Terry, thank you for the clearly explained instructions. I got my older atomic clock reset with ease, after viewing your instructions. Lost my instructions years ago, and messed around with resetting this clock for the past couple of days. Got it reset and running correct time in apprx. 15 minutes. Thanks again!
March 2022 - This video matches the button and reset tab identically to the unit I own. So I am sure the easy to understand steps will work. Many thanks for making this DIY video.
I love my LaCrosse clock. This spring forward it didn’t update so I tried a new battery. It was doing all the things you said and I thought it was broken. Thank you so much for helping!
This video was exactly what I needed to reset my Sharp Atomic clock. All the buttons are the same. For years, the clock would keep time and reset to Daylight Savings, but the second hand was frozen. This did the trick.
We're happy to hear that! For additional information, our updated version of this setup process can be found in our video here: bit.ly/wallclock_setup 😊
This video is great! I don't remember how long I have had this clock, nor can I find the manual. I learned from this video that the battery needed changing and how to do that properly. Thank you so much!
Thanks for the comment, Rex. If you ever need to find your item's manual, our search feature here: www.lacrossetechnology.com/support/?type=manuals may be a good place to start.
I've had my La Crosse wall clock for years. Still works great so I highly recommend. I'm in Michigan and have no trouble getting the signal within a few hours. Don't have to ever set it or mess with it until it needs a battery, they last months in the clock.
So glad I came across this video. I took a radio controlled clock from my mom and it started acting all wonky. I had no clue how to work the darn thing. Thanks to this video, I do now! Thank you!!
If I’d only known about this YT video. Last week my clock started spinning crazy and stopped at 4:00. The next morning (I’m on the East coast) it was displaying the correct PST. I want EDT. Before I found this video I removed the battery. But, according to this video, I should have simply pressed the ET button until the hands started moving. After watching the video I removed the battery, waited 15 minutes, pressed the reset button 20 times and loaded a fresh battery. The clock started up for 15 seconds then paused for a few minutes and then advanced to the 8:00 position where it will wait until it gets a radio signal from WWVB. I bought this clock more than 10 years ago from Fry’s. My clock has a nice minimalist face (no numbers) but is no longer in the LaCrosse catalog. This is the old mechanism as shown in this video. Newer mechanisms have a slider switch to set the time zone instead of four buttons and a switch instead of a button to disable daylight time. Recently I bought a newer Lacrosse analog clock for my office which supposedly decides the enhanced WWVB time signal (able to read a weaker signal). I ‘d like to upgrade the mechanism in the old clock if it will fit in the same form factor.
Hey Eric, we are thrilled you have enjoyed our wall clocks for such a long time and appreciate the comment. For a better understanding of our clock movements, our updated video here: bit.ly/wallclock_setup could also be helpful. As for replacing a radio controlled clock's movement, unfortunately, this is not something we'd do as the calibration process with its hands is performed at the factory level. In these instances, we'd recommend updating the older model as well. For help finding the correct item (and to receive a loyalty discount) please reach out to our store directly at 608-785-7939 or via email at: store@lacrossetechnology.com 😊
Thanks for the video, it helped. I wasn't exactly sure on how to set the time zone. I have troubles every time daylight savings comes around like today. Hopefully from now on I won't have any trouble. I've had my La Crosse clock for years, works great!
Thank you for your kinds words. If you have any issues in the future contact us on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page
I have a Lacrosse Model WT 3144 and the La Crosse web site doesn't even list this model to get a manual. This looks just like mine on the back, great video.
Hi Tom, sorry about that. Our website is picky and requires you to enter the dash in between the WT and 3144 (WT-3144) in order for it to show up in the dropdown. But here's a link to your manual if you still need it: www.lacrossetechnology.com/media/catalog/product/w/t/wt-3144s_072117.pdf
I just went to the company web site and put in my search as WT-3144 and it comes up with 2 choices of WT-3144P and WT-3144S after looking at both of the manuals the back of the clock where you do your settings looks nothing like mine. My clock looks like the one in the video. Hopefully the company has a manual so I can print it out for future use. Thnaks
@@Tom-qn5nd, sorry about that. This item did indeed get updated to a newer movement a few years back. If you have an email you'd like us to send the old manual to, please pass it along here or privately on our Facebook or Twitter page. Alternatively, you can message our support team here: www.lacrossetechnology.com/support/index/form/ as well, but this may take a bit more time. Sorry again for the confusion. bit.ly/LaxTech_Facebook bit.ly/LaxTech__Twitter
Gotcha, well this actually is not an item that is made by us, so we cannot give a definitive answer, but our guess would be if you've been using it since the 1980s, adjusting the dates for the DST setting is likely not an option. If you're looking for an upgrade, we'd highly suggest our S87078: www.lacrossetechnology.com/s87078/ which can be found for a better price on our Amazon outlet store: bit.ly/S87078_Amazon
In addition to Arizona and parts of Indiana, the province of Saskatchewan, where I live, stays on Central Standard Time all year round and does not observe D.S.T. On most days, the clocks set themselves within 5 minutes, depending on time of day and weather condition. Also I have used AA lithium batteries in these clocks with no after effects, getting close to 2 years from them, simply because they last longer.
Hello Terry, I have a La Crosse WT-3181P, and i moved to the Atlantic Time Zone recently. Since the clock only has 4 time zones (PT, MT, CT, and ET) I thought I would try the manual steps. I removed the battery for 15+ mins, hit the manual set tab 20 times, then put battery back in and set the time. Still found the ET zone and my clock went back 1 hour! hehe Any suggestions?
Jan 13, 2017 - I just purchased a used SHARP WWVB radio control clock. Luckily, the movt you featured in your video matched perfectly my wall clock with hands. It's running GREAT right now. Only a comment and a question... I wish the "No DST" button was better labeled. Or showed an LED or a "BEEP!" sound showing it's enabled. It's a bit of a guessing game. Q: There is a small black hole left hand side of the movt with two wires or leads I can see. Do you know what that hole is? Is that the WWVB antenna? Take care, ~ Dave in Rochester NY
That might be a reset contact. If the controls don't work or the clock gets wonky you can take the battery out and close the circuit by placing the blade of a metal screwdriver or a paperclip across the prongs to ground out any residual power and restore the clock to its original setting.
So it is facing Fort Collins, CO would have been a more accurate statement. 😬 Sorry for the confusion. Our updated wall clock setup video here: bit.ly/wallclock_setup offers additional insight on this an other clock models.
Good luck! If you figure out how to MANUALLY set this !@#$ thing, please post a video showing how. I just put mine outside for a few days after every battery change.
@ckeilah remove all batteries from the clock, press the tab 20 times, wait 15 minutes than put the battery back in and when the hand stop at 4,8,12 o'clock position press the set tab again to move the hands and after 2 minutes of no activity the clock is set
We have 3 of these in MA that one of my clients bought. They have never worked (they are made by a different vendor, made in China, called Chouchin). Each of them was left on with new batteries for 2 weeks and the time was never correct, so they were set manually, like a 5 dollar clock from Walmart. One does have to wonder why it needs to take 3 to 5 days to set a clock.
Hi Jim, we are truly sorry your clocks were unable to pick up the WWVB radio signal from Fort Collins, CO. right away. The reason it can sometimes take 3-5 nights (or possibly longer) is due to your location, both geographically and where you have the clocks placed within your home. Moving these away from other electronics and near a window with the front or back of the clock facing Fort Collins will greatly increase your chances of receiving this signal. For more information please visit our website here: www.lacrossetechnology.com/atomic-time/ and use the NIST and Smithsonian links to learn about how exactly these work. If you believe these are defective, feel free to contact our support team here: www.lacrossetechnology.com/support/index/form/ to work out a possible replacement. Sorry again for the inconvenience.
