reception.
Everytime the battery run out ,i forget how to adjust it.
This is the sixth or seventh i watch your video.
Thank you very much
wowww, how muck of the nervs I saved, thanx bro
Sincere Trail
Conseguí ponerlo en hora manualmente, a punto de tirarlo ya.
* presionar con un lápiz el botón set y soltar.
*volver a presionar el mismo botón sin soltar hasta que llegue a la hora deseada, y soltar entonces.
In my watch, I do everything as you show, but when you release the button, the minute hand continues to run Endlessly
Same problem
It's defective 😮
I encountered the same problem. There is a button on the left "Set" hold that button until it starts moving when you release it it's stops. After you set the right hour press the button in the middle once and the clock is set.
That means it's not picking up the radio signal
@@greego5952 yes, signal is very poor
Thanks for your video it's been very useful your voice looks like Tom Hanks in Pinocchio 😂
Oh! Thank you ever soooo much! It was rocket science to me...
I just played around with one of the many clocks on the job, and figured it out. I wish there was a simpler way, because what if the clock is 8 hours behind? You gotta keep that button pressed until you get the right time 😂
I've put the user manual up in another video here, I'd wait till the hour coincides then set it, hehehe, easier than keeping the button pressed..
@@frankmartinez1045 true 👍🏾
Thank you , my battery run out , but couldn't remember how to reset it .🙂
Question: My Lidl radio-controlled wall clock operated 2 years perfect antil yestarday. Its self change the time-zone. I am in eastern european time zone and when I remove batary and try to reset it, arrows are stop on 2 o'clock enstead 1 o'clock. How I can change time zone on model HG05089.
Hi check the manual I've uploaded, Auriol email there for any enquiry, check "Reset" and "Receive" functions.
ruclips.net/video/-Hj1up_YE6I/видео.html
Second hand on my clock is not workin now, but rest of the clock is ok? 😁
How to make the clock get the radio controlled hour automatically... for example now after the 31 of october time change?
From the leaflet:
RECEIVING THE RADIO CONTROL SIGNAL
The radio-controlled clock will automatically receive the radio signal 12 times
every day. It will take 3-12 minutes to receive the radio signal.
During force DCF reception, by pressing the REC button (3) for 3 seconds, the
clock will go to 12 o’clock and start receiving the radio signal for 3-12 minutes.
Once it has received the DCF signal and processed it accordingly, the clock
automatically displays the correct time. If the clock still has not set itself after 12
minutes, reception is faulty and it will resume the time before the forced
reception.
Hayden Turnpike
Wolff Place
Auricle quartz
Tik - Tok??? I thought I was on you tube!
ur taking the mick and fix ur voice up mate
Thanks, but you should really say which button is it, like something is written there. I guees it is set ?