If you own a clock with a movement like the one in this video, it cannot be set to Hawaiian time for atomic connection. However, it can be set manually following the instructions covered in our updated video here: bit.ly/wallclock_setup -- But we should note that if the clock does receive the WWVB signal, it will automatically set to Pacific Time as shown in this video. For atomic connection and the ability to set to Hawaiian time, we would recommend our UltrAtomic clock: www.lacrossetechnology.com/products/404-1235ua-ss. Our apologies for any inconvenience.
I have an ultratomic clock which have a complete different movement and there are features that I don't know what it is meant for such as ECO mode, so how can I do this?
Hey Bukui, sorry for the confusion. Our suggestion would be to review our updated wall clock setup video here: bit.ly/wallclock_setup -- If you have any further questions please just let us know.
Hello, I have recently bought a La Crosse Technology WT-3122A 12 1/2-Inch Wood Atomic Analog Clock, but haven't set it up yet. I live in the Pacific coast region. Since the default is PT, do I just put the battery in and leave it? Or do I push PT again?
These can be found on some of our older movements, and if you touch something metal to them, briefly, the hands should align to the 12 o'clock position and stay there until the atomic (WWVB) signal is received.
A better design would be to have the ability to set the time manually and then when it picks up the signal to fine tune itself. Then it would always function as a clock under any circumstance. I got the hand me down from work because it takes too long to adjust itself.
Hi Chev, this is actually an option on most of our models. We just recommend to wait for the signal, however, the clock itself can typically be set manually as well, and once the signal is received it will override your manual setting. We apologize for any confusion.
What are you talking about, my clock adjust April and Oct only. What I want to know is how to change that to Mar Nov to reflect current time changes and no new clocks have been created. What I have to do is change time zones to show EST to DST and back. I have 7 zones to select from.
I know this is probably a dumb question but when I set up my clock, it did the whole thing demonstrated in the video and landed on twelve. Then after seven minutes, it started without fixing itself. (eastern time zone) Is that what it is supposed to do?
Hi I have WT-3161 long time and I leave in Toronto. So far working properly but I always have a problem with DST. It didn't adjust itself. I reset many times and pick up the signal but shows always normal time, not DST.
What's the difference between the WT-3161 and the WT-3161WH? I thought they were the exact same clock, just with a black background or a WHite background face. La Crosse Technology's comment makes it sound like there are mechanical differences with the mechanism. Perhaps that's why NOTHING happens when I hit the "manual set" button, now called a "tab"...?
Guys I figure out the technology behinds this. It basically sends a signal which is picked up by a boy with a white horse. The boy will then ride to the La Crosse "Technology" headquarter and ask for the time and then ride back. This approximately takes 3-5 days depending on where you live.
An interesting explanation to be sure, however, our clocks are actually radio controlled by the WWVB signal broadcasted from Fort Collins, CO. You can find more information about the signal here: www.nist.gov/pml/time-and-frequency-division/radio-stations/wwvb As this is a radio signal, the time it takes for your clock to receive it truly does depend on where you live and where you have the clock set up. Moving it away from other electronics, near a window, with the front or back of it facing Fort Collins, CO can help improve your chances.
All of my clocks are radio controlled. Since I live in east central Saskatchewan, when conditions are perfect, it usually takes 3 to 5 minutes for the clocks to set themselves. When I found out that WWV and WWVB radio stations plan to shut down, I was pretty upset due to lack of funding. It seems pretty obvious that this govt seems to spend large amounts on money on stuff that is not even needed. This radio station will be 100 years old this year and will be sad to see it go. This govt does not seem to think that this radio station is still considered a essential service and a lot of people still use this service. Funding was never a problem for this radio service until the current govt got elected. People who use this service should contact the people in charge about this topic and them to provide them with any kind of help they can because a lot of people in North America still rely on these services
Hi Sue, we do not believe you should have any issues. For the best possible reception, have the clock's front or back face Fort Collins, CO and hang it away from other electronics.
Good news, I found a LaCrosse Tech weather station on eBay for under $30.00 . I assume it has auto update capacity. I will read details before buying. Always a good idea on eBay and Amazon, Cavite Emptor you know. Thanks a Million.
Another good idea would be to check our website as well, and make sure the item has the features you're looking for. We're here if you have specific questions.
You're a long way from Boulder Co. You should look for clocks marketed for your area and even then if that area of the world has a long-wave time standard transmitter. Otherwise, a manually set quartz movement is the way to go. These clocks can be manually set but then you have to reset it yourself for daylight time changes. Another option is to look for clocks that use signals from the constellation of gps satellites.
My battery ran out. I replaced it with a new batter, and it started up quickly and went to 12:00. I am in Florida. It has not moved from 12:00 for over two weeks. I tried another fresh battery.... Nothing! Can you help?
Check the sunspot activity, put the clock OUTSIDE, AWAY from all electrical devices, cords, etc. during a LOW sunspot time AT NIGHT. Your clock is trying to "hear" a very weak signal, from very far away, with a LOT of noise. If it doesn't work at your location, try again in a more remote location. The idea is to find a place where the clock can "hear" that weak signal over the noise of the environment. Sunspots create noise too. If you want to listen for yourself, just build a 60KHz receiver radio and listen to the signal and noise. Move around and see if you can get a stronger signal in certain places, and how loud the noise is. If you find a certain place/orientation/time that gives you a nice loud signal, put your clock there, and wait. Good luck!
So we got one of these clocks but live one time zone ahead of Eastern Time Zone. Everytime we would use it, it would alter time and end up 1 hour behind as expected. However I think I have a solution! I just pulled the hands off and will leave it a night or two to find it's time! Once it has will press them back on to our correct time and it should be fine, the hour hand being one hour ahead of what it thinks it is set at. Fingers crossed this works!
Hi I will check tomorrow as I have left work. Bascially I work for a school on the island of Bermuda and had thought your clocks would be perfect for us. However once I read the details on your website realised they would not. Then a few months ago a local shop was selling them and the shop purchaser said they work fine and they have had no returns. So I got it, but every morning it would rest itself to be one hour behind, eg Eastern Time as selected on the back. A few days ago at a friends he had the exact clock and he said he had the same ssue, but he opened the clock mechanism and cut the ariel so it can't get the signal. Then I just thought, pull the hands and let the clock reset to ET, then tomorrow I'll go online to get the world clock time for our region ie +1hr ET and press the hands exactly to this. The clock should just keep this setting, albeit thinking its set at ET not +1hr ET! I think this is the best we can do? I wonder at night how far the signal travels as maybe there is a market in other places outside the US if it had more time zone options on the back?
Absolutely if you have a recommended model for our time zone would be awesome to know. I'll find out in a day or so if the realignment of the hour hand works on this one.
I’ve had this clock for quite a few years and the last couple of years I’ve had soooo much trouble once the battery dies. When I put in a new battery it will just spin until the battery dies. I’ve somehow gotten it to stop but I have no idea what it was I did. I’m so tired of this. Please help. I’m in Southern California.
We are deeply sorry for the trouble and any confusion with your atomic clock. Our first suggestion would be to review our updated clock support video here: bit.ly/wallclock_setup -- It is much more detailed and goes over the setup steps for all of our atomic clock movements. If you're still having issues after this, please reach out to our support staff here: bit.ly/contact_techsupport -- they'd be more than happy to help get this figured out.
Hi Rebecca, for the best WWVB reception we recommend having the front or back of the clock face the direction of Fort Collins, CO. However, in many cases it will pick up the reception just fine if not facing directly that way. Our updated video here: bit.ly/wallclock_setup may be helpful as well.
I have accidentally pressed the DLS button. I am in Massachusetts and did not need to however my clock is still. Will this affect the proper time once it picks up a signal?
Hi Cassidy, we are assuming you mean DST button, but to answer your question, yes, your clock will be 1 hour behind after it picks up the WWVB signal. The good news is that once it receives this signal, you can simply press the DST button once more (and only once) and your time will adjust. Please let us know if you experiences any issues.
Hi Roberto, sorry for the trouble. Can you confirm that the battery installed in your clock is a new reputable regular alkaline battery? Other battery types can cause some undesired results. As noted in our updated video here: bit.ly/wallclock_setup the hands continuously spinning is often a sign that the battery is under or overpowered. If another battery change still does not do the trick, please try resetting clock. These reset instructions are also covered in this updated video. Of course, if further help is needed, please reach out to our support staff directly here: bit.ly/contact_techsupport -- We apologize for any inconvenience.
@@lacrossetechnology Thank you for responding to me and I have tried Procell, Pairder, Northern and Energizer. According to your comment and only regular alkaline battery would work? I haven't tried that type of battery, I will buy tomorrow , and will get back to you if that work. Thank you again
Just include a manual dial to spin the clock backwards to set time. I'm at work having to naturally hold set all the way around. And you dare not pass the at time..... cause you gotta go all the way around again. I hate these clocks!
We're sorry for the inconvenience. As shown in our updated video here: bit.ly/wallclock_setup, your work may benefit from a non-atomic option if their clock(s) cannot receive the WWVB signal for automatic time-change updates. Our non-atomic options have a much more straightforward setup and design, much like what you described. Our full selection of analog clocks can be found here: www.lacrossetechnology.com/collections/analog-clocks and our team is always here to help answer any questions.
Hi Christy, unfortunately if the hand is out of alignment like this, there isn't an easy fix. Without a professional, trying to fix this on your own may cause more damage. Since this is quite an old model, our suggestion would be to reach out to SkyScan directly here: skyscanatomicclocks.com/support/ We apologize for this inconvenience.
Thank you for your reply. I fixed my minute hand alignment problem this way... First installing the battery and letting the clock search for a radio signal and when it stopped at one of the 4, 8 or 12 o'clock positions, confirming that the minute hand stopped one minute behind. I removed the battery so the hands would not move, then I removed the clear plastic front. Not moving the hand forward or back, I carefully lifted the minute hand enough to where it was loose on the shaft. Now I was able to align the hand, then press it back down tight on the shaft. I reinstalled the battery confirming that the minute hand was landing right on the 12 when it stopped during search mode. It was, so I reinstalled the clear front, went through the time set procedure and now it is always the correct time!
My atomic clock auto adjusts in April and October, I haven't found one that is updated for March and November. Can anyone help. Frankly I get tired of the forward and back bull. Why not leave it at DST noon feels more like .noon in the summer then in the winter.
Hi Dano, this is quite strange, as all of our devices that use the WWVB Atomic Radio Signal coming from Fort Collins, CO will update and sync to the correct time on the correct dates each year (assuming the device is receiving this WWVB signal). Could you pass along the model number of your clock?
Hi Elvira, we're not sure what specifically you're referring to with the "prongs", but the reset steps are covered in this video starting at the 2:54 mark.
Hey Baris, our apologies for the trouble. It sounds as though your clock has lost its connection with the WWVB signal. To help reestablish this, we suggest performing a reset which is covered in our updated support video here: bit.ly/wallclock_setup -- If you should need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
Hi Michael, we'd first recommend following the reset steps at the 2:54 mark in this video (assuming you have this type of movement). If the back of your clock looks different, please review our updated video here: bit.ly/wallclock_setup which will go over how your specific clock will function. If after resetting your clock with a new battery, your minute hand still does not move, please reach out to our support team here: bit.ly/contact_techsupport -- they will help figure out a solution. We apologize for this inconvenience.
Assuming you have a model with the clock movement pictured in this video, our recommendation would be to remove the batteries, press the Set Tab at least 20 times, and wait about 15 minutes before installing new alkaline batteries. After this, follow the instruction as normal waiting for the clock to receive the WWVB signal, once it does, press your correct time zone button to have it set to the correct time. If this proves ineffective and your clock remains 15 minutes fast, please reach out to our support staff directly here: bit.ly/contact_techsupport as your device may need to be replaced. We apologize for this inconvenience.
Hi Chelie, if you've followed the reset instructions starting at the 2:54 mark in this video, and are still having this issue, please contact our support team here: www.lacrossetechnology.com/support/index/form/ They will be able to give more detailed feedback and/or help get you a new working clock, should that be necessary. We apologize for this inconvenience.
Hi Chelie, we apologize for the delay. Our support team works as fast as possible to move through their queue, but it can sometimes take a few days to receive a direct reply. If you could pass along your email address we may be able to speed up this process. Sorry again for the inconvenience.
jeez that sucks - having to wait for up to 5 'nights' for your clock to catch on to what time it is.. (and I think it probably will not show the right time of day either, whilst it is waiting for 5 nights?! ) there seems to be absolutely non logic to this - it cannot be that Col. only once every three of five days sends the time code, and it also makes no sense in that this man does not know whether you try to put your clock into operation on Monday or in Friday, so it seems it is this crazy clock itself that will only decide you switch on and start reacting after quite a while! not exactly superior a product.
Okay, that sounds a whole lot better, let's then agree that describing it as a process that might take up to five days (or was it nights) was maybe not the smartest possible way to put it if you would try to build some positive image for this thing. If you would instead explain it as you do right now, saying in worst conditions (whether, reception) it might take a while, that might install more confidence with your potential buyer? If the clock can set to the signal every few minutes ago through the day, I still don't understand that 'five' day thing though.. shouldn't that just be, for a long as heavy overcast or bad weather lasts, as long as the clock is not put up inside a vault or some place alike? Thank you for responding by the way, grs
You said two things that might be in conflict. You said to point the clock in a westerly direction. Then you said Colorado is where the signal is. I'm in California, so I would point it Easterly!!!
@@yodaddy6586, either. Just so one of the large flat sides are facing in that direction. This helps the antenna inside pick up the WWVB radio signal, which often happens at night.
This can mean that your clock isn't picking up WWVB signal or that it is wearing out. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We apologize for the inconvenience and look forward to helping get this corrected.
And where is the MANUAL SET VIDEO LINK? That's really the only way to reliably run these stinkers! We had these at work and they never set. Dumped them. I took a few home, but seriously - "put them in a west-facing window for 3-5 nights" and hope they catch a signal? "Press the side button 20 times to drain power"? Get a wall clock and set it by your smartphone time. These radio clocks are an antiquated exercise in frustration.
We apologize for the frustration, some locations have a harder time than others picking up the WWVB signal coming from Fort Collins, CO. If you would like to set the clock manually, we'll need to know your item's model number to offer specific instruction. Sorry again for the troubles.
Since there is talk that the NIST plans to shut down the WWV, WWVB and WWVH radio stations, is La Crosse Technology going to still manufacture products that use the 60 kHz time code to set the time? There are still a lot of items used in North America still rely on this to set time and if enough people would pressure the government and or congress to help with more funding, then it will survive simply because a lot of people, myself included, rely on this station for accurate timekeeping. If the government has money for other stuff, they can at least give them the money that the radio station needs to keep operating. I will be very disappointed, and I`m sure others will be, if the radio station shuts down for good.i
Hi Darrell, we completely agree, it would truly be an unfortunate thing if these systems were to shut down, however, until that time we cannot comment on our company's plans moving forward in this regard. We appreciate your support and understanding on this matter.
@@lacrossetechnology You could produce these clocks to synch to the GPS/GLONASS/Galileo satellite time signals instead. Each satellite carries its own Atomic Clock on-board.
Hi Riah, we apologize for the troubles with your atomic clock. It sounds as though you may be in a region that struggles to receive the WWVB radio signal normally, so you might have just gone and set the clock's time manually. We should note that once the clock does receive this WWVB reception it will override any manual setting (likely what is happening in your situation). So, it is important to follow the steps in this video, or in your item's full manual, to make sure you have the clock set to the correct time zone and Daylight Saving Time setting to avoid these incorrect times. Our video here: bit.ly/find_product_manual will help walk you through how to find your clock's full manual on our website. But please just let us know if you have further questions.
Hey Tony, we are truly sorry to hear this and apologize for any confusion. We do have an updated video on this topic here: bit.ly/wallclock_setup that may explain things a little more clearly. Once you're able to get your cock up and running, there's little more you have to do after that. Of course, if you have any questions or concerns, please let us know we are here to help.
How is that too much to do? What do you think these are magic clocks? I have had mine for years and never an issue. Buy yourself a digital clock if these are too complicated for you.
Thanks for the question, Ali. The main reason many choose an atomic, or radio controlled, clock is due to their accuracy. These clocks are able to sync up with the NIST's atomic clock via the WWVB radio signal coming from Fort Collins, CO. If time accuracy is important, an atomic clock is often one of the best choices. For more info on the NIST and WWVB signal, please visit: www.nist.gov/pml/time-and-frequency-division/radio-stations/wwvb -- If you own another one of our wall clocks, and are having trouble, we highly suggest reviewing our updated video on this topic here: bit.ly/wallclock_setup
Extremely complicated instructions, with no way to know if anything is working correctly, or received the signal or is continuing to receive the signal. It is the next thing to being 100% useless. I had one and of course it never worked.
We are truly sorry for any trouble you've had with our Atomic Wall Clocks, and invite you to view our updated video on this topic: bit.ly/wallclock_setup -- It covers how this technology works and goes over how to get these set up manually in the event you live in a location where the WWVB signal does not reach.
Hi Alex, we're sorry to hear this and apologize for the trouble. As mentioned in the video, this syncing process can sometimes take a few nights depending on your location. If you have further questions or would like to work through the process with our support staff, feel free to message our team here: bit.ly/contact_techsupport
The reason it can sometimes take 3-5 nights (or possibly longer) is due to your location, both geographically and where you have the clocks placed within your home. Moving these away from other electronics and near a window with the front or back of the clock facing Fort Collins, CO will greatly increase your chances of receiving the WWVB radio signal. For more information please visit our website here: www.lacrossetechnology.com/atomic-time/ and use the NIST and Smithsonian links to learn about how exactly these work.
We apologize for any inconvenience, this is a limitation of the WWVB radio signal and will largely depend on your location and the clock model you own. This is explained in a more detail in our newer video here: bit.ly/wallclock_setup
You can still set the clock manually if you wish, just know that once the signal is received it will override your manual settings. For item specific instructions, please refer to your full manual, which can be found using the steps in our video here: bit.ly/find_product_manual
It's much more accurate than a regular clock, my old clock always go off 3 minutes every week and I replaced it with this and now it's not even a single second off
Hey Maria, our apologies for the lack of Spanish support. We'd recommend reviewing our newer video here: bit.ly/wallclock_setup on this topic that does at least offer Spanish subtitles. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
This makes no sense. Why would i put this is a west facing window? Dude says that it needs to be facing Colorado. How is a signal from Colorado making it all the way to my house in California? There's a bunch of huge mountain ranges between me and Colorado plus Colorado is too my east. This video debunks the round earth theory and absolutely proves the earth is flat
Hey Travis, we are deeply sorry for any confusion. Please see our updated video here: bit.ly/wallclock_setup and let us know if you still have questions.
We are truly sorry for any trouble you've had with our Atomic Wall Clocks, and invite you to view our updated video on this topic: bit.ly/wallclock_setup -- It covers how this technology works and goes over how to get these set up manually in the event you live in a location where the WWVB signal does not reach. We apologize again for any inconvenience and are always happy to help in any way we can.
Hummm we're not quite sure what this is in reference to, but if you have a clock similar to the one in this video, we highly recommend reviewing our updated video on this topic here: bit.ly/wallclock_setup
View our updated wall clock setup video here: bit.ly/wallclock_setup
Terry, thank you for the clearly explained instructions. I got my older atomic clock reset with ease, after viewing your instructions. Lost my instructions years ago, and messed around with resetting this clock for the past couple of days. Got it reset and running correct time in apprx. 15 minutes. Thanks again!
Excellent summary of how to set a radio controlled clock from LaCrosse Technology.
March 2022 - This video matches the button and reset tab identically to the unit I own. So I am sure the easy to understand steps will work. Many thanks for making this DIY video.
I love my LaCrosse clock. This spring forward it didn’t update so I tried a new battery. It was doing all the things you said and I thought it was broken. Thank you so much for helping!
This video was exactly what I needed to reset my Sharp Atomic clock. All the buttons are the same. For years, the clock would keep time and reset to Daylight Savings, but the second hand was frozen. This did the trick.
We're happy to hear that! For additional information, our updated version of this setup process can be found in our video here: bit.ly/wallclock_setup 😊
This video is great! I don't remember how long I have had this clock, nor can I find the manual. I learned from this video that the battery needed changing and how to do that properly. Thank you so much!
Thanks for the comment, Rex. If you ever need to find your item's manual, our search feature here: www.lacrossetechnology.com/support/?type=manuals may be a good place to start.
I've had my La Crosse wall clock for years. Still works great so I highly recommend. I'm in Michigan and have no trouble getting the signal within a few hours. Don't have to ever set it or mess with it until it needs a battery, they last months in the clock.
We are happy to know you're enjoy your clock.
So glad I came across this video. I took a radio controlled clock from my mom and it started acting all wonky. I had no clue how to work the darn thing. Thanks to this video, I do now! Thank you!!
Thanks so much for video to help me replace battery and reset clock. I don't do it very often and video shows the steps.
If I’d only known about this YT video.
Last week my clock started spinning crazy and stopped at 4:00. The next morning (I’m on the East coast) it was displaying the correct PST. I want EDT.
Before I found this video I removed the battery. But, according to this video, I should have simply pressed the ET button until the hands started moving. After watching the video I removed the battery, waited 15 minutes, pressed the reset button 20 times and loaded a fresh battery. The clock started up for 15 seconds then paused for a few minutes and then advanced to the 8:00 position where it will wait until it gets a radio signal from WWVB.
I bought this clock more than 10 years ago from Fry’s. My clock has a nice minimalist face (no numbers) but is no longer in the LaCrosse catalog. This is the old mechanism as shown in this video. Newer mechanisms have a slider switch to set the time zone instead of four buttons and a switch instead of a button to disable daylight time.
Recently I bought a newer Lacrosse analog clock for my office which supposedly decides the enhanced WWVB time signal (able to read a weaker signal). I ‘d like to upgrade the mechanism in the old clock if it will fit in the same form factor.
Hey Eric, we are thrilled you have enjoyed our wall clocks for such a long time and appreciate the comment. For a better understanding of our clock movements, our updated video here: bit.ly/wallclock_setup could also be helpful. As for replacing a radio controlled clock's movement, unfortunately, this is not something we'd do as the calibration process with its hands is performed at the factory level. In these instances, we'd recommend updating the older model as well. For help finding the correct item (and to receive a loyalty discount) please reach out to our store directly at 608-785-7939 or via email at: store@lacrossetechnology.com 😊
Thanks for the video, it helped. I wasn't exactly sure on how to set the time zone. I have troubles every time daylight savings comes around like today. Hopefully from now on I won't have any trouble. I've had my La Crosse clock for years, works great!
Thank you for your kinds words. If you have any issues in the future contact us on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page
I have a Lacrosse Model WT 3144 and the La Crosse web site doesn't even list this model to get a manual. This looks just like mine on the back, great video.
Hi Tom, sorry about that. Our website is picky and requires you to enter the dash in between the WT and 3144 (WT-3144) in order for it to show up in the dropdown. But here's a link to your manual if you still need it: www.lacrossetechnology.com/media/catalog/product/w/t/wt-3144s_072117.pdf
I just went to the company web site and put in my search as WT-3144 and it comes up with 2 choices of WT-3144P and WT-3144S after looking at both of the manuals the back of the clock where you do your settings looks nothing like mine. My clock looks like the one in the video. Hopefully the company has a manual so I can print it out for future use. Thnaks
@@Tom-qn5nd, sorry about that. This item did indeed get updated to a newer movement a few years back. If you have an email you'd like us to send the old manual to, please pass it along here or privately on our Facebook or Twitter page. Alternatively, you can message our support team here: www.lacrossetechnology.com/support/index/form/ as well, but this may take a bit more time. Sorry again for the confusion.
bit.ly/LaxTech_Facebook
bit.ly/LaxTech__Twitter
3 to 5 nights, what a convenience!
My clock is an Emerson model CKS2005N, I have looked for updated models but no luck. I've had it for many years, at least as far back as the 1980s.
Gotcha, well this actually is not an item that is made by us, so we cannot give a definitive answer, but our guess would be if you've been using it since the 1980s, adjusting the dates for the DST setting is likely not an option. If you're looking for an upgrade, we'd highly suggest our S87078: www.lacrossetechnology.com/s87078/ which can be found for a better price on our Amazon outlet store: bit.ly/S87078_Amazon
In addition to Arizona and parts of Indiana, the province of Saskatchewan, where I live, stays on Central Standard Time all year round and does not observe D.S.T. On most days, the clocks set themselves within 5 minutes, depending on time of day and weather condition. Also I have used AA lithium batteries in these clocks with no after effects, getting close to 2 years from them, simply because they last longer.
I bought a Atomic digital clock with indoor/outdoor temperature. The outdoor temperature is always dashes. How do i fix this?
Nice! Consider using your Smart TV as a wall clock
Hello Terry,
I have a La Crosse WT-3181P, and i moved to the Atlantic Time Zone recently. Since the clock only has 4 time zones (PT, MT, CT, and ET) I thought I would try the manual steps. I removed the battery for 15+ mins, hit the manual set tab 20 times, then put battery back in and set the time. Still found the ET zone and my clock went back 1 hour! hehe Any suggestions?
Jan 13, 2017 - I just purchased a used SHARP WWVB radio control clock. Luckily, the movt you featured in your video matched perfectly my wall clock with hands. It's running GREAT right now. Only a comment and a question... I wish the "No DST" button was better labeled. Or showed an LED or a "BEEP!" sound showing it's enabled. It's a bit of a guessing game. Q: There is a small black hole left hand side of the movt with two wires or leads I can see. Do you know what that hole is? Is that the WWVB antenna? Take care, ~ Dave in Rochester NY
That might be a reset contact. If the controls don't work or the clock gets wonky you can take the battery out and close the circuit by placing the blade of a metal screwdriver or a paperclip across the prongs to ground out any residual power and restore the clock to its original setting.
If in California, should you set the clock on an east facing wall?
So it is facing Fort Collins, CO would have been a more accurate statement. 😬 Sorry for the confusion. Our updated wall clock setup video here: bit.ly/wallclock_setup offers additional insight on this an other clock models.
My best watches!
3 to 5 days to pick up the signal? Might as use the manual setting.
Good luck! If you figure out how to MANUALLY set this !@#$ thing, please post a video showing how. I just put mine outside for a few days after every battery change.
@ckeilah remove all batteries from the clock, press the tab 20 times, wait 15 minutes than put the battery back in and when the hand stop at 4,8,12 o'clock position press the set tab again to move the hands and after 2 minutes of no activity the clock is set
We have 3 of these in MA that one of my clients bought. They have never worked (they are made by a different vendor, made in China, called Chouchin). Each of them was left on with new batteries for 2 weeks and the time was never correct, so they were set manually, like a 5 dollar clock from Walmart. One does have to wonder why it needs to take 3 to 5 days to set a clock.
Hi Jim, we are truly sorry your clocks were unable to pick up the WWVB radio signal from Fort Collins, CO. right away. The reason it can sometimes take 3-5 nights (or possibly longer) is due to your location, both geographically and where you have the clocks placed within your home. Moving these away from other electronics and near a window with the front or back of the clock facing Fort Collins will greatly increase your chances of receiving this signal. For more information please visit our website here: www.lacrossetechnology.com/atomic-time/ and use the NIST and Smithsonian links to learn about how exactly these work.
If you believe these are defective, feel free to contact our support team here: www.lacrossetechnology.com/support/index/form/ to work out a possible replacement.
Sorry again for the inconvenience.
Mom just bought a Howard Miller wall clock for $4 at a yard sale which retails for almost $200! Let's start hitting those yard sales for bargains.
Same here, got a Murrow version that retails for 170 and got it for 9 dollars, like new condition as well.
Why does the clock have to be in a "west-facing window"?
Colorado is EAST of where I live.
Apologies for any confusion. This was corrected and improved in our updated wall clock setup video here: bit.ly/wallclock_setup
Same. I live in the West Pacific.
Hawaii? Any way to manually set the time to Hawaiian time?
If you own a clock with a movement like the one in this video, it cannot be set to Hawaiian time for atomic connection. However, it can be set manually following the instructions covered in our updated video here: bit.ly/wallclock_setup -- But we should note that if the clock does receive the WWVB signal, it will automatically set to Pacific Time as shown in this video. For atomic connection and the ability to set to Hawaiian time, we would recommend our UltrAtomic clock: www.lacrossetechnology.com/products/404-1235ua-ss. Our apologies for any inconvenience.
Oh my gosh thank you for this
I have an ultratomic clock which have a complete different movement and there are features that I don't know what it is meant for such as ECO mode, so how can I do this?
Hey Bukui, sorry for the confusion. Our suggestion would be to review our updated wall clock setup video here: bit.ly/wallclock_setup -- If you have any further questions please just let us know.
La Crosse Technology thank you, that also mentions the ultratomic movement
Hello, I have recently bought a La Crosse Technology WT-3122A 12 1/2-Inch Wood Atomic Analog Clock, but haven't set it up yet. I live in the Pacific coast region. Since the default is PT, do I just put the battery in and leave it? Or do I push PT again?
Thank you. I was worried that I would mess it up. I love La Crosse Technology!
What is the two prongs connection at the back ? to connect antenna ?
These can be found on some of our older movements, and if you touch something metal to them, briefly, the hands should align to the 12 o'clock position and stay there until the atomic (WWVB) signal is received.
The model number is WS-8117U-IT
A better design would be to have the ability to set the time manually and then when it picks up the signal to fine tune itself. Then it would always function as a clock under any circumstance. I got the hand me down from work because it takes too long to adjust itself.
Hi Chev, this is actually an option on most of our models. We just recommend to wait for the signal, however, the clock itself can typically be set manually as well, and once the signal is received it will override your manual setting. We apologize for any confusion.
@@lacrossetechnology I'm glad you have fixed the design, luckily this one will have a good use in my house.
What are you talking about, my clock adjust April and Oct only. What I want to know is how to change that to Mar Nov to reflect current time changes and no new clocks have been created. What I have to do is change time zones to show EST to DST and back. I have 7 zones to select from.
This may indeed be a limitation to your specific model, but we will need to know the model number of your device to know for sure.
I need to learn how to set the clock with Pacific Time. Can I have a step by step to do it?
La Crosse Technology The clock model is WT-3143-14. Thank you for help.
I'm in PST zone my click is always 5 min ahead then actual time how do I fix this plz help.
I know this is probably a dumb question but when I set up my clock, it did the whole thing demonstrated in the video and landed on twelve. Then after seven minutes, it started without fixing itself. (eastern time zone) Is that what it is supposed to do?
It started working overnight. Thank you anyway!
Hi I have WT-3161 long time and I leave in Toronto. So far working properly but I always have a problem with DST. It didn't adjust itself. I reset many times and pick up the signal but shows always normal time, not DST.
Hi, my clock is WT-3161 not WT-3161 WH and there isn't DST switch.
What's the difference between the WT-3161 and the WT-3161WH? I thought they were the exact same clock, just with a black background or a WHite background face. La Crosse Technology's comment makes it sound like there are mechanical differences with the mechanism. Perhaps that's why NOTHING happens when I hit the "manual set" button, now called a "tab"...?
Guys I figure out the technology behinds this.
It basically sends a signal which is picked up by a boy with a white horse.
The boy will then ride to the La Crosse "Technology" headquarter and ask for the time and then ride back.
This approximately takes 3-5 days depending on where you live.
An interesting explanation to be sure, however, our clocks are actually radio controlled by the WWVB signal broadcasted from Fort Collins, CO. You can find more information about the signal here: www.nist.gov/pml/time-and-frequency-division/radio-stations/wwvb As this is a radio signal, the time it takes for your clock to receive it truly does depend on where you live and where you have the clock set up. Moving it away from other electronics, near a window, with the front or back of it facing Fort Collins, CO can help improve your chances.
All of my clocks are radio controlled. Since I live in east central Saskatchewan, when conditions are perfect, it usually takes 3 to 5 minutes for the clocks to set themselves. When I found out that WWV and WWVB radio stations plan to shut down, I was pretty upset due to lack of funding. It seems pretty obvious that this govt seems to spend large amounts on money on stuff that is not even needed. This radio station will be 100 years old this year and will be sad to see it go. This govt does not seem to think that this radio station is still considered a essential service and a lot of people still use this service. Funding was never a problem for this radio service until the current govt got elected. People who use this service should contact the people in charge about this topic and them to provide them with any kind of help they can because a lot of people in North America still rely on these services
Would we get a good signal here just outside of Dallas? Thanks.
Hi Sue, we do not believe you should have any issues. For the best possible reception, have the clock's front or back face Fort Collins, CO and hang it away from other electronics.
Would be near an electric radio and my PC!
@@suelieber5106 Still shouldn't be a big issue, just may take a few nights to receive the signal.
@@lacrossetechnology Excallent. Thanks so much for your advice.
Good news, I found a LaCrosse Tech weather station on eBay for under $30.00 . I assume it has auto update capacity. I will read details before buying. Always a good idea on eBay and Amazon, Cavite Emptor you know. Thanks a Million.
Another good idea would be to check our website as well, and make sure the item has the features you're looking for. We're here if you have specific questions.
nigeria time zone(WAT) is not available, what time zone do i use for nigeria from the available options.
The clock may be set manually to any time that you desire from what the instructions say.I set mine manually before I knew that.
boss , good day . this technology works in philippines timezone?
You're a long way from Boulder Co. You should look for clocks marketed for your area and even then if that area of the world has a long-wave time standard transmitter. Otherwise, a manually set quartz movement is the way to go. These clocks can be manually set but then you have to reset it yourself for daylight time changes. Another option is to look for clocks that use signals from the constellation of gps satellites.
My battery ran out. I replaced it with a new batter, and it started up quickly and went to 12:00. I am in Florida. It has not moved from 12:00 for over two weeks. I tried another fresh battery.... Nothing! Can you help?
Check the sunspot activity, put the clock OUTSIDE, AWAY from all electrical devices, cords, etc. during a LOW sunspot time AT NIGHT. Your clock is trying to "hear" a very weak signal, from very far away, with a LOT of noise. If it doesn't work at your location, try again in a more remote location. The idea is to find a place where the clock can "hear" that weak signal over the noise of the environment. Sunspots create noise too. If you want to listen for yourself, just build a 60KHz receiver radio and listen to the signal and noise. Move around and see if you can get a stronger signal in certain places, and how loud the noise is. If you find a certain place/orientation/time that gives you a nice loud signal, put your clock there, and wait. Good luck!
So we got one of these clocks but live one time zone ahead of Eastern Time Zone. Everytime we would use it, it would alter time and end up 1 hour behind as expected. However I think I have a solution! I just pulled the hands off and will leave it a night or two to find it's time! Once it has will press them back on to our correct time and it should be fine, the hour hand being one hour ahead of what it thinks it is set at. Fingers crossed this works!
Hi I will check tomorrow as I have left work. Bascially I work for a school on the island of Bermuda and had thought your clocks would be perfect for us. However once I read the details on your website realised they would not.
Then a few months ago a local shop was selling them and the shop purchaser said they work fine and they have had no returns. So I got it, but every morning it would rest itself to be one hour behind, eg Eastern Time as selected on the back.
A few days ago at a friends he had the exact clock and he said he had the same ssue, but he opened the clock mechanism and cut the ariel so it can't get the signal.
Then I just thought, pull the hands and let the clock reset to ET, then tomorrow I'll go online to get the world clock time for our region ie +1hr ET and press the hands exactly to this. The clock should just keep this setting, albeit thinking its set at ET not +1hr ET!
I think this is the best we can do? I wonder at night how far the signal travels as maybe there is a market in other places outside the US if it had more time zone options on the back?
`will check when back at work tomorrow, then let you know.
Model: WT3143Ax1
Absolutely if you have a recommended model for our time zone would be awesome to know. I'll find out in a day or so if the realignment of the hour hand works on this one.
that looks like the ticket there! Perfect will look to see if I can order a few for the school when I get the opportunity!
I’ve had this clock for quite a few years and the last couple of years I’ve had soooo much trouble once the battery dies. When I put in a new battery it will just spin until the battery dies. I’ve somehow gotten it to stop but I have no idea what it was I did. I’m so tired of this. Please help. I’m in Southern California.
We are deeply sorry for the trouble and any confusion with your atomic clock. Our first suggestion would be to review our updated clock support video here: bit.ly/wallclock_setup -- It is much more detailed and goes over the setup steps for all of our atomic clock movements. If you're still having issues after this, please reach out to our support staff here: bit.ly/contact_techsupport -- they'd be more than happy to help get this figured out.
Ive just brought a quartz vlock it looks like a bottle cap i have put a battery in it and it didnt spin ??
The model no is 6168 the clock is ticking but hands are not moving at all :(
does it have to always face west for it to work or can i move it to another part of the house
Hi Rebecca, for the best WWVB reception we recommend having the front or back of the clock face the direction of Fort Collins, CO. However, in many cases it will pick up the reception just fine if not facing directly that way. Our updated video here: bit.ly/wallclock_setup may be helpful as well.
@@lacrossetechnology thank you
it set to correct time this morning, where i want to put it the front will face west but not near a west window
@@rebeccahickey8610 We're pretty confident if the item picked up the signal from your location before, it should have no issues in this new spot.
I have accidentally pressed the DLS button. I am in Massachusetts and did not need to however my clock is still. Will this affect the proper time once it picks up a signal?
Hi Cassidy, we are assuming you mean DST button, but to answer your question, yes, your clock will be 1 hour behind after it picks up the WWVB signal. The good news is that once it receives this signal, you can simply press the DST button once more (and only once) and your time will adjust. Please let us know if you experiences any issues.
LaCrosse clock wt3143-h I have it just keep spinning over and over . I replaced new battery and still the same result .
Hi Roberto, sorry for the trouble. Can you confirm that the battery installed in your clock is a new reputable regular alkaline battery? Other battery types can cause some undesired results. As noted in our updated video here: bit.ly/wallclock_setup the hands continuously spinning is often a sign that the battery is under or overpowered. If another battery change still does not do the trick, please try resetting clock. These reset instructions are also covered in this updated video. Of course, if further help is needed, please reach out to our support staff directly here: bit.ly/contact_techsupport -- We apologize for any inconvenience.
@@lacrossetechnology Thank you for responding to me and I have tried Procell, Pairder, Northern and Energizer. According to your comment and only regular alkaline battery would work? I haven't tried that type of battery, I will buy tomorrow , and will get back to you if that work. Thank you again
Just include a manual dial to spin the clock backwards to set time. I'm at work having to naturally hold set all the way around. And you dare not pass the at time..... cause you gotta go all the way around again. I hate these clocks!
We're sorry for the inconvenience. As shown in our updated video here: bit.ly/wallclock_setup, your work may benefit from a non-atomic option if their clock(s) cannot receive the WWVB signal for automatic time-change updates. Our non-atomic options have a much more straightforward setup and design, much like what you described. Our full selection of analog clocks can be found here: www.lacrossetechnology.com/collections/analog-clocks and our team is always here to help answer any questions.
Hi Terry, I have a SkyScan Model 28700 clock that the minute hand is zeroed 1 minute behind every time. How can I fix this?
Hi Christy, unfortunately if the hand is out of alignment like this, there isn't an easy fix. Without a professional, trying to fix this on your own may cause more damage. Since this is quite an old model, our suggestion would be to reach out to SkyScan directly here: skyscanatomicclocks.com/support/ We apologize for this inconvenience.
Thank you for your reply. I fixed my minute hand alignment problem this way... First installing the battery and letting the clock search for a radio signal and when it stopped at one of the 4, 8 or 12 o'clock positions, confirming that the minute hand stopped one minute behind. I removed the battery so the hands would not move, then I removed the clear plastic front. Not moving the hand forward or back, I carefully lifted the minute hand enough to where it was loose on the shaft. Now I was able to align the hand, then press it back down tight on the shaft. I reinstalled the battery confirming that the minute hand was landing right on the 12 when it stopped during search mode. It was, so I reinstalled the clear front, went through the time set procedure and now it is always the correct time!
@@christyreuber1377, nice! Quite a creative solution. We're happy you were able to figure out a way to make it happen. :)
My atomic clock auto adjusts in April and October, I haven't found one that is updated for March and November. Can anyone help. Frankly I get tired of the forward and back bull. Why not leave it at DST noon feels more like .noon in the summer then in the winter.
Hi Dano, this is quite strange, as all of our devices that use the WWVB Atomic Radio Signal coming from Fort Collins, CO will update and sync to the correct time on the correct dates each year (assuming the device is receiving this WWVB signal). Could you pass along the model number of your clock?
what is the 2 prongs for on the reset for and how do you reset?
Hi Elvira, we're not sure what specifically you're referring to with the "prongs", but the reset steps are covered in this video starting at the 2:54 mark.
I own this clock, and sadly it's been 2 weeks now and it hasn't switched to the correct daylight savings time, it's still one hour ahead.
Hey Baris, our apologies for the trouble. It sounds as though your clock has lost its connection with the WWVB signal. To help reestablish this, we suggest performing a reset which is covered in our updated support video here: bit.ly/wallclock_setup -- If you should need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
When I first see this clock I was scared because this is my first time seeing a analog clock can set itself. LOL
My minute handle doesn't move,how can I fix it?
Hi Michael, we'd first recommend following the reset steps at the 2:54 mark in this video (assuming you have this type of movement). If the back of your clock looks different, please review our updated video here: bit.ly/wallclock_setup which will go over how your specific clock will function. If after resetting your clock with a new battery, your minute hand still does not move, please reach out to our support team here: bit.ly/contact_techsupport -- they will help figure out a solution. We apologize for this inconvenience.
I actually found an atomic clock, La Crosse for under $20.00 refurbished. Your's were selling for $109.00.
Sounds good. If you have questions in the future, just let us know.
Thank you, I will.
what do you do when it's constantly 15 minutes fast?
Assuming you have a model with the clock movement pictured in this video, our recommendation would be to remove the batteries, press the Set Tab at least 20 times, and wait about 15 minutes before installing new alkaline batteries. After this, follow the instruction as normal waiting for the clock to receive the WWVB signal, once it does, press your correct time zone button to have it set to the correct time.
If this proves ineffective and your clock remains 15 minutes fast, please reach out to our support staff directly here: bit.ly/contact_techsupport as your device may need to be replaced. We apologize for this inconvenience.
I have reset my clock multiple times lately and it will not stay on Pacific time. It keeps resetting to 1 hour behind. Help!!!
Hi Chelie, if you've followed the reset instructions starting at the 2:54 mark in this video, and are still having this issue, please contact our support team here: www.lacrossetechnology.com/support/index/form/ They will be able to give more detailed feedback and/or help get you a new working clock, should that be necessary. We apologize for this inconvenience.
@@lacrossetechnology I sent an email as requested but have not heard back from tech support.
Hi Chelie, we apologize for the delay. Our support team works as fast as possible to move through their queue, but it can sometimes take a few days to receive a direct reply. If you could pass along your email address we may be able to speed up this process. Sorry again for the inconvenience.
Chelie Middleton I can
jeez that sucks - having to wait for up to 5 'nights' for your clock to catch on to what time it is.. (and I think it probably will not show the right time of day either, whilst it is waiting for 5 nights?! ) there seems to be absolutely non logic to this - it cannot be that Col. only once every three of five days sends the time code, and it also makes no sense in that this man does not know whether you try to put your clock into operation on Monday or in Friday, so it seems it is this crazy clock itself that will only decide you switch on and start reacting after quite a while! not exactly superior a product.
Okay, that sounds a whole lot better, let's then agree that describing it as a process that might take up to five days (or was it nights) was maybe not the smartest possible way to put it if you would try to build some positive image for this thing. If you would instead explain it as you do right now, saying in worst conditions (whether, reception) it might take a while, that might install more confidence with your potential buyer? If the clock can set to the signal every few minutes ago through the day, I still don't understand that 'five' day thing though.. shouldn't that just be, for a long as heavy overcast or bad weather lasts, as long as the clock is not put up inside a vault or some place alike? Thank you for responding by the way, grs
You said two things that might be in conflict. You said to point the clock in a westerly direction. Then you said Colorado is where the signal is. I'm in California, so I would point it Easterly!!!
You are correct, please make sure to have the clock facing Fort Collins, CO. for the best reception. Sorry for the confusion.
How do you point the clock to Colorado. The back pointed to colorado or the front pointed to colorado
@@yodaddy6586, either. Just so one of the large flat sides are facing in that direction. This helps the antenna inside pick up the WWVB radio signal, which often happens at night.
My clock gains about 4 minutes a day. What do I do?
This can mean that your clock isn't picking up WWVB signal or that it is wearing out. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We apologize for the inconvenience and look forward to helping get this corrected.
And where is the MANUAL SET VIDEO LINK? That's really the only way to reliably run these stinkers! We had these at work and they never set. Dumped them. I took a few home, but seriously - "put them in a west-facing window for 3-5 nights" and hope they catch a signal? "Press the side button 20 times to drain power"? Get a wall clock and set it by your smartphone time. These radio clocks are an antiquated exercise in frustration.
We apologize for the frustration, some locations have a harder time than others picking up the WWVB signal coming from Fort Collins, CO. If you would like to set the clock manually, we'll need to know your item's model number to offer specific instruction. Sorry again for the troubles.
Since there is talk that the NIST plans to shut down the WWV, WWVB and WWVH radio stations, is La Crosse Technology going to still manufacture products that use the 60 kHz time code to set the time? There are still a lot of items used in North America still rely on this to set time and if enough people would pressure the government and or congress to help with more funding, then it will survive simply because a lot of people, myself included, rely on this station for accurate timekeeping. If the government has money for other stuff, they can at least give them the money that the radio station needs to keep operating. I will be very disappointed, and I`m sure others will be, if the radio station shuts down for good.i
Hi Darrell, we completely agree, it would truly be an unfortunate thing if these systems were to shut down, however, until that time we cannot comment on our company's plans moving forward in this regard. We appreciate your support and understanding on this matter.
@@lacrossetechnology You could produce these clocks to synch to the GPS/GLONASS/Galileo satellite time signals instead. Each satellite carries its own Atomic Clock on-board.
Oh sorry. Forgot about China's BeiDou satellite system. It too could be used to receive accurate atomic time.
@@lacrossetechnology see
Its interesting technology, but my clock is more trouble than its worth. Mine often goes to the wrong time. But it works well the rest of the time
Hi Riah, we apologize for the troubles with your atomic clock. It sounds as though you may be in a region that struggles to receive the WWVB radio signal normally, so you might have just gone and set the clock's time manually. We should note that once the clock does receive this WWVB reception it will override any manual setting (likely what is happening in your situation). So, it is important to follow the steps in this video, or in your item's full manual, to make sure you have the clock set to the correct time zone and Daylight Saving Time setting to avoid these incorrect times. Our video here: bit.ly/find_product_manual will help walk you through how to find your clock's full manual on our website. But please just let us know if you have further questions.
@@lacrossetechnology Thank you, very kind.
thank's
why so much hate?
Too late to cancel my order .. once it arrives I’m immediately returning it .. way too much fuss here to get a clock to work ..
Hey Tony, we are truly sorry to hear this and apologize for any confusion. We do have an updated video on this topic here: bit.ly/wallclock_setup that may explain things a little more clearly. Once you're able to get your cock up and running, there's little more you have to do after that. Of course, if you have any questions or concerns, please let us know we are here to help.
How is that too much to do? What do you think these are magic clocks? I have had mine for years and never an issue. Buy yourself a digital clock if these are too complicated for you.
Why choose this kind of clock over conventional clock. What a hustle.
Thanks for the question, Ali. The main reason many choose an atomic, or radio controlled, clock is due to their accuracy. These clocks are able to sync up with the NIST's atomic clock via the WWVB radio signal coming from Fort Collins, CO. If time accuracy is important, an atomic clock is often one of the best choices. For more info on the NIST and WWVB signal, please visit: www.nist.gov/pml/time-and-frequency-division/radio-stations/wwvb -- If you own another one of our wall clocks, and are having trouble, we highly suggest reviewing our updated video on this topic here: bit.ly/wallclock_setup
I have an atomic clock
The people who designed these clocks belong in prison. 3-5 nights just to set a clock??
It is ridiculous. There's not much point to the whole thing.
Bravo!
I check a lot of woodworking handbooks. These one from woodprix are the best.
Extremely complicated instructions, with no way to know if anything is working correctly, or received the signal or is continuing to receive the signal. It is the next thing to being 100% useless. I had one and of course it never worked.
We are truly sorry for any trouble you've had with our Atomic Wall Clocks, and invite you to view our updated video on this topic: bit.ly/wallclock_setup -- It covers how this technology works and goes over how to get these set up manually in the event you live in a location where the WWVB signal does not reach.
My clock will not sync up with wwv. My radio picks up wwv no problem. It's junk. it's going back.
Hi Alex, we're sorry to hear this and apologize for the trouble. As mentioned in the video, this syncing process can sometimes take a few nights depending on your location. If you have further questions or would like to work through the process with our support staff, feel free to message our team here: bit.ly/contact_techsupport
This is the stupidest clock, it may take 3 to 5 days?????
The reason it can sometimes take 3-5 nights (or possibly longer) is due to your location, both geographically and where you have the clocks placed within your home. Moving these away from other electronics and near a window with the front or back of the clock facing Fort Collins, CO will greatly increase your chances of receiving the WWVB radio signal. For more information please visit our website here: www.lacrossetechnology.com/atomic-time/ and use the NIST and Smithsonian links to learn about how exactly these work.
I have three of these clocks and they sync up in minutes and have lasted years
Buy the ultratomic version, it only costs 30$ but it takes only 1 minute
3 to 5 days??? i can set my cheap manual clock now
We apologize for any inconvenience, this is a limitation of the WWVB radio signal and will largely depend on your location and the clock model you own. This is explained in a more detail in our newer video here: bit.ly/wallclock_setup
3 to 5 days??? I set my cheap wall clock manually in 3 to 5 minutes😄
Seriously, so the clock is literally useless for 3 to 5 nights. Just go to family dollar and buy a regular clock
You can still set the clock manually if you wish, just know that once the signal is received it will override your manual settings. For item specific instructions, please refer to your full manual, which can be found using the steps in our video here: bit.ly/find_product_manual
It's much more accurate than a regular clock, my old clock always go off 3 minutes every week and I replaced it with this and now it's not even a single second off
22:22
Kalibrera tiq summertime
Raaaaaaaaap moster
En español
Hey Maria, our apologies for the lack of Spanish support. We'd recommend reviewing our newer video here: bit.ly/wallclock_setup on this topic that does at least offer Spanish subtitles. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
This makes no sense. Why would i put this is a west facing window? Dude says that it needs to be facing Colorado. How is a signal from Colorado making it all the way to my house in California? There's a bunch of huge mountain ranges between me and Colorado plus Colorado is too my east. This video debunks the round earth theory and absolutely proves the earth is flat
Hey Travis, we are deeply sorry for any confusion. Please see our updated video here: bit.ly/wallclock_setup and let us know if you still have questions.
Literally stop being rude
Use: cyber security bust NTP scammers
Was there something we can help you with regarding your atomic clock or any of our other products?
barbie dreamhouse
Clocks are completely useless. Nothing but a gimmick.
We are truly sorry for any trouble you've had with our Atomic Wall Clocks, and invite you to view our updated video on this topic: bit.ly/wallclock_setup -- It covers how this technology works and goes over how to get these set up manually in the event you live in a location where the WWVB signal does not reach. We apologize again for any inconvenience and are always happy to help in any way we can.
What a ridiculous, convoluted system...
Sorry you feel that way, Christian. Is there something we can help you with?
wasted engineering
+/- ??
Hummm we're not quite sure what this is in reference to, but if you have a clock similar to the one in this video, we highly recommend reviewing our updated video on this topic here: bit.ly/wallclock_setup